308

  1. G

    Range Report Accuracy International AT 308 range report. Handloads

    I just tried some of hand loads last weekend. 24 inch AI barrel I swear to god, my rem 700 shoots a lot better. most of my rem 700 shot falls under .2~.5 moa with 168 HPBT 41 grains IMR 4895. I bought the AIAT used, I am not sure how many rounds it has gone through but whatever, I will...
  2. D

    Remington 700 VTR

    So gotta ask here because I don't know where else to ask. I know someone is going to hammer me for asking an ignorant question but whatever! I've got someone local to me selling a Remington 700 VTR .308 with a Vortex Diamondback 4x12x40. Says it has less that 300 rounds through it. I know...
  3. EXSOCAL

    LMT MWS Alternate Upper Receiver - Success

    After doing a lot of experimenting and asking around, I finally found a "traditional" upper receiver that fits the LMT MWS lower. In my search I tried a Larue OBR upper, an Armalite AR10a upper, and the Centurion Arms MK11 upper. Most everyone knows the about the lack of standardization among...
  4. C

    Firearms Smith and Wesson

    Looking to buy Smith revolvers 2-4 inch barrels , Model 24 , 27, 28 , 66, 624 , 625 , 29, 629 ,659, 586,686 etc..... let me know what you have and we can go from there. Thanks in advance.
    • chart1300
    • Thread
    • 308 357 41 mag 44 mag 45 lc 6.5creed colt remington springfield winchester
    • Replies: 2
    • Forum: Buy - Sell - Trade
  5. Longshot79

    Reloading Equipment Redding .308 FL SB sizing die (Full Lengrh Small Base)

    Redding .308 FL SB sizing die (Full Lengrh Small Base) for sale. Perfect for AR10 Rifles $40 includes shipping to lower 48
  6. impactaddict

    Reloading Equipment SOLD!!! 308WIN - Federal Gold Medal Match Brass

    Fired from a custom bolt gun and unprocessed. All prices include shipping 1000pcs - $110 ($0.11ea) 500pcs - $70 ($0.14ea) 100pcs - $25 ($0.25ea) Payment methods: Please do not include any notes! PayPal F&F or +3% for G&S Venmo Money Order Cash F2F
  7. S

    Accessories (Sold) AAC Muzzle Brake (AR10) $50 shipped

    (Sold) Selling an AAC Mizzle Brake I took off my Seekins SP10. I sold the gun and no longer need the brake. I’ve only got one shim with it, so depending on your rifle threading you may need to order some extra shims. $50 shipped.
  8. S

    The tale of two 308 reload batches

    Hi folks, I'm working on developing my 308 handloads for a 16" AR10, and came across the following observation. I'm a bit perplexed as to the root case, and am hoping the community can shed some light. I made two batches of handloads: same bullet, same powder load, two different brass, and...
  9. skyewalker

    Accessories LMT MWS 16” 308 barrel

    16” 1-10 CL standard weight. Round count unknown but shoots well with 178fgmm. Stamp came in so I switched to 13.5”. $400 net to me, shipped to you.
  10. S

    Firearms (Sold) Like new Windham Weaponry 6.5 Creedmoor $950

    I’m selling a Windham 6.5 Creedmoor. I’ve shot this gun 14 times. It shot sub moa with the factory Hornady ammo I shot (143gr). I intended for my wife to use it as a hog gun, but she never got interested, so it has just sat in my safe. It’s in mint condition. Plus an AAC Brake. $950
    • SB84OK
    • Thread
    • 308 6.5 6.5 creedmoor ar10 hunting longrange shooting
    • Replies: 17
    • Forum: Buy - Sell - Trade
  11. J

    Firearms GA Precision .308 w/ 23 inch barrel Manners T2A SOLD

    Selling my GA Precision .308 with a 23-inch barrel, Manners T2A, Threaded barrel, Badger Ordnance FTE muzzle brake, and EFR. Selling it because I haven't had a place to shoot long range. It is easily the most accurate rifle I own. The barrel is broken in with about 400-600 rounds through it...
  12. Z

    Short Action Question

    Hi everyone, I have a question thats probably a no-brainer for you guys. I'm new to long range shooting and I'm trying to build a Remington 700 in 308 right now, but I think I may want to convert to 6.5 Creedmore down the road. Will I be able to keep by bolt and my receiver and just swap out...
  13. RprtasteforLR

    .308 AR BCG recommendation

    So I've decided to assemble myself an ar10. I have an aero precision upper and assembled lower on the way. I've been trying to research a good bcg for this build but theres lots of options. I'm probably going to put a 20" criterion barrel on it and use it for long range shooting. Any help or...
  14. Aquapaul

    Desert Tech 26" 308 Barrel, SRS A1

    Have a barrel only for sale 26" Desert Tech, not sure how many rounds for sure have been through it. Guessing a 100-200. It has a Terminater T3 brake installed that goes with it. $700 shipped via USPS
  15. J

    Howa 1500 APC .308

    Any recommendations to replace an MBA-4 milspec butt stock for precision shooting? I’d like to adjust my Howa .308 to a precision rifle with as much reliable accuracy as possible and welcome any advice. This is my first post & first AR, albeit a bolt action. My primary goal is precision with...
    • JarrodTX
    • Thread
    • 308 accuarcy bolt action butt stock chassis howa 1500 mba precision weatherby
    • Replies: 2
    • Forum: Bolt Action Rifles
  16. C

    Machine Gun Brass Resizing Woes

    Thanks for clicking! I happened upon a pretty large sum of 7.62x51 brass that just so happened be fired through a M240B. As you may know, the chambers on MGs are quite loose. This causes a real issue while full length sizing. I'm trudging through sizing using a hornady FL die and Redding...
  17. Bebop

    (SOLD)Accuracy International AX 308

    (SOLD)Accuracy International AX Pale Brown .308 Win 24" Rifle 1-10 twist 3-10 round magazines Exactly 339 Rounds fired I am looking to move and need the money so some toys have to go.
  18. 1501Para

    Larue FDE limited 308

    Excellent shape under 100 Round count. Added SSAE trigger and Talon safety along with FDE SOP MOD Contract stock and FDE KAC M110 grip. $2800 OBO
  19. GaryT

    Scar 20s

    Selling my scar 20s. Has exactly 80 rounds and one range trip where I was seeing slightly better than 3/4moa with fgmm 168 grain. Comes with three 20 round fde mags and one 10 rounder. Has Surefire muzzle brake. Optic and bipod not included. Only reason for selling is I want a 6.5cm bolt gun...
  20. O

    Gunsmithing Muzzle brake torque/crushing a rifles crown?

    I am working on installing a muzzle brake (Precision armament m4-72) on my heavy barrel 308. I chose to get the PA accu-washer shim set to time the brake. I chose the one I thought was correct, but when tightening down the brake, I could not get it to index properly. Didn't use a torque wrench...
Top Bottom
Back
Home
Forums
Merch
Alerts