• Win a RIX Storm S3 Thermal Imaging Scope!

    To enter, all you need to do is add an image of yourself at the range below!

    Join the contest

The AI Arctic Warfare Picture Thread


giphy.gif
 
Beautiful gun but hurts to see that

Not only did the lords chassis system get removed but it went from an alpha top $ AW setup to pre AX that sit in the PX here for $3500

Function wise it’s an upgrade but it still hurts on the inside

i would disagree with the last part.

that gun isn't original but can easily taken back to it. ill give $4k for it right this minute as it sits. probably even go $5k
 
i would disagree with the last part.

that gun isn't original but can easily taken back to it. ill give $4k for it right this minute as it sits. probably even go $5k
Fair point. What’s it cost or availability of a AW chassis? If it’s not sitting in the closet that is
 
Fair point. What’s it cost or availability of a AW chassis? If it’s not sitting in the closet that is
There are a few debonded AW chassis floating around. Never seen a debonded pre-14 AX chassis but do know of a guy who got a new AX chassis fitted onto his AW at the factory. I have/had 2 AW chassis and seen plenty of other debonded ones - about $1000-1500 will get you one in the UK.
 
  • Like
Reactions: brianf
I hope it calms everyone's nerves to know that this is not a butchered AW. It's a prototype AX, built on an AW receiver.
Ah very nice!

Upon closer inspection, the forend is not the same as the production ones. The keyslots are the other way for a start.

Otherwise mechanically the same as a production pre-2014 AX.

I'm surprised it doesn't have any import marks. Is this normal for prototype/demo AIs in the States?
 
  • Like
Reactions: Gunny89
@BuLLet

We know you have a few laying around 😂😂
Yes, I do have a few... :)

Been swamped with work, just finished with the books for last year! Should have a little more free time, I'll break them out of the safe and take some new pics for posting.. :)

Also, I'll get that paper done and we'll do some shooting!
 
If that’s a SIMRAD KN203, it’s over 4lbs! Oooooffff says the scope tube. On most mounts except the ARC Mbrace, anyway.