Search results

Search the forum Search Articles
  1. crowsniper1

    Want to buy: Bergara HMR Stock

    I have one if you’re interested Id need $300 for it though
  2. crowsniper1

    FS: Weaver tactical 6x30x56 imdr reticle

    Mines marked down to 35 yards IIRC
  3. crowsniper1

    6.5CM New Rifle - Load Development

    I did some testing a couple weeks ago with my new Remington 700 6.5 26” Magnetospeed sporter used for test H4350 powder,new hornady brass and 140 gr hornady bthp 2.815 OAL Powder charge on left ,velocity on right side 41.————2670 fps 41.3———2675 41.5———2710 41.7———2718 good SD and ES here...
  4. crowsniper1

    200 New Hornady 6.5 creedmoor brass $85 shipped

    I’ll take it Pm incoming
  5. crowsniper1

    Dmtsc is good to go

    Bought a gap rifle from him,really good guy
  6. crowsniper1

    WTB Remington 700 BDL bottom metal LA and SA

    I have a 700 long action bdl plate ,spring and follower if you’re interested
  7. crowsniper1

    Gunsmithing New Remington 223 bolt is hard to close

    Its a new Remington 700 223 .I put around 30 rounds through it today load testing and it did great. I’ve never owned a 223 with a chamber this tight,it must be set at absolute minimum headspace ,the fired brass measured same as a new piece with my case gauge. I was worried about pressure but i...
  8. crowsniper1

    Gunsmithing New Remington 223 bolt is hard to close

    I was mistaken about the headspace gauge I don’t have go-no go set,i have the moe’s case gauge to measure the brass. Im going to check the plunger next to see if sits out too far. I tried some hornady tap and win white box factory ammo in it and both are a tight fit.
  9. crowsniper1

    Gunsmithing New Remington 223 bolt is hard to close

    Just picked this one up and checking it out before i shoot it I noticed that the bolts really stiff to close on new factory ammo,it will close but it takes some force,it closes hard enough that it leaves shiny marks on the base of the brass.I have a headspace gauge and measured the new brass...
  10. crowsniper1

    Remington 700P barreled action

    Has a basic parkerized finish,40X trigger around 3# , nice tactical bolt handle. It does have 5R rifling and the bore on mine looks really good. Id say it will shoot just fine,soon as i find a stock for it we’ll see.
  11. crowsniper1

    Remington 700P barreled action

    I bought one a few weeks ago but have not shot it yet.from what ive read they do good with 175 gr bullets.
  12. crowsniper1

    awonder is gtg

    Bought a HS precision from him ,shipped instantly.
  13. crowsniper1

    Rifle Scopes Bushnell DMRIIi impressions

    My ERS was an excellent scope just too heavy for my needs
  14. crowsniper1

    Nosler 6.5mm 140gr RDFs for sale.

    I will take them
  15. crowsniper1

    What was your Scout name?

    Same user name for me through all the years and changes.
  16. crowsniper1

    Rifle Scopes Athlon Scopes

    I like the looks of them ,may pick one up soon
  17. crowsniper1

    Rifle Scopes New to me SWFA 20x42, Mils or MOA?

    Count the lines between the 3 and 4,theres 3 ,so its 1/4 MOA
  18. crowsniper1

    Rifle Scopes New to me SWFA 20x42, Mils or MOA?

    Its 1/4" MOA
  19. crowsniper1

    Rifle Scopes New to me SWFA 20x42, Mils or MOA?

    Mils are in tenths Moa in quarter inch
  20. crowsniper1

    90 Vld 223 Remington

    I have a savage .223 vlp 7 twist 26" barrel and play around with 80 grainers and varget but the throat is short on mine I think,I hit the lands at 2.40 OAL I have only tried it at 1,000 yards one time and it showed promise. Can I gain anything with 90 grain bullets? I have a variety of powder...
Top Bottom
Back
Home
Forums
Merch
Alerts