700

  1. B

    Gunsmithing remmy 700 mag

    I've got a 700 SA off being rebarreled in .223AI, I want to run the 75gr Amax... and I want to increase the factory mag length a bit so I can seat the 75's out a bit. Any suggestions? Cutting the block out of the back of the mag would be the obvious route to go
  2. mark5pt56

    Rifle Scopes Seekins base screws for Rem 700

    I aquired a Seekins 20moa base and 30mm rings(lightly used) today and the base did not have the 4 screws with it. Where can I find the four screws I need? They would be the standard 6x? (Rem 700) Please advise. Mark
  3. N

    700 SPS Tactical as first gun?

    Hi all. This is my first post even though I have been reading the forum for some time. I am looking to get into long range shooting (300-1000 yards) as a hobby. My local dealer has an SPS Tactical 308 in stock that I am pretty tempted to buy. I have been wanting the LTR, but those seem very...
  4. Twisted

    Got a new stock for my 700 (pics)

    Before with the stock stock, (Hogue overmold) After with a B&C A2 Medalist.
  5. L

    Gunsmithing stiff bolt on 700 SPS .223

    Hi all. My dear wife decided that now she really has the shooting bug, and we've bought her her first bolt rifle a 700 SPS in .223. The gun is remarkably accurate for not being free floated or bedded, and she shoots it pretty well (this being the second time she used a bolt gun with a scope she...
    • loch
    • Thread
    • 223 700 bolt sps stiff
    • Replies: 22
    • Forum: The Armory
  6. M

    A Look @ Choate New Tactical Stock - Rem 700 Tact

    <span style="font-weight: bold">Choate's New Tactical 700 BDL stock. </span> <span style="font-weight: bold">The Specs: </span> The stock is made of Rynite polymer and is injection-molded around a precision CNC machined full length aluminum bedding block makes a solid rigid stock. The...
  7. S

    Gunsmithing what mag system?? rem 700 6BR??

    What would be the best magazine system for a remington 700 short action, if i were to chamber the barrel for a 6br?? I didnt know if one type would work a little better than another? thanks Lee
  8. mark5pt56

    700 feed issues

    I was shooting my new 700P today and once in a while the bolt would ride over the rounds in the mag. They were loaded properly, down, level and back. Is it possible that something isn't cut right in the receiver? Mark
  9. C

    Modular stocks for Remington 700's

    I am looking for input /websites/pix on modular rifle stocks for Rem 700 actions. Any help is greatly appreciated.
  10. U

    Remington 700 Question

    Gents, Have recently moved to Hawaii and saw a 700 LTR in 308 in 20" going for 1200 bones today. Actually had both 223 and 308 on the shelf. I thought this price was a little steep but with a quick check on gunbroker it looks to be right around the asking price of many others. My question is...
  11. G

    rem 700 sendero 300 win mag

    what is this worth if anyone can help me out i would appreciate it. its got the jeweled bolt 26 inch stainless barrel and the hs stock. its also got a leupold vari x III 3.5 x10 on it. its an amazing shooter but i need some new glass so its got to go. heres a pic of it
  12. rc2125

    700 rem spsv .243, aics/ai mag, will it feed ok?

    Ordered an AICS for rem 700 short action .243, Will the rounds feed ok out of the Ai mag? Assumed they would, but might as well ask....googled and only found some info on a 243ai having some issues.
  13. D

    Gunsmithing REMINGTON 700 ACTION SPECS?

    I need to get a factory spec sheet on the 700 action. I am particularly interested in the OD dia / Rad both front and rear since they are different from each other. Thanks.
  14. NY700

    david tubb rem 700 bolt?

    I am on a tight budget with little room forr error in building my dream stick. Does anyone have any experience with the supperior shooting supply remington 700 replacment bolt by David tubb. Seams like a good deal compared to truing up my factory original. Any ideas on the topic would be great.
  15. T

    Photos Rem 700 and Rem 870 in OD Green!

    Hey guys, So I took the time to redo the paint job on my rifle. Although I don't have a lot of pics of the pint its self, I looks MUCH better then it did last time. I also have a new scope. The Falcon 4-14 for the few who may not know from looking. I also added a little more texter to the...
  16. C

    Value of low-mileage rem 700 take-off barrels?

    Just curious, I may soon have a 20" .308 take-off with 40 rounds through her and wondering what these are going for when they pop up. Any ideas?
  17. M

    Help with my custom remington 700

    Here's what I have: McMillan A4 stock, Stiller Tac 30 action (.308 boltface), Brux 22" barrel, Jewell Trigger, Harris Bi-pod, CDi Precision bottom metal, AI 10rd mag. Now I already modified the stock to house the bottom metal. My question is what do I need to have a gunsmith do? Approximately...
  18. SNIPERALEZ

    Rem 700 6.8 SPC

    Got this one with the help from the 308 match ammo sale, Thanks rain252. Has the Timney trigger, Burris Signature rings and the Leupold has the Varmint Hunters reticle, should make for an excellent coyote gun: Thanks for looking, Ed
  19. M

    Finding the right barrel for my Remington 700

    I just built a Remington 700 in 300 Win Mag using the SPS action/barrel on a McMillan A5 with a Horus Scope. First time at the range today. Beat the hell out of me. Well, maybe not that bad but unpleasant to fire to say the least. Think I'd like to change out the barrel for something a bit...
  20. D

    Range Report New 700 build range report

    I bought this rifle about 2 years ago. It was a 700 SPS-V .308. I paid about $480 out the door for it, bought an HS stock on ebay for around $200, old style trigger set at 2.5 pounds from tac-ops for $100, cut to 21", re-crowned and threaded for $60, steel bedded for cost of materials $20, YHM...
Top Bottom
Back
Home
Forums
Merch
Alerts