Search results

Search the forum Search Articles
  1. E

    Rem 700 action?

    Re: Rem 700 action? Just what I was looking for. Thanks
  2. E

    Rem 700 action?

    Re: Rem 700 action? Thanks for the info. Is there a way to tell which years are desirable by the serial number?
  3. E

    Rem 700 action?

    Curious if there is a period that the 700 actions were made that are more desirable than the other years? Wondering if I need to stay away from any years while aquiring one for a build.
  4. E

    Favorite loads for 22-250?

    Re: Favorite loads for 22-250? Here's another vote for H380
  5. E

    clean the copper in barrels?

    Re: clean the copper in barrels?
  6. E

    Issues after bedding

    Re: Issues after bedding The current standard is the threads need to engage at a min depth equal to the diameter of the fastner.
  7. E

    Long range hunting calibers

    Re: Long range hunting calibers My suggestion is the 30-06. Cheaper to shoot and easier on the shoulder than the 300 Win mag. With the choice of bullet weights available, it's all you will need.
  8. E

    Hornady brass

    Curious what the opinions are on Hornady brass. Have you had any problems using it and does it seem to be quality stuff?
  9. E

    where did all the .223 55gr bullets go?

    Re: where did all the .223 55gr bullets go? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: attherange</div><div class="ubbcode-body">I've loaded and shot a lot of that WC844 when it was $36 for 8lbs, those were the days. Hitech ammo isda bunch of good guys too...
  10. E

    Gunsmithing Live round stuck in chamber ~ AR 10

    Re: Live round stuck in chamber ~ AR 10 Sounds like you've been given several possibilities. Listing to them all, it sounds like the easiest would be to pull a bullet from a loaded round and then chambered the empty case. That seems like the quickest way to tell where to focus your efforts.
  11. E

    auto loaders and lapua brass

    Re: auto loaders and lapua brass <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pshell</div><div class="ubbcode-body">I run Lapua in my gas gun not for the added "accuracy" but for the zero prep required compared to Winchester brass. It's the same reason I run...
  12. E

    help needed for 30-06 loads for long range

    Re: help needed for 30-06 loads for long range Take a look at this, http://riflemansjournal.blogspot.com/2012/05/cartridges-accuracy-secrets-of-30-06_10.htmlk
  13. E

    .223 load rl17

    Re: .223 load It sounds hot to me. I've been using 24.5 with 77 grn bullets. Start low and work you way up. Start below 24 grns
  14. E

    .223 using 75gr Amax...powder selection input

    Re: .223 using 75gr Amax...powder selection input Ive had very good luck with H4895 with the 75 Amax. Very accurate. The only bad thing with it is that the powder doesn't meter very well.
  15. E

    best place to buy brass

    Re: best place to buy brass What kind of brass? Every dealer has something they are cheaper on than the others. Ex, Natchez had new LC 223 brass for .11 each, while others were selling it for .20 each or higher. Tell us wht your looking for and we can tell who has the best deal.
  16. E

    M193 marked cases

    Re: M193 marked cases Thanks
  17. E

    M193 marked cases

    I have some 223 brass that is head stamped "M193 08". Any ideas on who made it?
  18. E

    LC Brass Case Failure 1st Firing

    Re: LC Brass Case Failure 1st Firing Can you show us a picture of the markings on the base?
  19. E

    223/5.56 Max load advice

    Re: 223/5.56 Max load advice Sometimes I think the powder companies are a little conservative with their data due to many reasons. One is that a load developed in cool weather will blow primers in hot weather. Use a chronograph and stop when you get the desired velocity. Are you shooting this...
  20. E

    Horizontal Stringing

    Re: Horizontal Stringing Have a known good shot, shoot the group for you. That would tell you if it's something you are doing.
Top Bottom
Back
Home
Forums
Merch
Alerts