Search results

Search the forum Search Articles
  1. Shane C.

    email of the day!

    It was from Mary A., Crete Greece.
  2. Shane C.

    email of the day!

    "Please stop selling weapons and their parts to the community. Perhaps you could make it a part of your policy? Maybe if you worked solely with the government for the time being that would help? No answer is correct or easy, but if we didn't have guns at all that would be the best solution...
  3. Shane C.

    Suppressors 9/16x28 min barrel muzzle diameter?

    For a 9/16" (24 or 28). Face mount brake, you need .560"+. Shoulder mount, you need .660"+.
  4. Shane C.

    Suppressors Tbac ultra core upgrade

    You should have it back in two weeks or so.
  5. Shane C.

    Suppressors Tbac ultra core upgrade

    Re-cored cans are not re-marked in any way. The only way to tell is to look inside, the baffles will have notches. Pictures are fine.
  6. Shane C.

    Suppressors Question about Ultra 9 on .22lr

    Shoot your Ultra on it until you can get TD. The "dip", won't hurt the can. The can should be cleaned periodically anyway. CLR works pretty good for center fire crud, but sometimes a round of vinegar/peroxide helps break it up as well. The weight of the can will tell you when to clean it, as...
  7. Shane C.

    Suppressors TBAC 338BA Mounting on MRAD Timing Issue?

    You need to make the washer thinner. Carefully remove layers until the brake comes around and times. https://thunderbeastarms.com/videos?id=cDC6MB-VcD0
  8. Shane C.

    Suppressors Suppressor indexing on threads (vs muzzle or shoulder)

    You don't need to replace the barrel, just have it fixed. Putting a thread relief in is pretty easily done by a good smith. If the can is not seating on the shoulder you will have an alignment issue leading to a baffle strike.
  9. Shane C.

    Suppressors TBAC 30P-1 Bushing Help

    That still doesn't solve the problem. The "bushing", needs to have a shoulder to go against to align it. To make it work, the bushing needs to be permanently installed (threaded on then soldered is best). Then, the barrel can be chucked up, dialed in and threads cut on the outside of the...
  10. Shane C.

    Gunsmithing Haas TL-1 Opinions

    We have been using TL-2s, for 10 years now and have been very happy with them. The newest is just a couple months old (came with hand wheels, don't use them much). The larger spindle through hole and the extra center to center distance on the 2's are really helpful if you can afford the difference.
  11. Shane C.

    Suppressors ATF eForms update

    CB's should start shipping to dealers that ordered soon, waiting on ATF at this point.
  12. Shane C.

    Suppressors ATF eForms update

    Here is a cut and paste version of an e-mail that came in today (the table is missing but the info is in the text). Good afternoon: We are pleased to announce the following updates to the eForms system: 1. Performance enhancements – We were able to address some of the technical issues...
  13. Shane C.

    Suppressors Length of suppressor vs. recoil reduction: ATTN: Thunderbeast

    So here are some numbers for you; Recoil comparison using sled, M80, .308, ball ammo. Travel is in inches. Bare Muzzle: avg: 32.9" STDEV: 0.83 30P-1: avg 18" stdev: 0 (45.3% reduction) CB7: avg: 18.5" stdev: 0.36 (43.9 % red) CB5: avg: 21.45" stdev 0.19 (34.8% red) 338BA/CB: avg: 17.7" stdev...
  14. Shane C.

    Suppressors 8.5" Barrel 300 Blackout Muzzle Pressures

    Quickload says 13,500 psi if you can actually get that speed out of that short of a barrel. fyi A 14.5" AR is going to be a little over 14,000 psi at the muzzle, a 20" AR is just over 8,000 psi.
  15. Shane C.

    Suppressors Thunder Beast 30-BAS

    Are you using a the short cover for it or are you using a regular length cover?
  16. Shane C.

    Suppressors Received my Thunderbeast 22L -- very high praise following

    Yes.
  17. Shane C.

    Suppressors 30p -1 converted to 30ba?

    The internals of the thread end and the baffle spacing won't allow the brake to fit.
  18. Shane C.

    Suppressors 30p -1 converted to 30ba?

    Can't be done.
  19. Shane C.

    PHX or ABQ or in between

    Awesome, PM sent, thanks!
  20. Shane C.

    PHX or ABQ or in between

    PM sent. Thanks!
Top Bottom
Back
Home
Forums
Merch
Alerts