I’m an idiot

C

Chubbyduck

Private
Minuteman
Sep 15, 2024
13
7
N.E. Pennsylvania
#1
I bought a Bergara b14HMR 6.5 cm ,well it has a defective mag well and Bergara says it normal trying to say there 10 year gunsmith says its a relief cut there fuckin idiots the fuckin finish is missing its rough aluminum what kind of assholes do they employ at Bergara 20241008_075104_Original.jpeg
 
  • Haha
Reactions: Krob95 and Lange Carabine
#3
Shoulda read here first…….

www.snipershide.com

Bergara sucks ass, buyer beware.

These rifles are pure trash. Against my better judgement I bought a new B14 Sierra Wilderness in 7PRC after already having been burned 2 times by rifles of theirs that shot like crap out of the box (including a premier). The first trip to the range right out of the box it was shooting roughly...
www.snipershide.com www.snipershide.com
 
  • Haha
  • Like
Reactions: Darryle, Terry Cross, TACC and 5 others
#20
I think he is worried about the upper left corner of the magwell and it looks like the final qc felt there was a need to remove some finish and maybe metal removal for mag alignment. Glad they check the function, Village Idiot needs to listen to Begera, recognize this is a production rifle, learn to use punctuation and quit drunk posting. Good luck :ROFLMAO:
1728405351997.png
 
  • Haha
  • Like
Reactions: Darryle and lash
#23
Chubbyduck said:
Fuck off asshole tiered of you assholes that thing your gods gift to the shooting world climb back under the shit pile you came out of
Click to expand...


OIP.jpg




So this is probably not going to get you to receive the input that you are looking for. Might as well walk into a Black Panther party and start dropping N-bombs.

From what I see: It looks like there is some anodizing missing on the finish of your magwell? How does it feed? If it feeds fine, you purchased a mid-tier factory rifle...you can expect that attention to detail on the inside of small parts to be a little less than what you'll see with a TacOps.

From what I've read: If your complaint to Bergara is full of the same colorful language and spelling as well as lacking the same basic grammar and punctuation... Well, all I can say is that I'm not surprised you were blown off. I've seen more coherent writing on cardboard signs held by dudes with three teeth at an intersection, than the abominations your dick-skinners have produced thus far.
 
  • Haha
  • Like
Reactions: Robert4, Darryle, FWoo45 and 15 others
#26
diggler1833 said:
View attachment 8520076



So this is probably not going to get you to receive the input that you are looking for. Might as well walk into a Black Panther party and start dropping N-bombs.

From what I see: It looks like there is some anodizing missing on the finish of your magwell? How does it feed? If it feeds fine, you purchased a mid-tier factory rifle...you can expect that attention to detail on the inside of small parts to be a little less than what you'll see with a TacOps.

From what I've read: If your complaint to Bergara is full of the same colorful language and spelling as well as lacking the same basic grammar and punctuation... Well, all I can say is that I'm not surprised you were blown off. I've seen more coherent writing on cardboard signs held by dudes with three teeth at an intersection, than the abominations your dick-skinners have produced thus far.
Click to expand...
Bwaaaahhhaaaaahhhaaaahhhhhhh
 
#27
Arc Light said:
I am OCD as fuck about my stuff, but that I would hit with a Sharpie and call it good since no one but you will ever see it.
Click to expand...
Ah, a little bottle of cold blue from Brownells would do the job….as if the job actually needs to be done. lol.

And still no response from the OP about function. FFS
 
  • Like
Reactions: stevieb92, Herb Stoner, Arc Light and 3 others
#28
Chubbyduck said:
I bought a Bergara b14HMR 6.5 cm ,well it has a defective mag well and Bergara says it normal trying to say there 10 year gunsmith says its a relief cut there fuckin idiots the fuckin finish is missing its rough aluminum what kind of assholes do they employ at BergaraView attachment 8519855
Click to expand...
You really need to take a step back and realize what you are bitching about. Did you expect that a factory volume production rifle was going to have the finish of a vintage premium custom?

Your expectation is unfounded for a firearm of this type. You’ll likely find little to no sympathy from anybody that actually uses their rifle. If you had just purchased a custom action for what you paid for that whole rifle, I imagine we could see your point.

Right now you’re just tilting at windmills.

Good luck with your rifle. Now take it out and actually shoot it. Use it for what it’s intended.
 
  • Like
Reactions: Terry Cross, TriggerJerk!, Dead Eye Dick and 2 others
#31
Mike Casselton said:
Yeah! And don't try to get on Lash's bad side.
He's waiting on a hurricane and is probably running out of scotch and cee-gars.
He could be in a bad mood. 🤣
Click to expand...
Sorry to hear of your predicament Lash. Good luck with the storm, and good luck with the emergency supplies (Booz and Smokes) you may need it.
As for chubby the idiot, he is probably sleeping off a bad drunk or cleaning his bedroom before his mom gets home.
 
  • Haha
Reactions: Darryle
#33
Mike Casselton said:
I kinda figgered yous guys woulda headed down this way to see what real rain looks like.
Disney will probably stay open.
Click to expand...
No thanks on Disney.

Once was enough, one time too many……

The things we do for love…… 🙄


Plus, me n some squirrely dude got elk tags to try n fill startin Saturday…..
 
  • Like
Reactions: FWoo45, BuildingConceptsllc, hkguns and 3 others
#34
They machined the action, I assume to match up with the magazine, after the receiver was finished initially. I'd assuming that's the complaint? Perhaps they know the finish would just wear off there anyway, and this way it's a cleaner look.
 
Last edited:
  • Like
Reactions: carbonbased
#35
cas6969 said:
They machined the action, I assume to match up with the magazine, after the recover was finished initially. I'd assuming that's the complaint? Perhaps they know the finish would just wear off there anyway, and this way it's a cleaner look.
Click to expand...
Yeah, and we’d need to see other b14 actions to even begin to know if what you have is a fluke.

Their Premier line smokes the B14 btw. But in that line it seems like Bergara is retreating down to only a few models, and I read that they discontinued their rebarreling program. That line does has interchangeable boltheads.
 
  • Like
Reactions: lash
#36
Frustrating when you get NIB firearm with a blemish.
But it appears that is all this is.

I don't know if you have aluminum or steel but there are touch up kits for iether.

After badmouthing the manufacturer your ass may be hanging in the breeze.

I have a mouth and temper and blow up if I think I'm getting a raw deal so since you are supposed to be mature in your actions by the time your my age (66) I came up with a plan.

I write a draft and have my wife moderate it and then I make sure it's not wishy washy.

She gets handed the phone often when speaking to support for example, it's better for everyone.

LOL

Now back to regular scheduled huricane watching and MF Milton.
 
  • Like
  • Haha
Reactions: Darryle, stevieb92, CaptNkllm and 3 others
#37
powdahound76 said:
If Lash aint stocked enough for a little storm like yall got coming, he might be as goofy as the OP!
🤣🤣🤣🤣
Click to expand...
I think that I’ll be okay in that department, though I am anticipating getting that bottle of Buffalo Trace Mike picked up for me. That’s assuming he doesn’t run out himself and crack the seal on it first. 😂🤣
 
  • Like
  • Haha
Reactions: Snuby642, powdahound76 and Dead Eye Dick
#38
Chubbyduck said:
I bought a Bergara b14HMR 6.5 cm ,well it has a defective mag well and Bergara says it normal trying to say there 10 year gunsmith says its a relief cut there fuckin idiots the fuckin finish is missing its rough aluminum what kind of assholes do they employ at BergaraView attachment 8519855
Click to expand...


You should have put this in the pit if that's your delivery.

Your just bloviating, you don't want to hear anything but yourself.

So pit it should be. This is tech.

Since this is tech. That could be any number of reasons..
It's aluminum. Who cares? It's a Bergara not a 1500 dollar action. They probably bulk coat them and then do some final assembly and fitment/check.
Hit it with a marker. If you actually use it, there's gonna be scratches and finish wear that will blend with that.
 
  • Like
Reactions: lash
#41
lash said:
I think that I’ll be okay in that department, though I am anticipating getting that bottle of Buffalo Trace Mike picked up for me. That’s assuming he doesn’t run out himself and crack the seal on it first. 😂🤣
Click to expand...
Well, he got a bottle for me too…. Do you think he will even notice the storm? 😆🤣
 
  • Haha
Reactions: lash
#44
Chubbyduck said:
I bought a Bergara b14HMR 6.5 cm ,well it has a defective mag well and Bergara says it normal trying to say there 10 year gunsmith says its a relief cut there fuckin idiots the fuckin finish is missing its rough aluminum what kind of assholes do they employ at BergaraView attachment 8519855
Click to expand...

Looks like a factory rifle, doesn't affect anything , stick a mag in it and you'll never see it. :)
 
  • Like
Reactions: lash
#45
My mother bought me an Ithaca 49 partially to try and get me out of the dumps after the sudden loss of my father. I’ve only had it since 1964. The finish is kind a spotty on the receiver. I complained to Ithaca and they say it’s normal wear. I say it’s defective and I wan them to goto Ithaca New York, dig up the old machining, open up the production line and make me a new one.

Should I sue or just go to my room and pout?

(Actaully shot the little gun the other day and after all these r years it can still put a .22lr 40 grain bullet on target out to 75 yards. Sweet little martini action, still extracts and ejects just like it’s supposed too. Damn fine little rifle. Every young man, south of the Mason Dixon and is a country boy should have one.). Yes it really is 60 years old. Yes the finish is spotty but heck, it shoots and that is what it’s supposed to do.

IMG_1509.jpeg
 
  • Like
  • Love
Reactions: Camelfilter, Ronws, Fixr and 7 others
#46
powdahound76 said:
No thanks on Disney.

Once was enough, one time too many……

The things we do for love…… 🙄


Plus, me n some squirrely dude got elk tags to try n fill startin Saturday…..
Click to expand...

Color me jealous on the wapiti tags.

And yeah, rat world can kiss my ass. Haven't been since my girls were very little.
 
  • Like
Reactions: powdahound76 and lash
#47
lash said:
I think that I’ll be okay in that department, though I am anticipating getting that bottle of Buffalo Trace Mike picked up for me. That’s assuming he doesn’t run out himself and crack the seal on it first. 😂🤣
Click to expand...

I'm gonna wait until you and @Schütze are together and toss it in the middle. You guys can rassle fer it. 😄
 
  • Haha
Reactions: Darryle, powdahound76, lash and 1 other person
You must log in or register to reply here.

Similar threads

D
New member here , looking for advice on building custom hunting rifle
Replies
11
Views
748
Dennis5374
D
H
Rough bolt on new Bergara HMR Pro
Replies
19
Views
1K
mikehill85
M
R
Bergara sucks ass, buyer beware.
Replies
480
Views
18K
tacoman69
T
Topstrap
Results Topstraps October Timed Rimfire Challenge
Replies
0
Views
55
Topstrap
Topstrap
Topstrap
Results September 2024 Topstraps Rimfire Challenge
Replies
0
Views
133
Topstrap
Topstrap
Top Bottom
Back
Home
Forums
Merch
Alerts