Search results

Search the forum Search Articles
  1. T

    Help stuck need help!!!!

    I'm sorry and feel free to slap me if you ever get down this way ;-) The all thread is basically a drill bit. If nothing else, an abrasive. I will guarantee you that zink coating is harder than a 4140 or 416 bbl. I'm sure the rubber lining in you hose was thinner in spots when you were done.
  2. T

    Gunsmithing Jewell Trigger Issue

    Might want to rethink this kitty skinner ;-)
  3. T

    Gunsmithing Jewell Trigger Issue

    No, Look at the side plates from the front or rear or put a straight edge on them. The prob child I mentioned had side plate bowed in the middle. Check to see if the sear moves up and down freely when it's off the action. When p/c was installed it pinched the sear. I know hitting it with a...
  4. T

    Model 700 4" COAL magazine?

    You can easily get .125" more out of a BDL. If you are at 3.93" now, 4" should be no prob. Just cut the back of the box out and weld on an extension. It will require milling the box recess in the rec. back as well as the bolt stop. Could be done with a dremel. Done it many times to a short action.
  5. T

    Help stuck need help!!!!

    Damned Yankee's ;-0 Why worry about the crown if you are going to grind the throat and rifling out with a piece of all thread? Can't fire a blank because it won't chamber, if it's a gas gun just move the block so the ports don't line up. ;-) Grease gun is the salvation ;-)
  6. T

    Benghazi Starting to Boil

    Back at Ya. I think this time will be different. Too much going against 'em. Hiding survivors so they can't talk should be enough to sink the ship. Beck (I know most hate him as much as y'all do me;-) ) came out within days saying we were running arms to Syria thru Turkey. He has Seals in his...
  7. T

    Gunsmithing Jewell Trigger Issue

    Sounds like one I saw go in the other day. The side plates of the housing were bowed and they were pinching the sear. Couple of whacks with a hammer got 'em straight and it worked like a charm;-)
  8. T

    Gunsmithing Show off your barrel flutes!

    Almost forgot this one. With a little color case accent ;-)
  9. T

    equipment vs. skill

    You need to drink faster! Let it rip ;-)
  10. T

    MasterCam X7 4th axis question

    Try Chad at Longrifles inc. Seems he's pretty good with that stuff.
  11. T

    This may answer the question

    Milwaukee says it all! The Mason Dixon line has moved. Anything north of Ok and west of Tx sux ;-) Sad thing is we're being invaded too!
  12. T

    Help stuck need help!!!!

    I was thinking swimming ;-) That's the way you bitches treat me ;-) BTW Thanks for the chuckle! OOL
  13. T

    Benghazi Starting to Boil

    Rush just said that Boehner appointed a special committee to investigate. Trey Gowdy is going to head it ;-) This is going to get good! ;-)
  14. T

    Help stuck need help!!!!

    Yep, someone came up with the idea for pushing crap out of muzzle loaders. Brilliant! ;-)
  15. T

    Benghazi Starting to Boil

    O'Reilly knocked it out of the park last night. We've reached a monumental low in our development as a society :-( Gen. Hamm (who was in the white house on 9/11), billary, most of congress and obongo should face the firing squad for treason! Along with the lame stream media for being complicit ;-)
  16. T

    Help stuck need help!!!!

    Sounds like a recipe for disaster. If it's threaded you can make an adaptor and pump it out with a grease gun. ;-)
  17. T

    Gunsmithing Lug Lapping?

    Glad to help. Good luck with the 'yote. Filing or dremeling works better and faster. Lapping can allow the cocking piece to move over and drag on it's slot. Nothing that can't be corrected but why waste time. ;-)
  18. T

    Gunsmithing Show off your barrel flutes!

    Here's some of my crap. 16 opposing flutes
  19. T

    Gunsmithing Show off your barrel flutes!

    Thanks CNJ. I'm pretty sure Chad has blocked me by now ;-)
  20. T

    Gunsmithing BAT Machine Action firing pin spring removal

    It'll be under tension. Just clamp the pin in a vise when you unscrew the cocking piece and hang on. ;-)
Top Bottom
Back
Home
Forums
Merch
Alerts