Search results

Search the forum Search Articles
  1. 00bullitt

    Rifle Scopes ATACR vs S&B PMII 5-25

    The MOAR in the ATACR 25x is .110" It is .140" in the NXS 15x and .125" in the NXS 22x and 32x(subtends properly at 22x) The MOAR in the 2.5-10x32 is .160"
  2. 00bullitt

    Rifle Scopes Nightforce UL 34 rings with Steiner 5-25 issue

    Nightforce Rings are held to very tight I.D. tolerances and inspected prior to being packaged. I'd be hesitant to believe it was an issue with the rings, but it is always a possibility. If you believe them to be an issue, please contact our Customer Service Team at (208)476-9814 ext. 201 to...
  3. 00bullitt

    Rifle Scopes NF ATACR: rings and base

    Three heights are available - .885", 1.00", 1.125" A220 - .885" for Remington Short Action (20moa) A103 - 1.00" for Remington Short Action (20moa) A106 - 1.125" for Remington Short Action (20moa)
  4. 00bullitt

    Rifle Scopes NF ATACR: rings and base

    The weight of a single .885" height Steel ring is 7.25 ounces and the weight of the same height UltraLight ring is 2.86 ounces. BTW - .885" is the height that you will need. UltraLight rings are every bit as strong as their Steel counterpart. The UltraLights are also non-corrosive due to the...
  5. 00bullitt

    Rifle Scopes nxs 2.5-10 illumination question

    They are two Night Vision compatible settings for using an NVD behind the ocular to view through the scope.
  6. 00bullitt

    Rifle Scopes NF ATACR: rings and base

    I was able to confirm yesterday while visiting Accurate Ordnance, that the 1.00" rings work on an ATACR mounted to a Stiller long action on their base, but their base also appears to be roughly .080" taller than a NF base, so there still could be a clearance issue using a Remington action and NF...
  7. 00bullitt

    Rifle Scopes Nightforce NXS to G7 cap conversion?

    The G7 turret cap is only for the ZeroStop model. If you had the ZeroStop adjustment on your scope, you could just replace the cap with the G7 Ballistic Cap. For Non-Zero Stop BDC caps, look at Kenton Industries. There is also someone making mylar laminated tape strips that are printed with...
  8. 00bullitt

    Rifle Scopes NF ATACR: rings and base

    For a long action, I am reluctant to recommend the 1.00" height rings. The shorter length of the ATACR puts the objective right at the front of the action where it tapers. Short actions are fine for the 1.00". I know the 1.125" height will clear. It is a gamble to try the 1.00" as i have not yet...
  9. 00bullitt

    Rifle Scopes Nightforce BEAST and ATACR Objective and Ocular Bell

    The outer diameter of the objective for the BEAST and ATACR are 65mm. The ocular housing diameter on the ATACR is 44mm and the BEAST is 46mm.
  10. 00bullitt

    Rifle Scopes NF ATACR: rings and base

    I'm most certain that with that thick of a contour, it will require the 1.125" height. #4 contour is about the thickest that the 1.00" rings will work with on a long action.
  11. 00bullitt

    Rifle Scopes NF ATACR: rings and base

    The base is the A135 which is the HS Precision Base that will work on the Remington LA or you can go with the A112 which is the Remington LA Base (20moa)base that has a larger recoil lug and have it drilled for the 8-40's since it comes drilled for 6-48's. Both solutions will work. The recoil...
  12. 00bullitt

    Rifle Scopes NF ATACR rings?

    The Nightforce UL 34mm - 1.00" height rings should work fine for both platforms on a short action. with the M24 contour barrel, it will begin to get close.
  13. 00bullitt

    Rifle Scopes NF ATACR: rings and base

    The EGW base is aluminum. 338 LM would be better suited with a steel base in my opinion. If you have 8-40 screws, go with the HS Precision Base that we make or go with a Badger - 20moa with the ATACR will povide you about 70-80 moa of elevation travel from your zero. Both bases have recoil lugs...
  14. 00bullitt

    Rifle Scopes nightforce competition scopes

    They begin shipping in a few weeks. There are a few folks that they were provided to for testing and feedback. Walt Berger has been in love with his and Darrell Buell of Team USA F-Class has enjoyed his and the team will be running them for their next upcoming big match in South Africa. Seveal...
  15. 00bullitt

    Rifle Scopes NF ATACR: rings and base

    You said you were going to use a 30moa NF base? The only Remington bases we make are 20moa and 40moa. We did however, produce some bases for the HS Precision rifles with differing taper, but they were also 8-40 screws, but they work on Remington actions. That is why I asked if you were using one...
  16. 00bullitt

    Rifle Scopes NF ATACR rings?

    When mounting the ATACR on a Short Action, the 1.00" height Nightforce 34mm UL Rings work well. If you go to put it on a long action, most likely you are going to need 1.125" height for proper clearance due to the scope being shorter than prior NF NXS scopes.
  17. 00bullitt

    Rifle Scopes NF ATACR: rings and base

    I personally don't think the 30moa base is necessary, but its not an issue. I'm assuming you are speaking of one of the HS Precision bases? As for rings, we are not making 34mm steel rings; only the UltraLights which are far superior to steel in my opinion. We do offer a 4 screw and a 6 screw...
  18. 00bullitt

    Rifle Scopes NF reticle choices

    Re: NF reticle choices <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BBK85</div><div class="ubbcode-body">Can any of the FFP reticles be had in a 5.5-22x56 NSX? And the 5-25x56 ATACR? </div></div> No, there are F1(FFP) optimized variants for F1's and then there...
  19. 00bullitt

    Rifle Scopes NF reticle choices

    Re: NF reticle choices <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ultraman550</div><div class="ubbcode-body">I'm glad you're here 00bullitt because I wanted to ask what is probably a silly question. The ATACR is shorter but in the pictures I have seen it...
  20. 00bullitt

    Rifle Scopes NF reticle choices

    Re: NF reticle choices You will be limited to 65 MOA of internal travel with the 8-32 and the reticle still subtends at 22x. The 22x provides 100 MOA of internal travel in a 30mm tube The ATACR provides 120 MOA of internal travel in a 34mm tube and uses HD/ED glass and it is 1" shorter than...
Top Bottom
Back
Home
Forums
Merch
Alerts