Search results

Search the forum Search Articles
  1. H

    Sidearms & Scatterguns 3 gun gear question

    Sell your shotgun and buy a VR-80, then you won't be sprinkling shotgun shells everywhere you run. But seriously, just go to the match with what you have, see if you like it before you spend a bunch of $$$.
  2. H

    Vudoo Gun Works V-22 Rimfire Bolt Action

    What chassis or stock/bottom metal? Vudoo will get you fixed up, but this seems to be always a "magwell holding the mag in the wrong place" issue. Sounds like the mag is a little low, if the bolt is skipping over the rim and hitting in the middle of the shell. I can't believe there are not a lot...
  3. H

    Observations On The Effect Of Parallax Error When Shooting With An Aimpoint Comp M5 And A Trijicon MRO

    I'd like to see the T-2 moved to the rear of the upper and the same test done.
  4. H

    22LR Performance in the Wind

    I wish someone would do some scientific studies to see if the different land/grove profiles (Ratchet for example) really do reduce wind drift, as claimed.
  5. H

    22 Conversion kit with suppression?

    Shoot it at 50 yards and look at your bullet strikes on the paper, if there are no keyholes, you should be GTG. I've shot 1000's of rounds through 10.5, 11.5, 16 and 20 inch barrels with no problems.
  6. H

    Match Stage Timer Suggestion

    I have had a PACT timer for years, and they work.... But I just got one of the Double Alpha SHOTMAXX-2 watch timers and it's the bomb! It can be adjusted down so sensitive (Airsoft mode) that I use it on my dryfire practice and it will pick up 100% of my unloaded gun hammer drops (STI 2011). You...
  7. H

    Is it still a .22 "trainer"?

    If you want to get REALLY good, and stay there, you have to shoot, A LOT. Getting into and out of position very quickly, trigger control, breathing, etc, etc can all be practiced at 100 yards and closer with a .22 without spending $1 per round on match ammo and all the time reloading. To stay at...
  8. H

    Optimal 22LR Barrel Length

    If you are shooting from stable positions (ie, bench, prone, etc.) I agree with your theory 100%. The "balance on a Gamechanger bag" argument also has some merit....BUT can be easily overcome by weights and/or a heavier bbl. Obviously, open sights need the longest sight radius you can have, and...
  9. H

    Vudoo Gun Works V-22 Rimfire Bolt Action

    Depending on the scope, you may lose some optical attributes running that close to the edge of the adjustment range at closer distances. Scopes are optically optimized at the center of their adjustment ranges. A 20-30 MOA base should work fine for your application, and you can always hold over...
  10. H

    Anschutz stock for Rem 700 action cut??

    Ken, that is a beautiful rifle!
  11. H

    Anschutz stock for Rem 700 action cut??

    It does look close. I may give them a call. Thanks!
  12. H

    Anschutz stock for Rem 700 action cut??

    Does anyone make an Anschutz 54.18 MS/R (NON thumbhole) style stock for a Rem. 700 action inlet? Thanks!
  13. H

    Convert a QD socket to non-rotating?

    No.
  14. H

    Solution for CLE 22LR upper misfeeds using M261 AR15 mag inserts

    I think these were made to run SV ammo, I never had any luck with HV stuff in the 2 examples I had. You would probably have to have a heavier recoil spring or a bolt buffer of some type to slow the bolt velocity down. McMaster-Carr will have your shim stock and the correct glue for the...
  15. H

    Solution for CLE 22LR upper misfeeds using M261 AR15 mag inserts

    I don't like the epoxy either, but it's the simplest solution.... What I would do ( because I have access to lots of stuff in my shop and lots of time to tinker), is find a very small setscrew, ie, 4-40 or 5-40 and drill a hole in the plastic body of the mag in just the right spot to stick up...
  16. H

    Vudoo gen 1 vs gen 2

    Shoot enough, and you will absolutely know if you can shoot better than the gun, and if the gun is holding you back.
  17. H

    Solution for CLE 22LR upper misfeeds using M261 AR15 mag inserts

    I would also compare LOADED mags and make sure the actual round is sitting in the same location and at the same angle. The BD and insert may not hold the round the same... Also, if you ever rest a mag (after your mag catch mod), while shooting, on anything it will raise the mag and cause feed...
  18. H

    Solution for CLE 22LR upper misfeeds using M261 AR15 mag inserts

    I use 240 then 320 black wet or dry, then hit them with polishing compound on a buffer or Dremel buff pad. Sounds like your mag catch location in your lower may be too high, do you have another lower you can try and see if you have the same problem? The empty mag should NOT touch the bolt...
  19. H

    Solution for CLE 22LR upper misfeeds using M261 AR15 mag inserts

    I pulled the inserts apart and polished the sides of the follower and the underside and top of the feedlips. But I do this immediately to every new gun I buy before I even shoot them, so I never had a misfeed problem to begin with. Flatnose and HP bullets cause trouble also. Mine worked perfect...
  20. H

    How to store match 22lr ammo

    How do you just dump 10 rounds out into your hand? Do you actually pick out 10 rounds individually from the Pelican box? Looks to me like all the add'l handling would just damage the rounds more than just leaving them in the factory box, sliding it to 10 or 5 rounds and dumping it into your...
Top Bottom
Back
Home
Forums
Merch
Alerts