Accuracy International Picture Thread

[clubmanager]

Just bought an inbound AXSA in 6cr.....and these mags but now not sure they are compatible? Please advise.....

Accessories - Accuracy International AICS Magazines

Have four short, 5 round magazines and three tall, 10 round magazines. Each has a 2 round Seekins Extension. Have the base plates too if you want to take those off. $155 shipped for two (whatever combo you want) $145 $75 for each additional magazine. $70

www.snipershide.com

 

[hafejd30]

Just bought an inbound AXSA in 6cr.....and these mags but now not sure they are compatible? Please advise.....

Accessories - Accuracy International AICS Magazines

Have four short, 5 round magazines and three tall, 10 round magazines. Each has a 2 round Seekins Extension. Have the base plates too if you want to take those off. $155 shipped for two (whatever combo you want) $145 $75 for each additional magazine. $70

www.snipershide.com

Accuracy International AT-X/AX Magazines

Accuracy International Rifle Magazines for sale for the AT-X and AX rifles. A.I. Magazines, Doublestack, .308, in multiple colors, and more from Mile High Shooting.

www.milehighshooting.com

 

[clubmanager]

Thanks. I'll just buy them online at the stores. No sense rolling the dice anyway!

 

[xxflyingturtlexx]

I'll gladly take your AX Buttstock off your hands if you do.


This was definitely the case, even with my MIL credentials on file at MHS and my wanting an AT-LE. Or even an AXSA that, for whatever reason, the model being a MIL/LEO exclusive only through them.

Promise i will hit you up first if i go through with this and decide to sell it!!!

 

[xxflyingturtlexx]

These two weigh a little over 2 pounds.

View attachment 8571966

View attachment 8571967

Bro reached out from 1976

 

[xxflyingturtlexx]

Man looks like AT-LE has some following. I might be interested in a straight up trade with a long action

 

[rbutcher]

It’s for sure great to shoot and get behind, but the non thumbhole is a serious knock against it

 

[carbonbased]

Just bought an inbound AXSA in 6cr.....and these mags but now not sure they are compatible? Please advise.....

Accessories - Accuracy International AICS Magazines

Have four short, 5 round magazines and three tall, 10 round magazines. Each has a 2 round Seekins Extension. Have the base plates too if you want to take those off. $155 shipped for two (whatever combo you want) $145 $75 for each additional magazine. $70

www.snipershide.com

If memory serves, regular AW mags work fine in an AX. The special AX mags pop in a little more securely. They have a little catch bumped out on the front, making them unusable in an AT unless you cut and pound the catch flush.

Source: me. I used to own both.

You could always check this thread too:

AW/AE/AICS mag diffrences

This should be the last post about the diffrences between AI mags. 1st is a full view of .308 and .338 rifles. Take note at the diffrence in thickness in the mag well area: Close up of the .308's: Close up of the .338's: In each of the following mags there are 3 rounds loaded. These...

www.snipershide.com

 

[carbonbased]

Bro reached out from 1976

IKR? I remember those things from my youth.

But given my experience with the digital variety, I wish I had one of those older mechanical scales.

 

[Nik H]

So I have tried a lot of thumb rest contraptions for my AXMC. The ones I have tried all have compromises. Some interfere with the folding stock locking.

I ran into this one from MBE Ballistics. It is billet machined and perfectly blends into the skins and chassis. It is ambidextrous. It has a curved rest that is comfortable and is adjustable front to rear.

Here it is on my MC

It is really amazing. It was about $95 total, including shipping from London that cost $35.

 

[Criver600]

So I have tried a lot of thumb rest contraptions for my AXMC. The ones I have tried all have compromises. Some interfere with the folding stock locking.

I ran into this one from MBE Ballistics. It is billet machined and perfectly blends into the skins and chassis. It is ambidextrous. It has a curved rest that is comfortable and is adjustable front to rear.

Here it is on my MC

View attachment 8574732

It is really amazing. It was about $95 total, including shipping from London that cost $35.

Mike makes good stuff, I'm running MBE bag riders & sleds on all three of my AT-X's

 

[DDGKunia]

So I have tried a lot of thumb rest contraptions for my AXMC. The ones I have tried all have compromises. Some interfere with the folding stock locking.

I ran into this one from MBE Ballistics. It is billet machined and perfectly blends into the skins and chassis. It is ambidextrous. It has a curved rest that is comfortable and is adjustable front to rear.

Here it is on my MC

View attachment 8574732

It is really amazing. It was about $95 total, including shipping from London that cost $35.

Can someone get him to make one for axsr? It blows my mind no one has came up with a good one yet.

 

[Nik H]

Can someone get him to make one for axsr? It blows my mind no one has came up with a good one yet.

Is the AXSR different than the MC with respect to the folding stock and location of the mounting points?

 

[DDGKunia]

Is the AXSR different than the MC with respect to the folding stock and location of the mounting points?

Yes. Different lower, stock etc. Completely different.
Only thing shared is barrels and magazines to my knowledge.

 

[xxflyingturtlexx]

View attachment 8572661

i have both, disagree

 

[Tex68w]

i have both, disagree

Ehh, I don't see either as better than the other, they just have different strengths and weaknesses. I have both and if I had to keep just one it'd likely be the Razor but I am glad that I don't have to make that decision.

 

[TheOE800]

Is the AXSR different than the MC with respect to the folding stock and location of the mounting points?

There are no mounting points. Someone around here drilled and tapped theirs for XLR’s thumb rest.

 

[Huskydriver]

Is the AXSR different than the MC with respect to the folding stock and location of the mounting points?

Completely

 

[HD1911]

 

[Nik H]

There are no mounting points. Someone around here drilled and tapped theirs for XLR’s thumb rest.

Fuck that

 

[Tritiumdials]

Fuck that

Relax, it's just a gun.

 

[TheOE800]

Fuck that

Yeah I’m a bought not built kinda gal.

 

[Nik H]

Relax, it's just a gun.View attachment 8575259

Totally relaxed

 

[jbuck88]

Ehh, I don't see either as better than the other, they just have different strengths and weaknesses. I have both and if I had to keep just one it'd likely be the Razor but I am glad that I don't have to make that decision.

The ATACR is easier for me to get behind. Have the G3 on the AT-X and ATACR on the AXSR.

 

[Tex68w]

The ATACR is easier for me to get behind. Have the G3 on the AT-X and ATACR on the AXSR.

I am only referring to the ATACR 1-8x vs Razor 1-10x. But I will agree with you, the ATACR is a touch easier to get behind.

 

[thrashergrant]

Posted this over on the ATXC thread but these Green Meanies have relevance here too.

Really cool to shoot these back to back. The AW is an '07 in .308 and the ATXC is a '24 in 6.5cm...at least 17 years of technological advancement between these two examples.

 

[stanley_white]

I discovered that the Limbsaver Recoil Pad Grind To Fit Black Small (1″ Thick/LOP) 10541, if installed upside down, fits on my AI AT, and if left unground offers a softer and wider recoil pad than factory.

See pics below.

-Stan

 

[SpeedDrop]

Dialing it in with the 6.5 CM barrel before switching to 300 PRC.

 

[rbutcher]

Dialing it in with the 6.5 CM barrel before switching to 300 PRC.

View attachment 8576314

What RMR ring cap on the ultramount?

 

[Huskydriver]

I discovered that the Limbsaver Recoil Pad Grind To Fit Black Small (1″ Thick/LOP) 10541, if installed upside down, fits on my AI AT, and if left unground offers a softer and wider recoil pad than factory.

See pics below.

-Stan


View attachment 8575766


View attachment 8575767

View attachment 8575768

That 6gt recoil be hard huh?

 

[stanley_white]

That 6gt recoil be hard huh?

Less about recoil with my 308 and more about increasing the surface area of the recoil pad permits a better rifle to shoulder connection which makes everything seem more steady, especially in the prone.

-Stan

 

[diggler1833]

Less about recoil with my 308 and more about increasing the surface area of the recoil pad permits a better rifle to shoulder connection which makes everything seem more steady, especially in the prone.

-Stan

See...all you have to do is turn your recoil pad upside-down. That's what the pros (with little deltoids) do man...

Shots fired...

 

[stanley_white]

See...all you have to do is turn your recoil pad upside-down. That's what the pros (with little deltoids) do man...

Shots fired...

I turned my new recoil pad upside down.



-Stan

 

[diggler1833]

I turned my new recoil pad upside down.



-Stan

Well just know Sir, that when the site figures out how to 'un-gay' itself and its picture posting issue...that I have a meme for you...

 

[Tex68w]

Gay or not it does work better.

 

[WillHugh]

Anyone shooting 6 Dasher with the new Gray Ops magazines? I'm having a terrible time getting rounds to feed in my AT-X. Have tried the mag catch at a few different heights. Seems like the brass shoulder is ramming into the receiver locking lugs.

 

[hafejd30]

Anyone shooting 6 Dasher with the new Gray Ops magazines? I'm having a terrible time getting rounds to feed in my AT-X. Have tried the mag catch at a few different heights. Seems like the brass shoulder is ramming into the receiver locking lugs.

Have you tried the updated mags? They changed the follower to address some issues with 6mm rounds

 

[Vivacious Stallion]

@WillHugh do you have a picture of how the case is hanging up? I'm running the greyops 6gt mag in my ATX chassis. The issues I had were related to the bullet tip catching on the feedram area of the magwell. I did have to mess with the catch position a bit.

 

[WillHugh]

@WillHugh do you have a picture of how the case is hanging up? I'm running the greyops 6gt mag in my ATX chassis. The issues I had were related to the bullet tip catching on the feedram area of the magwell. I did have to mess with the catch position a bit.

Having trouble posting pictures right now. I think that may be my issue though. The rounds are coming out of the magazine, but not making it very far. What position did you find worked best for you?

 

[Hennig]

i have both, disagree

That’s ok, you can.

I don’t have any ATACRs left in the safe at this point *shrug*

 

[diggler1833]

Have you tried the updated mags? They changed the follower to address some issues with 6mm rounds

I have, and unfortunately I still get stovepipes (nose down) with my 6GT in my AT-X.

The only work-around that I've found at this point is to load the rounds forward...even with the back of the feed lips. Feeds great then, but I doubt that would work well if I were running around in a PRS match and slamming my rifle off of stuff (getting rounds to shift in the magazine).

 

[Roadrace33]

Bit heavy for coyote hunting but definitely do-able.

 

[Vivacious Stallion]

Having trouble posting pictures right now. I think that may be my issue though. The rounds are coming out of the magazine, but not making it very far. What position did you find worked best for you?

My mag needs to be pretty tight against the bottom of the action when locked in. No vertical slop like I can get away with on my other mags.

 

[Chasing3]

AXMC, 308 barrel cut to 16.5 along with handguard. Edit, pictures still won’t attach.

 

[jbuck88]

Bit heavy for coyote hunting but definitely do-able.

Compared to our tiny coyotes that looks more like the size of a wolf

 

[xxflyingturtlexx]

Would anyone join if there was an AI owners discord channel? Gauging interest.

 

[Huskydriver]

Would anyone join if there was an AI owners discord channel? Gauging interest.

Oh your not currently on it? That's awkward

 

[Tex68w]

There's a group on reddit and it's super slow.

 

[TheBigCountry]

Oh your not currently on it? That's awkward

wtf is a discord

 

[HKSniper11B]

I'm going to put this out there, decided to jump the gun as I was talking to @xxflyingturtlexx about it after SH crashed. And, real-time conversation would be nice. Click the link below to get started:

Click Here: Accuracy International Fan Club Discord Server

Discord is similar to the old IRC days (Internet Relay Chat). Think of it as a server dedicated to a specific topic, that has channels and categories. In this case, the server would be about Accuracy International rifles, and we can do all the same things as we do here on SH in this AI channel, but more. It will take the community to grow it.

It requires downloading the "Discord" application (remember AOL Instant Messenger? Sort of like that, but more). The link above gets you started. And if we can get this big enough, it'd be worth asking for blessings & support from Accuracy International.