Search results

Search the forum Search Articles
  1. 00bullitt

    Rifle Scopes Kudos to NIghtforce customer service

    PM Sent for more info
  2. 00bullitt

    Rifle Scopes What mount for the AIAX?

    Take a look at the Nightforce MagMount (A162) - it is 1.44" high and has 0moa of taper with 3 clamping jaws Nightforce 34mm Magmount
  3. 00bullitt

    Rifle Scopes ANOTHER Nightforce 2.5-10x42 question: HS mil turrets or no?

    The Mil adjustments are non-HS at 5 Mils per revolution. The MOA adjustments are HS at 20 minutes per revolution. We could not fit 10 Mils per revolution on the smaller diameter dials. 8 was max so we chose to stick with 5.
  4. 00bullitt

    Rifle Scopes NF ATACR Scope/Ring Combo Clearance Question

    Lower than 1" with that thick of a barrel contour will most likely be an issue. 1" should be fine.
  5. 00bullitt

    Turret Presses

    Looking to get a turret press. Curious as to which you guys would recommend. The RCBS and Redding T7 both look nice but there is also a $70 price difference. My RockChucker has been good to me so I was leaning toward the RCBS.
  6. 00bullitt

    Rifle Scopes Nightforce ATACR for 1,000 yard F class?

    If there are perceived issues other than dot size of the reticle in the Competition scope, it has not been communicated to Nightforce.
  7. 00bullitt

    Rifle Scopes not sure what height scope ring to buy for new night force

    If the AR10 has a continuous rail, you will need a minimum height of 1.375" to clear the 56mm objective. I prefer 1.5". Due to the straight line stock design of the AR platform, a lower mounting height is detrimental.
  8. 00bullitt

    Any new rear rest bags available

    Check out the Crosstac rear bag. It is compact enough to fit in a cargo pocket and the shape is perfect. It has a protected zipper in order to add or remove fill to your liking. Crosstac
  9. 00bullitt

    Rifle Scopes Does anyone make parallax knobs with yardage markings for NF scopes?

    Tim, If parallax could be eliminated with a constant, we would mark them. But atmospherics alter parallax correction greatly. A 20 degree swing in temperature could alter parallax correction by as much as 400 yards. We set parallax in our temp controlled factory at 70 degrees and 40% humidity...
  10. 00bullitt

    Rifle Scopes Nightforce Competition DDR

    The subtensions in your scope are not incorrect. It would never have passed QC if so. The QC label that it wears ensures that it met our stringent quality standards prior to leaving our factory in Idaho. How did you verify the predicted 3.3moa of drop?
  11. 00bullitt

    308 w 190's in a 23" barrel?

    My preferred load for a 308 with up to 1:11.25 twist is the 190 SMK over 48.5gr. of RL17 That is loaded in to FC dated Mil brass with a 10" drop tube as it fills up the case and the load is compressed. Winchester will allow a little more capacity. I load to 2.84" oal and use 210M primers. Out...
  12. 00bullitt

    Rifle Scopes ATACR vs S&B PMII 5-25

    What you were told is simply not true. We provide very accurate lead times to our dealers. We are building MOAR and MIL-R ATACR's everyday but there are different lead times for delivery based on reticle popularity - The MOAR being several weeks longer. In second focal plane scopes, the MOA...
  13. 00bullitt

    Rifle Scopes TReMoR 2 Reticle Manual/ Explanation

    This isn't the powerpoint, but the following link will take you to an instruction manual for the HDMR and starting on page 14, it gives basic instruction of the T2. http://www.horusvision.com/download/manual_horus_hdmr.pdf
  14. 00bullitt

    Rifle Scopes Nightforce 2.5-10x24 marked Recon Army-Spec

    Only the Compact MIL-SPEC 1-4 and 2.5-10's have NVD compatible illumination settings. The full size MIL-SPEC scopes do not. The new for 2013 Compact NXS's also have NVD compatible illumination settings.
  15. 00bullitt

    Rifle Scopes ATACR vs S&B PMII 5-25

    Rob.....alot has changed since then. Mostly the past 18-20 months. It may have fallen on deaf ears then, not now. We just ask that you be patient if possible. We cannot effect change overnight. We focus heavily on quality and perfecting designs takes time.
  16. 00bullitt

    Rifle Scopes ATACR vs S&B PMII 5-25

    All....we read these boards and use them to gather intel. Change is not effected overnight. But we are hearing what the end users want. Things are in the works. Good things. Phone calls and emails in regards will only bog us down and absorb resources.
  17. 00bullitt

    Rifle Scopes NXS Beast vs. S&B PM II

    Currently there are no BEASTS outside of NF; but very soon. I've got mine that I have been comparing against others, and its a beautiful scope. I've used mine side by side next to a 5-25 and 12-50 PMII as well as other brands. I am extremely curious to hear the feedback once they start...
  18. 00bullitt

    Rifle Scopes Nightforce 2.5-10x42mm FFP?!

    An exit pupil almost twice the size and side focus adjustment for parallax correction.
  19. 00bullitt

    Rifle Scopes ATACR vs S&B PMII 5-25

    The only holdup is that the ATACR is selling at an unpredicted rate. The MOAR being the more popular reticle choice. There are some dealers that order well in advance to keep a steady supply in inventory to lessen the burden of waiting to the customer. All NF scopes are built to order and there...
  20. 00bullitt

    Rifle Scopes Stripped NF Zero Stop?

    Please call Customer Service at (208) 476-9814 ext. 201
Top Bottom
Back
Home
Forums
Merch
Alerts