Search results

Search the forum Search Articles
  1. C

    Range Report 7mm Creedmoor

    Yea, good info. I have only 2 reloads on this brass. I will watch it. Maybe next round I will just neck turn. I did run alot of horandy brass when I first started. Never seemed a issue. But Hornady is thinner in the shoulder. Maybe not as bad with the Hornady. Another factor is the Creed case...
  2. C

    Range Report 7mm Creedmoor

    OP asked about a 7mm that fits in a SR25 pattern mag. I load to 2.850 oal. 7 creed fits in a mag better than 7/08 for the same reason 6.5 creed fits better than 260. My 7mm even loaded @ a more tame velocity visibly smacks steel much harder that a 6.5 creed and runs with it for drop, beats it...
  3. C

    Nosler 140 g RDF

    No. Took them to 1k in 6.5PRC @ close 3000 fps. But every other bullet I tested shot low compared to what my AB kestrel said it was supposed to. The RDF was spot on.
  4. C

    Nosler 140 g RDF

    They fly good. BC was spot on.
  5. C

    Range Report 7mm Creedmoor

    I have been running one for about 3 years. Several thousand rounds down the tube. I love the round. Super easy load development. And always consistent. 162 eldm @ 2820fps, ain't no slouch. Wish someone made brass, but not that big of a deal.
  6. C

    7mm SAUM Brass

    If ADG does saum you won't need anything else. They make nice brass. There will be a lot of guys building saums just because of that.
  7. C

    6.5 PRC

    Mark has magic dust! VERY NICE RIFLE!
  8. C

    ar 10 in 7mm-08

    Lol. Whoops!
  9. C

    ar 10 in 7mm-08

    Anything a 260 will do a 7mm will do better, just with a little more recoil.
  10. C

    6.5 PRC load data

    52.6grns of what appears to be RL something? Maybe someone will recognize this. I pulled this from a 147grn factory Hornady.
  11. C

    6.5 PRC

    Velocity of factory ammo will be dependent upon the reamer used. In my rifle 147s jump a mile, and velocity is on the low side of advertised. A tighter chamber would certainly be faster. Pusher591, that rifle is beautiful!
  12. C

    6mm Creed Scattergun

    Put a q'tip in barrel and use the camera to push the q'tip in alittle, then pull the camera back a little to veiw the barrel. You will be surprised how much better you will see inside.
  13. C

    6.5 PRC

    Factory Creedmoor is going to be slower than factory PRC. The chamber in your rifle will effect the velocity you get out of factory ammo. You can hot rod the Creedmoor, or you can hot rod the PRC. give the same pressure PRC wins. You can hot rod the SAUM and it it beats both of them...
  14. C

    6.5 PRC

    Same here^^
  15. C

    6.5 PRC load data

    Yea man I hear ya on h1000, I was dead set on it since I have alot, and really liked it in my 338L. If I don't stop jacking around with load development I will be able to give you a round count on this barrel soon. Lol! I am working with some 140 hybrids and 4831sc right now that I am VERY...
  16. C

    6.5 PRC

    My rifle ran factory 147grn eldms @ 2865fps out of a brand new barrel. Now with 400rnds down the tube 2890fps.
  17. C

    6.5 PRC

    I am working with one right now. here is a link to what i got so far. https://www.snipershide.com/shooting/threads/6-5-prc-load-data.6878053/#post-6986953.
  18. C

    6.5 PRC load data

    Loaded 5 140rdfs in the middle of the velocity flat spot at 54.3grns. Ran them over the Chrono. Pretty happy with the results.
  19. C

    6.5 PRC load data

    53.9
  20. C

    6.5 PRC load data

    54.2
Top Bottom
Back
Home
Forums
Merch
Alerts