Search results

Search the forum Search Articles
  1. T

    AR accuracy and barrel length

    Re: AR accuracy and barrel length Barrel length has little to do with accuracy, that is absolutely correct, esp. considering the available loads. The AR platform is evolving into an extremely accurate gas gun, able to compete with bolts (we build for F-Class). Look at the various 6mm...
  2. T

    Piston or Stoner?

    Re: Piston or Stoner? Some piston systems have worked to improve inherent loss of accuracy, and succeeded. That said, a piston gas gun will not be as accurate as direct impingement.
  3. T

    Suppressors H&K P30L - Thoughts?

    Re: H&K P30L - Thoughts? The LEM trigger is somewhat of an improvement over the standard issue. I've had a few P-series in the shop, and the standard trigger has one of the longer take-up's I've seen on modern production pistol. As with any trigger, it has more to do with how well the...
  4. T

    Gunsmithing barrel scopes!

    Re: barrel scopes! Count me in, it'd be nice to have a tool like that in the shop.
  5. T

    Shilen 204 Ruger AR15 Drop in barrel question.

    Re: Shilen 204 Ruger AR15 Drop in barrel question. Shoot it out.
  6. T

    Barrel Cleaning

    Re: Barrel Cleaning It depends, on the type of shooting you do, barrel material, climate you live in, etc. I use a 6mm AR in F-class, and clean (fouling check) after 20rds.
  7. T

    My First AR Build

    Re: My First AR Build The barrel is the heart and soul, take your time and research the various options available for this platform. If accuracy is priority (as it should be), then go with a heavy-profile stainless in either the Remington or Wylde chambers, with either an 8 or 9.
  8. T

    Gunsmithing Need to have a Sako extractor installed on 700

    Re: Need to have a Sako extractor installed on 700 Call Kampfeld and talk to them. You want to make certain the angle is milled perfectly to fit this one. That said, I've never seen a Rem extractor go bad or lose it's strength. I do Sako's for $100 plus S/H, but am backed up about 7-8...
  9. T

    Gunsmithing Need to have a Sako extractor installed on 700

    Re: Need to have a Sako extractor installed on 700 +1 for Kampfeld Customs, Karl's work is very good.
  10. T

    Gunsmithing Building an accurate AR...

    Re: Building an accurate AR... Square it on a lathe for best results. The anodized buildup (plating thickness) varies over the surface, and is often uneven. Take care to not remove too much.
  11. T

    Gunsmithing Who Uses K-Phos with GunKote?

    Re: Who Uses K-Phos with GunKote? I always blast and zinc park before using KG or Lauer products.
  12. T

    Gunsmithing removing pillars

    Re: removing pillars They're going to be in there, regardless of composite used, but especially with Bisonite. You can always resort to drilling, so try freezing overnight and then tapping out first. They'll drill out easier if they are aluminum.
Top Bottom
Back
Home
Forums
Merch
Alerts