Search results

Search the forum Search Articles
  1. pmarkov

    Rifle Scopes March 1.5-15x42 inquiry

    It's been more than a month since the first units have arrived... Are there any initial thoughts or impressions from those who have received them?
  2. pmarkov

    Night Vision Andres Industries PumIR 6 Info?

    My last reply from them was for availability around end of February, beginning of March. This was the fourth time they made a promise which they did not keep the previous three times. My preorder was confirmed back in May 2022. So, I finally decided to cancel it.
  3. pmarkov

    Night Vision Andres Industries PumIR 6 Info?

    After I got my last reply in January that the release of the product was postponed again, I decided to cancel my preorder and to look for another product. It will be a whole year of waiting for this device. In the area of thermal optics development and product variety, one year is not a short...
  4. pmarkov

    Night Vision Andres Industries PumIR 6 Info?

    They have two options for the ocular: 1x mag and 0.5x mag. These are not replaceable, so that at the time of the order, you will have to choose which one you will get. The front lens attachment has 2x magnification. So, in theory if you use the front lens and 0.5x demagnified ocular, you...
  5. pmarkov

    Night Vision Andres Industries PumIR 6 Info?

    I am still unsure how to proceed. I think I will make one last inquiry in January about their progress and then I will decide... They are saying that there will be separate collimation processes with and without the lens. And for the different digital magnifications also. And all of them will...
  6. pmarkov

    Night Vision Andres Industries PumIR 6 Info?

    I did make a preorder for PumIR 6Z .5 back in May 2022 and I was enrolled for the first batch. At that time the release date for this product was scheduled for July/August 2022. Afterwards, when I asked them, they said that it was supposed to be ready around late October or early November...
  7. pmarkov

    MDT Elite rings HELP!!!

    Thank you all...
  8. pmarkov

    MDT Elite rings HELP!!!

    Sorry, to revive a 3-year old thread... I have just acquired a set of MDT Elite rings 1.5" high with the integrated bubble level. The manual cited above says that the ring with the bubble level should be installed on the front and the ring without the bubble should be installed on the rear of...
  9. pmarkov

    Bulletseeker Mach 4 doppler chrono

    ... Or keep it mounted as it is and just try it with the parabolic adapter. It is supposed to raise the detection range of BS.
  10. pmarkov

    Bulletseeker Mach 4 doppler chrono

    I have received my parabolic adapter for the Bulletseeker and I hope that it would resolve the problems with AR-15 rifles, which I posted before. Meanwhile, for all those who were waiting like me the release of the iOS version of the app, I suggest to contact directly Klara from...
  11. pmarkov

    Trigger cam or tactacam

    I also have both - Tactacam and Triggercam. I prefer the Triggercam. It provides a better picture quality to the eye and to the video. I have just compiled a video comparing both cameras in real environment. Both cameras were set with the same parameters for resolution and frames per second.
  12. pmarkov

    Bulletseeker Mach 4 doppler chrono

    I did not change any settings with the guns that were mentioned above. I used the default settings for sensitivity set to "1" with all of them. I changed the default settings when I tried it with the AR-s, but with no success. EDIT: I have just received the following reply to my enquiry: "Hi...
  13. pmarkov

    Bulletseeker Mach 4 doppler chrono

    I would like to share some experience with the new Bulletseeker Mach 4. I have personally tested it with several rifle systems: - Ultimatum Deadline custom rifle in .308 cal with handloads - Tikka Super Varmint rifle with 16.5 inch Proof Carbon barrel and factory hunting ammo - Blaser R8 6.5...
  14. pmarkov

    MDT introduces the HNT26! A 26 Ounce Carbon Fiber Hunting Chassis.

    My order date was March 20th 2021. My HNT26 Chassis is for a Tikka short action, if that makes a difference in the lineup... The bipod stud is not movable, but it is re-movable. I got rid of mine and I am able to slide my Ckye Pod along the whole length of the Arca rail. If you keep the stud...
  15. pmarkov

    MDT introduces the HNT26! A 26 Ounce Carbon Fiber Hunting Chassis.

    Here are some unboxing pics:
  16. pmarkov

    EarPro with Radio

    I believe that 3M tactical earplugs TEP-200 can be used with a neckloop which can wirelessly transmit radio comms from the radio to the earplugs and vice versa. I do own a set of these plugs and they work pretty decent for sound attenuation, especially if used with memory foam tips. But I have...
  17. pmarkov

    "Vibram" rubber shoes for CKYE POD Tripple Pull

    The inner diameter of the rubber ball is around 21.5 mm. Being rubber, it can stretch a bit... The outer diameter of the CKYE-POD Tripple Pull leg is around 22.2 mm.
  18. pmarkov

    "Vibram" rubber shoes for CKYE POD Tripple Pull

    As we all know, the CKYE POD Tripple Pull legs have wider diameter, hence they are not compatible with Atlas feet like the original CKYE POD. I am not aware of any existing options for replacing the spiked feet of the Tripple Pull, if someone wants to shoot from sliding surfaces like smooth...
  19. pmarkov

    Who makes the affordable plastic "tactical tables"?

    Maybe this one: https://abelcousa.com/collections/abel-table
  20. pmarkov

    Triggercam on a zc527

    The model of the camera itself is: Tactacam 5.0 Actually, there are two versions of Tactacam 5.0. One is like the picture above: with power button flush with the corpus of the camera. The other is like the picture on the link from their website below. I was told by their CS that there is no...
Top Bottom
Back
Home
Forums
Merch
Alerts