• RIX Storm S3 Thermal Imaging Scope WINNER!

    Thank you to everyone who particpated!

    See the winner

ar10

  1. stintedAIR

    Rifle Scopes Trying to 'understand' what scope mount to use

    This is the first high end scope I've mounted on a rifle. The scope is a Schmidt & Bender 3-20x50 PMII. For reference, the diameter of the objective lense with a scope cap is just over 60mm. It's going on a Daniel Defense DD5V5. I've done countless searches, and it seems like everytime I find...
  2. Tactically_Advantangeous

    Firearms WTS Custom 6.5 Creedmoor AR

    As the title says, selling my 6.5 Creedmoor AR10 platform. Recently engaged and now needing to fund a destination wedding, I'm having to sell a couple of my prized possessions. my loss your gain. The rifle was built with hand picked components that are top of the line and some of the lightest...
  3. Kpchurch

    Rifle Scopes AR-10 - LaRue 6.5 Scope Recommendation

    About 6 weeks ago I ordered a 22” LaRue 6.5 AR-10 and is my introduction into an AR and Long Range shooting. I’m aware that bolt action is preferred/beneficial LR platform and will most likely be the next gun purchase. I’m now shopping for a 34mm tube scope and looking for recommendations...
  4. H

    Rifle Scopes Scope and Max range for mp10 6.5

    Hi there! new to this forum but not new to shooting. 12 years/Marine so i am familiar. While doing research for a scope for my newest toy. M&P 10 as a 6.5 creed. trying to pick a good solid scope and after much reading figured if i was going to spend 2k.. why not 2500.. and so goes the...
  5. rap36case

    1/2MOA goal for AR10 build in 6.5 Creedmoor

    I have read Zediker's book on competitive AR builds. This fall I will be in a gunsmith training program. I shoot at 1100yards now with a bolt 308win and a CZ550 re-barreled to 6.5CM. The AR10 build is a required project. We will do much of the gunsmith work including chambering the barrel. I...
  6. Lowlight

    Area53 Limited Edition Sniper's Hide 308 Variant has Arrived

    Today I was met with a pleasant surprise the Sniper's Hide Limited Edition Area53 matched set arrived. <div id="fb-root"></div> <script>(function(d, s, id) { var js, fjs = d.getElementsByTagName(s)[0]; if (d.getElementById(id)) return; js = d.createElement(s); js.id = id; js.src =...
  7. Tacsnipe73

    AR Deals Thread

    Hey everyone, I know a lot of us build and shoot AR's, and it sure gets expensive. I'm starting this thread in the hopes that we can all continue to contribute by sharing deals we find. Thank you. AIM AR/M16 .223/5.56 NiB 9310 MPI BDG Bolt Carrier Group - NiB BCG $99 + Free Shipping. (I've...
  8. R

    New Armalite AR-10 Build: Ejection and Feeding Problem

    My 'smith finally got all the parts for my Armalite AR-10 in .260 Rem with a Krieger barrel. He ran a couple magazines of ammo through it for function testing (the Giessele trigger needed some tweaking to keep the rifle from doubling) and experienced no problems. So I took it to the range...
  9. sictransitjosh

    Anyone hear of this site or their parts?

    I'm looking to build an AR10 while on somewhat of a budget and came across this site while looking for uppers. It's stupid cheap. Anyone hear of them or have any experience? .308 Caliber AR Upper Assemblies : AK Parts kits, Superb Products
  10. sictransitjosh

    New rifle build: AR10 or M1A? Thoughts?

    Well, I'm looking to build a new rifle, and I'm just asking for opinions/suggestions. It will be a .308, and I've narrowed it down to either an AR-10, or an M1A. I love M1As to begin with, always loved the Sage Mod 0 chassis for it. But, also love the AR-10 platform as well. It will be used for...
  11. D

    My First AR Build

    Im currently working on my first AR 15 build. Im building this gun for medium range shooting and possibly small game. I currently have a CMMG M4 with EOTech 512 that I use for home defense and plinking. The lower I used on this gun was a MAG Tactical Systems lower that I bought at my...
  12. P

    Semi Auto Precision Suggestions

    I'm back with another project, and this time I'm looking to build a semi auto precision rifle, sticking to the lines of a DMR (Designated Marksman Rifle). Before anyone asks, I'm very attached to my 308 Win caliber so yes I'm looking for something in 7.62 NATO/308 Win. I'm NOT looking to build...
  13. kcshooter

    gap ar-10 260 remington loads

    I am about ready to load for my 260. I have 139 grain lapua scenar bullets and h4350 powder with cci br2 primers. The gun is a gap ar-10 with a 1-8.5 twist 22" bartlein barrel. What would be a good starting load? Thank you in advance.
  14. G

    Gunsmithing AR10 Help from the PRO:s

    Got a AR10 SS barrel, standard handguard. Jusrt Recieved the Upper blocks, door pin for the "T", replacement gas tube , pin, AR15 barrel nut wrench, AR10 barrel nut wrench, new FF tube kit from Armalite. Going to Change out the standard handguard to the mew Armalite Al FF tube. Any hints or...
  15. jason_mazzy

    Gunsmithing 1/4 moa out of armalite AR-10? ur input please

    I have been informed through a good military friend, that a friend of his makes custom sniper weapon systems from ar armalite ar 10's. I have spoke to him and he did a bunch for the marines and seals, and says they go 1/4 moa. I was told first it starts with the barrel, about $300 or so and then...
  16. B

    308 208gr AMAX .... AR10

    I am a self professed newb to not only reloading, but my attempt, or lack thereof of long range shooting. 400 yards to me sounds like a long long shot. Anyways, I love the forum and have been able to absorb a ton of information from the site. My first question for the brain trust is will a...
  17. B

    What's the best AR10 stock?

    I have a simple RRA collapsible now; there must be better. Don't want/need the heavy Magpul adjustable, but there must be something better than what's on there now.
  18. P

    AR-10 Accuracy

    For those with AR-10 (.308) experience, what kind of accuracy can be expected if using handloaded quality ammo (top end bullets, Lapua cases, etc.) at ranges from 100 to 600 yards, and maybe 800 yards. I would be using components such as a Geissele trigger and Krieger barrel. I always wanted a...
  19. L

    Considering trading in 700 for AR10... thoughts?

    I currently have a Remington 700 Police in .308... it's had a little work and is sitting on a loaded McMillan Baker Special... it's a great shooter, but I'm thinking about trading it/selling it in favor of an AR10 or LR308. I'm thinking that a 24" heavy barrel should get me out there for...
  20. gol1

    Gunsmithing AR-10 factory parts

    Hi I need your help directing me to a place where I can order parts for an Armaliate AR-10 factory replacment pats like trigger and sear. Thanks
    • gol1
    • Thread
    • ar10 factory parts
    • Replies: 4
    • Forum: The Armory
Top Bottom
Back
Home
Forums
Merch
Alerts