Ladies and gentlemen of the non-R700 Jury, I’d ask that you please remember back to post # 21,819 where a sticker, that’s clear as Burt’s R700 in an AICS, is believed to be “glare” by this Jeep-owning lint licker! ::dramatic turn and point as jury gasps::
I expect better from you in 2025 sir…
Now as a pic tax, here’s two AXSR bolts 69’ing on a bed of the Lord’s caliber.
Undecided, my buddy loaned me the ATACR to replace the Steiner. Thinking I’ll switch to a ATACR 7-35 or ZCO.
Peanut gallery chiming in here:
That 735 with the MilXT and the 527 with the MPCT2X are both tits.
…and side by side I couldn’t tell the difference on the mountainside down here.
Looks like they'll make a cold brake for whatever can you want. Do you know if you can specify pure recoil reduction or muzzle rise compensation or other custom features?Yea man I'm excited to test it on a 300nm imp in a few weeks. The normal short action chamberings its kinda the best of both worlds. Will be interesting to see if it holds that balance with chamberings with 80+ grains of powder.
I think he's got several sizes lined up. If you have a removable front end cap you are in business. No idea on those questions be worth hitting him up though
I run the same on my AI’s
Except I have the mpct 3 reticle with the vag
It makes me super horny
Maybe he could make a straight end cap for the TBAC RR series
those seem a little short to be 30-06
This is pretty cool
www.snipershide.com
Accessories - AI AXMC/AXSA Forend handguard with Atlas bipod
This is a custom-made 16" AXMC/SA forend tube with two folded Atlas 9-13" bipod legs. Super stable; lowered gravity center felt like a TRG set-up. It can be rotated and lockable. The last picture shows the look on my AXSA. $385 shipped.
www.snipershide.com
Get the 7-35x
When you want the best in Japanese glass get the the better warranty and image quality and go vortex gen3 razor.....
I hear you don't need an attorney either when you do lol
Little breezy today 1.4-1.5 mil at 550. 168 amax
Negative.
Might try for one of the January mkm matches if I can regain my shooting skills lol
.
You're right....I think 2025 is off to a good start personally.... Full send or gtfo
How do you like the pmii 5-25 with dtii+ and msr2? I'm looking at that vs used zco 527 10 mil turrets and mpct1x eventually.
I used to hand load 168 AMAX. Had a box I couldn’t get the seating depth consistent on. Turned out the bullets base to ogive varied .017” in a single box of 100. Looked like they came of two machines. The box was replaced but the box of smk I tested at the same time had a variation of .003”. Haven’t shot a 168 Amax since
I'll have to try it. The stats look good, but how is the consistency measured on a chronograph?
Federal T308T and LE308TTMK2 are king shit of .308 turd mountain, no? 0.48 and 0.452 BC respectively for those playing the home game.
Multiple boxes of T308T, this one is the worst I have. The best from the same lot is tighter with under 40fps ES and 10.1fps SD. Too poor for LE308TTMK2 though.
Multiple boxes of T308T, this one is the worst I have. The best from the same lot is tighter with under 40fps ES and 10.1fps SD. Too poor for LE308TTMK2 though.
I'll have to try it. The stats look good but how is the consistency measured on a chronograph?
I plan to check out the T308T using my new XERO. The other one is designed for barrier penetration. It can penetrate windows and not alter its trajectory. It is not what I would use for demonstrating precision.
I will also test some Berger and a few others
LE308TTMK2 is not what I’d use for precision shooting, but great for two legged critters behind glass or otherwise.
Federal T308T is also next to try on my list, for my AT308s with LW 1:12 barrels. Its the most stable round that has the greatest BC. Most Hornady rounds just won't fully stabilize with a 1:12 twist and their BC/performance is being neutered from the lack of gyroscopic spin. This gives me more confidence in turning to T308T.
I've shot at least a case through my AT's original LW 12 twist barrel. It is impressive. It works equally well in 10 twist barrels on my AT, AXMC, and TacOps.
I just looked at my inventory. I forgot I have 300 rounds of Black Hills Gold with the 168 A-MAX bullet. I will try it out next time.
Sierra also makes a Match King Variant with a Green acetate tip called the TMK. Lots of F-Class shooters use it. It has a G1 BC of .535 which is much better than the standard SMK. Not sure if the T308T uses the same bullet.
