Yeah, its not a must to put it in front of my 5-27 but I do have a zco 4-20 on a tikka 223 in a whiskey chassis that I was hopeful for.
-
Having trouble using the site?
Contact support
Night Vision The Official: Steiner C35 Thermal Clip-on Review and User Thread!
- Thread starter TheHorta
- Start date
If you have an sunshade on the ZCO, you may have enough standoff from the lens to make it work. My C35 Gen 1 was unusable in front of my Razor LHT 4.5-22... I could use the menu and couldn't see the settings indicators on the edges of the thermal display. The ability to read and use the menu is going to be the deal breaker there.
Yes sir, that was my understanding of the agm as well. The zco sits a fair distance from the nv bridge so it might be plausible. When a c35 pops up in the px i will find out.
I am really happy with mine.. especially for being just over $2k. I much prefer it to my Super Hogster. The Hogster basically lives on a .22LR bolt action now, with occasional 300blk duty. My pig and coyote go tos involve the C35. It's waaaaaay more comfortable to look through for a long period.
It works best from 2x to 8x, I'd say the absolute max is 10x, which is about the same as the C35 gen 1
Are you referring to the TA651 here? I was hoping it’d take more then 10x comfortably
Yes, I can get some footage through a scope this weekend.
Running a clip on with a Tikka in the KRG chassis is going to be difficult due to KRG not adjusting the NV rail height (designed around the R700 acrion) to the height of the Tikka action/rails. I went down that rabbit hole and had to run super high rings.
I gave up and just threw one Tikka in a Tac A1 chassis and the other in a McMillan (have a Badger nv rail i need to have installed)
Last edited:
I couldn't get the scopecam to work, so all I could get is some pics of the TA651 in action. It was also pouring rain 1hr before these were taken, so its about the worst possible conditions with high humidity and wet ground and targets. But you can at least see how a optic performs in the clip-on. These pics do not accurately represent the clarity of this unit.
This is a 1200yd range with steel targets at multiple berms, with the reticle pointed at the 760yd berm. With the relatively flat temps on the terrain, its not popping as much as it normally would, when dry.
I said before that the max zoom id recommend is at 8x, maybe 10x. To clarify, that's is my recommendation to be able to still positively identify animals and targets. 8x is about the point where you START to lose fidelity. You can definitely shoot stuff and see at 15x, its just obviously less clear and not ideal for PID.
This is a 1200yd range with steel targets at multiple berms, with the reticle pointed at the 760yd berm. With the relatively flat temps on the terrain, its not popping as much as it normally would, when dry.
I said before that the max zoom id recommend is at 8x, maybe 10x. To clarify, that's is my recommendation to be able to still positively identify animals and targets. 8x is about the point where you START to lose fidelity. You can definitely shoot stuff and see at 15x, its just obviously less clear and not ideal for PID.
Last edited:
It’s a fun gun for sure.
I did a 9” barrel so I could dump velocity off of the cheap 40 grain ammo and make them subsonic.
I did the 1-6x just for use with the thermal. Getting 2 moa groups at 100 with shitty 40 grain lead nose with the box velocity listed at 1130 fps, they are staying subsonic.
I did a 9” barrel so I could dump velocity off of the cheap 40 grain ammo and make them subsonic.
I did the 1-6x just for use with the thermal. Getting 2 moa groups at 100 with shitty 40 grain lead nose with the box velocity listed at 1130 fps, they are staying subsonic.
I dropped my C35 like 3-4 feet onto my deck trying to pull it off one handed last night.
It landed in its side pretty hard. I was worried it was going to have issues with the zero.
Put it on and checked it tonight and it was good to go!
It landed in its side pretty hard. I was worried it was going to have issues with the zero.
Put it on and checked it tonight and it was good to go!
lol I think you ur missing a kitchen sink… might help the balance haha
Similar threads
