MR762/MR308 Precision Shooting - Show Your Groups?

HKSniper11B · Dec 5, 2023

What has been your experience with the H&K Rifles, and what kind of accuracy and distance are you getting with them?

I wished to start a thread showcasing various distances and precision of the Heckler & Koch MR762 (US) and MR308 (Europe) or, if possible, those who have access the M110A1 CSASS/SDMR. I have about a year on this platform, and have worked hard testing factory loads. I have an extensive writeup on this platform on HKPro HERE but, I wish to focus specifically other's extensive expertise of precision and long distance shooters here.

For those who respond with their own shot groups, please share the following:
1) Which Rifle? (MR762, MR308, M110A1, G28, G27)
2) What Barrel Profile? (Barrel Length, Heavy or Medium Contour)
3) What round used?

Included are some of my best groupings. Both rifles I run are Heavy Contour 1:11 Twist 16.5" Barrels. DOPE is as identical as they can get with the two. For the tightest groups, they seem to love the Hornady TAP ELD AR 168gr. Running the Federal Berger 185gr Juggernaut has been a laser beam out to distance. I plan on reporting more as I train and compete more with these two.

I rarely post, but I hope I can be more active here as I get out and shoot more. Thanks for indulging me.

Near miss · Dec 6, 2023

Have shot MR762 A1 plenty of times.
Have seen them shot by skilled shooters with incredible precision AND accuracy.
Mostly fed with scenars, 168 or 175.

Sierra 168s from PMC worked also miraculously. 308 bulk ammo is what it is but it certainly is not bad with them and they are very lot dependent.

HKSniper11B · Dec 7, 2023

Near miss said:
Have shot MR762 A1 plenty of times.
Have seen them shot by skilled shooters with incredible precision AND accuracy.
Mostly fed with scenars, 168 or 175.

Sierra 168s from PMC worked also miraculously. 308 bulk ammo is what it is but it certainly is not bad with them and they are very lot dependent.

Here's to hoping others show what they have and what they've accomplished.

I've "heard" from many what they can and cannot do with this rifle, along with how good, or how horrible, it is. I've heard incredibly horrible reviews on the M110A1 CSASS from B4 qualified Army Snipers, as well. While I have my own year of experience behind the trigger, and I consider it quite capable from my own imperical data, it is my hope to see for myself with shotgroups and grouping data/measurements from others.

I have zero experience with Lapua rounds. Sounds like I'll have to try it out and see what I kind of groups I can get. I appreciate your input.

frankintank · Dec 7, 2023

I'll work on adding some groups to this as I am able

HKSniper11B · Jan 28, 2024

Been a while. No updates from anyone?

HKSniper11B · Apr 17, 2024

Hornady TAP ELD AR 168gr @2457-2486fps
MR762 LRPIII Heavy Barrel 1:11 16.5"
1200 yards at a 24x24" target at 15.7-16.1mil, repeated hits with effective wind calls.
1000 yards was extremely consistent at a torso sized target at around 14mils.
Range: Cameo Shooting Complex, Palisades CO (5250-5300ft elevation)

Near miss · Apr 19, 2024

One 417 A1 started shooting wild. Mostly 2-3 rounds within moa and then one or two could be 2 moa away.
It turned out its front take down pin had cracked. Apparently the A1 model's pins that are opened by sticking a bullet in (or the key contained in the stock) are not strong enough.

The rifle has a lot of training done (I am guessing a bit of use-abuse) with and 20kish rounds through.

New pin was easily ordered from Germany.

DKN83 · May 5, 2024

G28 steel upper, german army setup from HK including the optics that are not available from S&B, only via HK.

Unshot, will be back with more data and targets asap. Will be using Lapua 175gr Scenar-L first.

That dog though...

BCP · May 5, 2024

Near miss said:
It turned out its front pin had cracked

Trigger or takedown pin?

noobinacan · May 5, 2024

absolute pinnacle. robust. exceptional...PSG's eveloution.
german engineering at its finest.
hope you brought it home in your 911 GTS!

DKN83 said:
G28 steel upper, german army setup from HK including the optics that are not available from S&B, only via HK.

Unshot, will be back with more data and targets asap. Will be using Lapua 175gr Scenar-L first.

That dog though...

Nik H · May 5, 2024

I have fired my bud's MR762 A1 many times. It always shoots well but it shoots best with FGMM. Weight don't seem to matter as it shoots well with 168 SMK, 168 TT, and 175 SMK. I've been on the fence about adding one to my stable. My HK rifles are old models. I still enjoy shooting my SR9T...bought it new for about $900. It loves FGMM 168.

I am very thankful that better scope mounting options and handguards that allow integration of bipods are now available.

HKSniper11B · May 5, 2024

Nik H said:
I have fired my bud's MR762 A1 many times. It always shoots well but it shoots best with FGMM. Weight don't seem to matter as it shoots well with 168 SMK, 168 TT, and 175 SMK. I've been on the fence about adding one to my stable. My HK rifles are old models. I still enjoy shooting my SR9T...bought it new for about $900. It loves FGMM 168.

View attachment 8411587

I am very thankful that better scope mounting options and handguards that allow integration of bipods are now available.

Words cannot express how much I'd like to have that exact rifle in my arsenal. I've been dying to compare an MR762 in full PRS setup, to an SR9T/TC. Definitely post up shot data and photos of 5 round and 10 round groupings?

I'm pretty sure I have a photo of your rifle saved from years ago when I was doing homework on the SR9T. That said, my MRs also like FGMM 168/175gr.

Nik H · May 5, 2024

HKSniper11B said:
Words cannot express how much I'd like to have that exact rifle in my arsenal. I've been dying to compare an MR762 in full PRS setup, to an SR9T/TC. Definitely post up shot data and photos of 5 round and 10 round groupings?

I'm pretty sure I have a photo of your rifle saved from years ago when I was doing homework on the SR9T. That said, my MRs also like FGMM 168/175gr.

I'll post some groups next time I bring it out. It doesn't get shot much

jLorenzo · May 6, 2024

DKN83 said:
G28 steel upper, german army setup from HK including the optics that are not available from S&B, only via HK.

Unshot, will be back with more data and targets asap. Will be using Lapua 175gr Scenar-L first.

That dog though...

View attachment 8411357 View attachment 8411358 View attachment 8411359 View attachment 8411360 View attachment 8411361 View attachment 8411362

Any idea why the pic rail does not continue to the end of the handguard? Maybe too much flex? What kind of dog?

Dogtown · May 6, 2024

Mine is a 2015 era factory MR762 with G28 furniture - still same barrel. It's been pretty picky about bullets it seems - didn't like 175SMKs or Berger OTMs, but loves 175 Scenar-L for some reason.

DKN83 · May 6, 2024

jLorenzo said:
Any idea why the pic rail does not continue to the end of the handguard? Maybe too much flex? What kind of dog?

There is a zero shift if you move the bipod to the front at some point. They noticed during testing and decided to restrict that area from mounting a bipod.

Its a bayrischer Gebirgsschweisshund

We have her with us for hunting. She can track hit animals to the end of the World. Incredible skills and very gentle and sensible.

HKSniper11B · May 6, 2024

Dogtown said:
Mine is a 2015 era factory MR762 with G28 furniture - still same barrel. It's been pretty picky about bullets it seems - didn't like 175SMKs or Berger OTMs, but loves 175 Scenar-L for some reason.

Strange. My loves 175k SMKs and loves Federal Berger 185gr Juggernauts even more.

Dogtown · May 6, 2024

Yep, no rhyme or reason. That's barrels for you.

DKN83 · May 21, 2024

First Session today, shot an hour before with my TRG, Bad idea, concentration went downhill at some point. Still happy with the results, need to adjust the stock and get used to the trigger. Pretty sure there is way more to achieve with this setup. Marked 2 shots i completely pulled. Best Group 0,8MOA worst around 1,1MOA if i remember right. Was shot from right to left(tighter groups were right), cant turn the picture somehow...

- Lapua match 175gr fabric ammunition
740m/s without, 745m/s with suppressor.
- G28 steel upper, 16,5"
- 100m
- 5 shots each besides one 2 shot group.
- bottom 3 without supressor, top 3 with
- brass with and without supressor

HKSniper11B · May 21, 2024

DKN83 said:
First Session today, shot an hour before with my TRG, Bad idea, concentration went downhill at some point. Still happy with the results, need to adjust the stock and get used to the trigger. Pretty sure there is way more to achieve with this setup. Marked 2 shots i completely pulled. Best Group 0,8MOA worst around 1,1MOA if i remember right. Was shot from right to left(tighter groups were right), cant turn the picture somehow...

View attachment 8422910

- Lapua match 175gr fabric ammunition
740m/s without, 745m/s with suppressor.
- G28 steel upper, 16,5"
- 100m
- 5 shots each besides one 2 shot group.
- bottom 3 without supressor, top 3 with
- brass with and without supressor

View attachment 8422904
View attachment 8422905

What ammo was this? Custom load?

DKN83 · May 21, 2024

HKSniper11B said:
What ammo was this? Custom load?

Lapua match scenar l regular ammo from the store.

HKSniper11B · May 21, 2024

DKN83 said:
Lapua match scenar l regular ammo from the store.

Damn. That's some expensive stuff. What grain?

DKN83 · May 21, 2024

Yup very expensive, i usually buy 200 rounds with a new rifle and start reloading afterwards. This way i get fireformed brass and got a valid alternative should i not be able to reload.

175gr Scenar-L

Shit in shit out, no way to feed such a rifle with crap ammo

Dogtown · May 21, 2024

DKN83 said:
175gr Scenar-L

Mine likes this bullet best - not sure why, but it's good to see that it works well for someone else.

DKN83 · May 21, 2024

Dogtown said:
Mine likes this bullet best - not sure why, but it's good to see that it works well for someone else.

Use the Scenar-L in my TRG aswell. Actually everywhere available. Great projectile and readily available in Europe

disla82 · May 22, 2024

HKSniper11B said:
What has been your experience with the H&K Rifles, and what kind of accuracy and distance are you getting with them?

I wished to start a thread showcasing various distances and precision of the Heckler & Koch MR762 (US) and MR308 (Europe) or, if possible, those who have access the M110A1 CSASS/SDMR. I have about a year on this platform, and have worked hard testing factory loads. I have an extensive writeup on this platform on HKPro HERE but, I wish to focus specifically other's extensive expertise of precision and long distance shooters here.

For those who respond with their own shot groups, please share the following:
1) Which Rifle? (MR762, MR308, M110A1, G28, G27)
2) What Barrel Profile? (Barrel Length, Heavy or Medium Contour)
3) What round used?

Included are some of my best groupings. Both rifles I run are Heavy Contour 1:11 Twist 16.5" Barrels. DOPE is as identical as they can get with the two. For the tightest groups, they seem to love the Hornady TAP ELD AR 168gr. Running the Federal Berger 185gr Juggernaut has been a laser beam out to distance. I plan on reporting more as I train and compete more with these two.

View attachment 8288930

View attachment 8288928
View attachment 8288929 View attachment 8288927

View attachment 8288931

I rarely post, but I hope I can be more active here as I get out and shoot more. Thanks for indulging me.

What height is your mount?

HKSniper11B · May 22, 2024

disla82 said:
What height is your mount?

3.06" heigh over bore, and the mount is 1.5" 20MOA

VargmatII · May 22, 2024

Another Scenar l 175 grain fan here.
That bullet gave me my furthest first round hit at 1100 meters. Shot with my TRG 22 in 308 win.

DKN83 · Jun 9, 2024

Currently ran about 100 bullets through my G28. What really does not work properly is shooting with the supressor. Groups are around 2-3 times the size compared to shooting without the supressor.

Roughly 0,75 MOA without. About 2MOA with suppressor. Noticed once it got loose. Guess thats the problem. Will try to tighten it with maximum strength next time and see if that works. Anyone else experienced something like that?

HKSniper11B · Jun 9, 2024

DKN83 said:
Currently ran about 100 bullets through my G28. What really does not work properly is shooting with the supressor. Groups are around 2-3 times the size compared to shooting without the supressor.

Roughly 0,75 MOA without. About 2MOA with suppressor. Noticed once it got loose. Guess thats the problem. Will try to tighten it with maximum strength next time and see if that works. Anyone else experienced something like that?

Photos of shot groups or it didn't happen

HKSniper11B · Sep 2, 2024

Been a long time. I'm eager to start shooting the MR again and get more shot data in the near future. So far, the best rounds this rifle has liked is the Federal Berger 185gr Juggernaut which shoots like a laser beam, and the Hornady TAP ELD AR 168gr, both for maximum distance. Federal GMM SMK 168/175gr also perform most excellent, but just don't have the same reach as the Berger and Hornady ELD rounds.

The rifle now has a red dot for indexing, and is HUXWRX Suppressor ready. With any luck, by next year I'll be shooting more suppressed, and getting to run this rifle consistently. I'd also like to switch to the Leupold MK5HD 3.5-18x but, the EOTech Vudu has been running flawlessly and is tracking very well, so its hard to justify.

Here's to hoping more shooting data shows up one of these days from others. So few people seem to use this rifle as a SASS and as such, there just isn't enough PRS or competition data on it. And it can't even be compared to the military rifles due to the barrel being non-chrome lined with different ballistic characteristics.

Just my two cents right now and felt like updating the thread.

HKSniper11B · Sep 2, 2024

Red dot indexing. It isn't as cool looking as the G28. But its what I could put together that would also clear the turrets of the EOTech Vudu scopes. And, easy to side mount any accessories i.e. WMLRF etc. Or, simply remove the tri-rail altogether. It's versatile, which is what matters. And it works.

If I ever migrate to a different scope, I'll likely just do the diving board which then sits everything about a 1/2" lower for the EFLX.

Wizard1183 · Sep 2, 2024

The middle target is 10rd group. Rest are 5 rd. Scar17 16.25” 1:12 twist chrome lined

168SMK imi match brass, 41.5 4064 FGMM 210m hand load. Rifle is sub-moa. Shooter isn’t lol

Dogtown · Sep 2, 2024

Did someone say HUXWRX?

Having trouble using the site?

Subscribe to HideTV with code XMAS20 for 20% Off

MR762/MR308 Precision Shooting - Show Your Groups?

H&K PRS Enthusiast

Major Hide Member

H&K PRS Enthusiast

Looking for MK17 Mod 0 Parts

H&K PRS Enthusiast

H&K PRS Enthusiast

Major Hide Member

Sergeant of the Hide

Lt. Colonel

Sergeant of the Hide

Constantly Learning

H&K PRS Enthusiast

Constantly Learning

Sergeant

Ke = (mv^2)/2

Attachments

Sergeant of the Hide

H&K PRS Enthusiast

Ke = (mv^2)/2

Sergeant of the Hide

H&K PRS Enthusiast

Sergeant of the Hide

H&K PRS Enthusiast

Sergeant of the Hide

Ke = (mv^2)/2

Sergeant of the Hide

Sergeant of the Hide

H&K PRS Enthusiast

Gunny Sergeant

Sergeant of the Hide

H&K PRS Enthusiast

H&K PRS Enthusiast

H&K PRS Enthusiast

Sergeant of the Hide

Ke = (mv^2)/2

Similar threads