Search results

Search the forum Search Articles
  1. B

    carbon fiber stocks from evil empire

    Those are very clean looking. Is the inletting machined or molded in?
  2. B

    Badger Ordnance M2008 Gen 2

    I have one. Haven't had the chance to do some real shooting with it yet, but will say I like the 60degree bolt throw. They are heavy that's for sure. As Cav said the bolt lift is a bit heavier then others but I it should become somewhat lighter with use.
  3. B

    Phoenix Custom Rifles lead times and services

    Picked my rifle up today. Looks awesome. Will get pics up later and hopefully a range report. Ok got some pics and started on some load data today. So far looking like its gonna be awesome. Thanks again guys!
  4. B

    You'll never believe this.

    Sounds like what I did today. Went to a local shop just to see if they had anything at all. Bought the last 2 boxes of Hornady 162gr 7mm Amax and the last 2 pounds of H380 they had.
  5. B

    RCBS neck sizing bushing dimensions

    Im wondering if any one could supply me with the dimensions for a neck sizing bushing for a RCBS Gold Medal Full length bushing sizing die in 7mm08. So I would need OD and length. I bought the die with out knowing it did not include a bushing. Just need to make one dummy round for my gunsmith...
  6. B

    Phoenix Custom Rifles lead times and services

    Ya a full build. Badger M2008 in 7-08, McM A5, Seekins DBM.
  7. B

    Phoenix Custom Rifles lead times and services

    I'm in the same boat. Dropped of the parts end of Jan. Was told 4-5 months. They started my build yesterday. Just need to drop off a dummy round for them to check the throat depth.
  8. B

    Suppressors Encore suppressed

    I recently picked up a Encore pistol frame. I am wanting to order a barrel specifically for subsonics, and wanted to do one in .308 because dont want to need new reloading stuff. Would a 8" 1-8 twist for heavier bullets be unreasonable? Or would I just be better off going the 300BLK route?
  9. B

    Best overall SA 308 bolt face competition caliber?

    Re: Best overall SA 308 bolt face competition caliber? I dont shoot matches that often, but im currently building a 7-08. I picked it due to the barrel life, the fact that I also have a butt ton of 308 brass, and from the research I did for load data. I have seen many postings of 2700ish with...
  10. B

    .308 to 7mm-08 annealing

    Re: .308 to 7mm-08 annealing Good info. I will be resizing m118lr brass down to the 7mm08 so the neck will probably be fairly thick. I however dont have the rifle built yet so I still have time to square away my reloading needs before i have anything to shoot.
  11. B

    .308 to 7mm-08 annealing

    Re: .308 to 7mm-08 annealing Exactly what I wanted to know thank you!
  12. B

    .308 to 7mm-08 annealing

    I did a search but did not find anything pertaining to my question. I will be resizing. 308win brass to 7mm-08. Would annealing be advised? I pretty sure it wouldn't hurt anything to anneal but if I'm going to anneal I need the equipment. Thanks, beans.
  13. B

    Badger M2008 Builds.....Where are they?? Pics...

    Re: Badger M2008 Builds.....Where are they?? Pics... Here is my M2008 build I am working on. Badger short action will be in 7mm-08, Obermeyer AMU profile blank 1:8.25 twist, Mcmillan A5. Hope to have it finished in the next few months.
  14. B

    7mm-08 COAL options

    Re: 7mm-08 COAL options Ok thanks! I asked the smith his opinion and he said he didn't have experience with handloading for 7mm-08. So I came here to get some opinions. ETA - the mags will still be used on my .308 so not looking to modify them.
  15. B

    7mm-08 COAL options

    Ok, so I am having a new rifle built in 7mm-08. It will be in a Badger M2008 action. Im trying to decide on the load length I will use and have the chamber cut for. Wanting to stay in mag length with a 162gr amax for .308 AICS mags, which I measured out to 2.900" total internal length for a 5...
  16. B

    Suppressors 17 HMR Suppressor

    Re: 17 HMR Suppressor The main issue with 22lr through a sealed can is the bullets being lead will have some of that lead be melted off and deposited in the suppressor. 17hmr uses jacketed bullets so that should not be a problem. As far as baffle design it has mostly to do with pressure at...
  17. B

    Bullet choice for 16" 308?

    My rifle is a rem700 sps tac based setup cut down to 16". Im wondering what bullet weight would be a better choice for still getting to 1000 yards. Either 175s or 155s. Im not concerned with transonic issues. Just want to know which would be more viable for this setup. Beans
  18. B

    Rifle Scopes Quick Look **USO PSR Scope

    Re: Quick Look **USO PSR Scope Looks like a nice scope. As far as the new digital illumination, that can be had on all new scopes as of this point in time correct?
  19. B

    Rifle Scopes Owners of 35mm tube SN3 3.8-22x44 experiences&Pics

    Re: Owners of 35mm tube SN3 3.8-22x44 experiences&Pics For the USO scopes than with a 34mm or 35mm tube how much extra elevation do you gain over the 30mm?
Top Bottom
Back
Home
Forums
Merch
Alerts