Search results

Search the forum Search Articles
  1. C

    Gunsmithing Chamber Chamfer for improved feeding with minimal body taper cartridges

    So with that being said is it variable to increase size of chamfer on a barrel that has already been chambered? OR will this leave too much of the case unsupported? The difference in feeding is hard to notice when running the bolt normally, it is really just when you go really slow.
  2. C

    Gunsmithing Chamber Chamfer for improved feeding with minimal body taper cartridges

    Guys, I was wondering if anyone had any experience with changing the size of chamfer on a chamber to improve feeding of cartridges with minimal body taper i.e. Creedmoor, BR etc.? I was looking at my AIAX 308 barrel and noticed that it has a substantial chamfer at the back of the chamber. When...
  3. C

    Impact Precision Actions

    I couldn't resist any longer, called up Impact yesterday afternoon and they had a action and 6 creed barrel on hand. Great service! It should be on it's way to my FLL Monday. My main compairson will be my AIAX. Unfortunately I have to wait for it to be imported into Canada so it will be a...
  4. C

    Impact Precision Actions

    This is the number one reason I am running an AI, I was absolutely shocked when it happened. Thanks for the response! The Impact actions look awesome.
  5. C

    Impact Precision Actions

    @Renomd how much lube do you run in your impact? My Accuracy International AX locked up on me during a two day match last weekend due to dust and now I am on the hunt for an action that can be run pretty much dry. My AI wont run with no lube without binding quite a bit.
  6. C

    School me on the 6mm creedmoor.

    I am running 6mm Creedmoor out of my AIAX. I chose it mostly for the availability of factory ammo. The Factory Hornady stuff shoots well out of my rifle. With reloads I am running mine with slower burning powders to attempt to preserve barrel life. I can push a 105 Berger Hybrid to 2987 fps...
  7. C

    Advanced Marksmanship Dry firing

    Are you guys using dummy rounds or snap caps when doing dry fire? I am worried about ending up with a broken firing pin in a middle of a match from too much dry firing.
  8. C

    Rifle Scopes USO B Series

    No problems, just questions when I was deciding on a scope.
  9. C

    Rifle Scopes USO B Series

    I am a new owner of a B25. Only had one range session so far but I really like the scope. I am coming from a Razor AMG, Bushnell ERS, Night force NXS in that order. This is the first time I have looked through a scope and said WOW this must be what people are talking about when the say 'good...
  10. C

    PRS Talk Barricade stop in McMillan stock

    This might work. https://www.facebook.com/IngenuityGunWorks/
  11. C

    Rifle Scopes Tangent Theta vs Minox ZP5 5-25 review

    Yes sorry ZP5, my ERS is 50mm and the ZP5 is 56mm, so I am just trying to figure out if I will have enough clearance with the current height rings or if I will need to go higher. Thanks.
  12. C

    Rifle Scopes Tangent Theta vs Minox ZP5 5-25 review

    Could someone who owns a MP5 please take a quick measurement of the objective for me? I have one coming to replace my ERS and I am trying to determine if I will need new rings. Thanks!
  13. C

    Switch Barrel Technology

    Thanks for posting this pic. How does this work? Does it clamp the threads when the cross bolt is tightened? Or does the bolt keep the barrel from backing out somehow? Just curious if I could convert my non quick-change AX to quick change.
  14. C

    Accuracy International Picture Thread

    I took the plunge got a second hand Pre 2014 AX, could not be happier so far. Should have just went this way from the get go. Groups below are with Federal GMM 175, and Hornady factory 6mm Creedmoor 108 ELDM...
  15. C

    Range Report First time out with Hornady 6mm Creedmoor 108gr ELD

    Factory Hornady 108 ELMD from my AI AX. Shot from bipod and rear bag off an old wood bench. Hornady 6mm Creedmoor lot#3163698 measured with magneto speed, 26 inch barrel. 10 shots Avg 2977 Sd19 Es58
  16. C

    What's everyone's favorite muzzle brake?

    Insite Arms Heathen, it doesn't blast the shooter and spotter as bad as some other brakes in my experience.
  17. C

    AI AX Pre 2104 QD Sling Mounts

    Guys, I recently purchased a used AI AX pre 2014 model and it has the clip style sling attachments. I would like to convert these to QD style, does anyone know if this is possible? I noticed that some pre 2014 AI AX guns have the QD's and some don't, and that the AI AX 2.0 also has the QD...
  18. C

    Finally got a 6mm Creedmoor

    I just joined the 6mm Creedmoor club as well. Barrel for my AI AX should be here any day. Can you guys comment on the Hornady 6mm Creedmoor brass. Is it good to go? I though that I read somewhere that when the brass first came out the primer pockets were going only after a couple of firings...
  19. C

    New GAP Extreme Hunter in 6.5 SAUM

    I tired it, results were not good. My go to load with prepped Rem 7 saum brass is 60.3 of H1000. 6 firings on this bras and still holds a primer no problem. With a magnetospeed I get about 3130 to 3140fps with 25" benchmark barrel. I loaded up the Hornady 6.5GAP Headstamped brass with 58g of...
  20. C

    New GAP Extreme Hunter in 6.5 SAUM

    Looks like some of the info from the old thread is missing. So I am looking for some help. For those who switched from the Remington brass to the Hornady head stamped brass from GAP, how much did you have to adjust your powder charge? Thanks!
Top Bottom
Back
Home
Forums
Merch
Alerts