Search results

Search the forum Search Articles
  1. Rlbol

    SOLD: NEW Danner Tactical Boots Size 10.5D $150 shipped

    I wish those lowa’s were a bigger size. Great boot and great deal!
  2. Rlbol

    SOLD: Schmidt & Bender 3-27x56 - Tremor 2 Reticle - PRICE DROP

    Wow that was a great deal!
  3. Rlbol

    Gunsmithing SB heavy 10 vs 13

    I got to run both Sb today. After dealing with my Logan I have to say I am empressed by the quality of the south bends. They were both very nice and have every imaginable extra for each. How ever after seeing what you can get in a larger more modern lathe such as being able to thread metric...
  4. Rlbol

    Gunsmithing SB heavy 10 vs 13

    There seems to be a large amount of lathes in that price range. Is there a point or problem with going to large? I found what appears to be a nice pretty loaded nardini 1440 As well as monarch 61 And a CLAUSING METOSA C1340
  5. Rlbol

    Gunsmithing SB heavy 10 vs 13

    Both models have a d1-4 spindle The 10 has a 4.5, bed the 13 has a 6 ft bed. Both 3 phase I plan on most work being thru the head stock unless the barrel diameter excedes the bore diameter. Would like to change calibers on a ar50 so that may be a problem however it looks like either model...
  6. Rlbol

    Gunsmithing SB heavy 10 vs 13

    This may not be the best place to post this however I believe we have more honest and trust worthy members on here then any forum! So if you could get a like new heavy 10 with 4.5 bed hardened ways, D1-4 spindle with basically every attchment except milling attachment and tool post grinder...
  7. Rlbol

    SR-16 upper + Triple Tap (SOLD)

    Something falls thru let me know!
  8. Rlbol

    WTB AI chassis

    I am loooking for an AI chassis for rem700 I would like to find a short action and a long action. I am looking for the older model which was like the AE and AW. If you have an thumbhole, folding model let me know. I am looking for the model before the AT. FDE color is preferred!
  9. Rlbol

    SOLD pre 14 long action aiax MAKE AN OFFER!!

    What caliber magazine? What action did you have in it?
  10. Rlbol

    Compass lake barrel seeks upper $830

    If for some reason you would like to sell just the barrel or barrel and Bcg. Just let me know
  11. Rlbol

    Accessories SR-25 ECC upper with Geissele rail ($4350)

    Anything you might be interested in as trade?
  12. Rlbol

    Gunsmithing Lathe advise?

    I prefer to thread thru the headstock. I would like to be able to thread up 1.75” for AI AXMC barrels however I have been unable to find much in lathes that are still a reasonable size with such a large bore diameter. I don’t mind spending money on a good lathe. In my little research and...
  13. Rlbol

    Gunsmithing Lathe advise?

    Without getting to crazy on buying a new machine can the experts offer a little advise? I currently have a 11x36 Logan with 1ph 3/4 hp 110v motor. It has been a good lathe but low on power and with a flat leather belt I seem to really be limited by slipping. The machine will be used 40% for...
  14. Rlbol

    Gunsmithing What tools do you prefer for threading and chambering barrel?

    Thanks for the replies I was asking more on the part of tools verses dial indicators. I have lots of them. I have a bunch of barrels I would like to thread for brakes/ suppressors. My lathe is an 11” Logan. I am going to build a spider for the outboard side of the headstock. With the spider to...
  15. Rlbol

    Gunsmithing What tools do you prefer for threading and chambering barrel?

    Other then a lathe, what other are your preferred tools? I have been playing around with a lathe for a while now but would like to get more serious and build a few barrels. I plan on building an out board spider but I have read about zeroing out the barrel via the lands. If anyone is using...
  16. Rlbol

    The Fix from Q

    With everyone on here bitching about something or another, did I miss where someone one on here actually received one of the rifles and shoot it?? If so so how did it shoot? I like the concept but haven’t seen anything about accuracy and precision?
  17. Rlbol

    Gunsmithing Lathe advice!

    I was really hoping to do threading and chambering in the head stock as it just seems that it would be far more ridged verses centers? So so after looking more and more I was really hoping on finding a used America or older lathe. Everything I find has a far to small bore dia. Or is way more...
  18. Rlbol

    Gunsmithing Lathe advice!

    Thanks guys any advice on where to look for used ones? And any particular ones to look for?
  19. Rlbol

    Gunsmithing Lathe advice!

    I am looking at purchasing my first lathe. Looking to primarily thread and chamber barrels. smiths, let me know what you have and what you like and dislike about it. If you were in the market what would you buy? As as far as sizing goes I donot have access to 3 phase power so that is my only...
  20. Rlbol

    Are there any Sharps Shooters here?

    I can't contribute to much to your choices. However I can tell you me experience. Being an AI shooter with only very high tech modern rifles and optics and kit. I have always loved the qugily movie. I happen to see a pederaoli 45/70 listed in the for sale section on here. The price was right. So...
Top Bottom
Back
Home
Forums
Merch
Alerts