Search results

Search the forum Search Articles
  1. C

    Curtis 6bra..which mags/kits

    Just wondering if any of you have ran a 6br variant in a Curtis action and which mags and/or which mag kits did you use if any?
  2. C

    Gunsmithing 6mm BRA freebore

    Thank you @skeetlee! A good friend of mine with Big Buck Customs here at home will be doing the work for me.
  3. C

    Weatherflow Wind Meter Issues

    A friend of mine has a newer galaxy and was having trouble getting the weather meter to pair. It would pair fine with my iPhone and another friends android device. It was something to do with his phone not picking up the weather meter device. Try emailing them and see if they can help out...
  4. C

    Gunsmithing 6mm BRA freebore

    Man I like it when y’all tell me what I want to hear!!! Thanks for all the info guys!
  5. C

    Gunsmithing 6mm BRA freebore

    When you say “no turn” did you go with their recommendation of like .274-.275 on neck diameter? Or did you go a little tighter like the .272-.273 route? All the late Lapua Brass I have checked neck thickness has been around .0125. That should put a loaded round at about .268. I was thinking a...
  6. C

    Gunsmithing 6mm BRA freebore

    Thanks man! I think this is the route we will go.
  7. C

    Gunsmithing 6mm BRA freebore

    @Sheldon N i was hoping to hear from you as I have found some of your posts from the past! I seen a post from you sometime ago recommending the “Alex wheeler” reamer from JGS. Just to request a .272 neck for no turn. Would you still recommend this or have you found another design you favor more?
  8. C

    Gunsmithing 6mm BRA freebore

    Hey guys! I’m looking at having a 6bra built. Needing recommendations on freebore from the guys that have ran them. We are wanting to run the 105-110 class bullets. What do you think would be optimal for this? Also want to take in consideration being able to chase the lands if need be. Thanks!!
  9. C

    Range Report Truing BC...how much?

    So, just updated atmospherics & rifle info in 4dof. The only thing I didn’t change was the form factor which if memory serves correctly I had played with that in the past. Everything matched my trued dope in ballistic arc out to 800. 900 was giving .2 more than actual 1k was giving .3 more...
  10. C

    Range Report Truing BC...how much?

    @Rob01 i have not sat down and ran a full tracking test on this scope ( G2 razor) but it has ran true to 1200 with other bullets with very slight tweaking on the BC. Also I have the 4dof program and will run the numbers in it and see how they compare to what I have now in ballistic arc. I feel...
  11. C

    Range Report Truing BC...how much?

    @morganlamprecht the range was confirmed with 2 different rangefinders. So I feel confident about the range. The only thing I don’t have figured was a very, very slight downward angle to the targets from firing position....very slight.
  12. C

    Range Report Truing BC...how much?

    Thanks guys! The numbers lined up perfect. I was just second guessing because it seemed excessive. I pulled atmospherics from weather flow weather meter and in the past this has been spot on so I trust the system. @Lowlight thanks for the confirmation! I will verify everything this weekend or...
  13. C

    Range Report Truing BC...how much?

    When truing BC, how much adjustment is too much when adjusting the BC. 6.5x47 140 eld-m @ 2766 FPS. (Labradar) ES= 8 SD= 3.3 Shot from 200-1k From 600 & 700 I had to add about .2 From 800-1k I had to add about .3 To match up my calculator to my actual impacts I adjusted the BC from .646...
  14. C

    Gunsmithing Magazine pressure causing feed problems

    I have considered notching the feed ramp and may do that this winter while I’m not shooting as much. Thanks for the reply!
  15. C

    Gunsmithing Magazine pressure causing feed problems

    Ok. Got a chance to shoot this weekend and realized I do not have the issue with the accurate mag...it has a separate problem. While shooting/running the bolt my rounds slip forward in the magazine and get hung under the feed ramp. I will have to reach up and pull the round back in the magazine...
  16. C

    Suppressors DeadAir Sandman ti

    Glad you found it useful. There wasn’t a ton of feedback on repeatability while I was searching so I thought I would post this up. This was shot on a 6.5x47, 26” hvy palma. Which is the gun I shoot matches with so repeatability was my biggest concern. I will be testing it on a 700 sps tactical...
  17. C

    Suppressors DeadAir Sandman ti

    Done a little testing with the sandman ti today. Shot this group right after zeroing the rifle without the suppressor. This group was shot 2 rounds then removed the suppressor, waited about 15-20 minutes, put the suppressor back on and fired 3 more rounds....btw the flier is from the first 2...
  18. C

    Gunsmithing Magazine pressure causing feed problems

    Thank you! I will try that. Does anybody have any ideas of possibly a more permanent fix?
  19. C

    Gunsmithing Magazine pressure causing feed problems

    Action= 700 Chassis= MPA Mags= Accurate mag & magpul Noticed the problem when shooting off barricades. If my magazines have any pressure on the bottom of them, my bolt will not close. I will have to pull the rifle to the rear ( off the game changer) and run the bolt again. I have no feeding...
  20. C

    Suppressors Sig SRD762 QD

    Thanks for the replies guys! I have expierence with the sig cans through friends...suppression and durability is great! Just didn’t have much info in regards to accuracy, or how repeatable they are.
Top Bottom
Back
Home
Forums
Merch
Alerts