Search results

Search the forum Search Articles
  1. number1olddog

    ? about Mcrees stock screw settings

    I recently received my Mcrees stock for my Savage 10 P-SR. I cleaned off underside of receiver and barrel/recoil lug area and mounted and equally tightened the front and rear action screws by hand. I then torqued to 65 inch pounds as stated. I noticed that the front screw in chamber area sits...
  2. number1olddog

    Back in the game again

    Been a while since I posted last but I just finished this up and am pretty excited about it. I know it's no Surgeon or 5R but I'm pretty proud of it. I had a Savage 10FP a while ago but traded it and was probably the dumbest thing I ever did. Anyways, it's a 700 Tactical with B&C Light stock...
  3. number1olddog

    Bolt handle problem with 10FP

    Re: Bolt handle problem with 10FP <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AXEMAN</div><div class="ubbcode-body">the one i got i had to send back, most people say they have to get at it with a file. mine was terrible. clunked and rubbed all the way around...
  4. number1olddog

    Bolt handle problem with 10FP

    Re: Bolt handle problem with 10FP it is on correctly. I found that if the screw is not really tight against the handle it will cycle. Once I screw it on tight (about 15-20ft lbs.) it will not cycle at all. I put the old one back on and of course it cycles like glass. I don't really want...
  5. number1olddog

    Bolt handle problem with 10FP

    So I am still new to the bolt action game. This is what I ran into today when I received my new bolt handle from tactical works. I took off the rear screw and took off my original factory handle and replaced it with this new handle and then put the screw back on. I then put it back into the...
  6. number1olddog

    Savage 10FP extractor detent

    Re: Savage 10FP extractor detent Thanks
  7. number1olddog

    Savage 10FP extractor detent

    I Was cleaning my rifle after I got back from the range and when I got to the bolt face the extractor slid out and the detent of course flew out. I just wanted to make sure that I did it right. Is there the one spring and one detent(ball bearing) and of course the extractor that slides over the...
  8. number1olddog

    delete

    delete
  9. number1olddog

    Bell and Carlson warranty

    Anyone have any experience with warranty work done with B&C and how long it took to get it back?
  10. number1olddog

    Blind mag ?

    Re: Blind mag ? I do have the new style with the 4.40 screw spacing. There is one L shaped bracket that coincides with the rear of the metal clip but when pushed down into the stock it will not hold itself into place. It does hold itself into place on the original factory stock but not into...
  11. number1olddog

    Blind mag ?

    Installed a B&C Medalist on my 10FP and after I put it together I noticed that the bolt was riding on top of the rounds in the mag. I took it back apart and reconfigured the mag a little and the same thing. I took it back apart again and wiggled the blind mag and put the action on top of it...
  12. number1olddog

    Hello all. FIrst post with pic

    Am a member on other sites but have been lurking here for a while and see it offers great info on my long lost hobby. Here's my contribution. Savage 10Fp
Top Bottom
Back
Home
Forums
Merch
Alerts