• RIX Storm S3 Thermal Imaging Scope WINNER!

    Thank you to everyone who particpated!

    See the winner

ar15

  1. N

    SOLD ACOG ECOS

    Selling an ACOG ecos. Comes with the bobro mount, rmr optic plate (no rmr, though I’d consider adding a green dot 508t with an arid camo ranger wrap for $375). Has the back up irons. Includes the KRAM 9.0 spacer. Good shape, some like wear on the cerakote. I have had it less than a month, I...
  2. J

    Extractor marks normal?

    This is a 5.56 factory load: frontier 75gr bthp. Does this mark on the brass casing mean that it's having pressure issues? The mark on the right case isn't as bad. I planned on starting to reload for this rifle but if its having weird pressure issues with factory ammo I'll get a new barrel. I...
  3. N

    SOLD LWRC 12.7 DI "Oscar Foxtrot" DI sale or trade

    For sale is an LWRC 12.7 DI pistol with the direct attachment rail. Sub 600 round count from me. I will ship you an ODG SBA brace separately (the latch has been unpinned so you would need a pin). Will come with the cloud defensive rein 2.0 FDE with the tape switch, I will also send it with just...
  4. U

    Index pin undersized by .0002 should it be concerning?

    Just got a barrel with the index pin measuring .12480 Colt TDP spec calls for .1255 +0.000/ -.0005 so .0002 undersized I have another barrel from the same company measuring .12505 should this be concerning at all? The .1248 index pin is not sloppy in my upper receiver mouse hole/index pin slot...
    • URGILOVERR
    • Thread
    • advice or expertise ar15 armorer barrel gunsmithing indexpin tdp technical
    • Replies: 92
    • Forum: The Armory
  5. ychen

    1-8 LVPO or 2-10 MVPO for ar15?

    I built an 18" Wydel lightweight AR15. I want some ideas for rifle scopes. Thank you. I reload 223, so I can shoot bulk 55gr or 75gr boat tail hollow point. I work 5 days a week, live in midtown, and don't have the luxury to hunt (maybe once a year). Usages: Mid-range training (lower cost on...
  6. U

    Need recommendations on tight Fighting .750 gas blocks

    Alright, I have a few DD barrels and their journals mesure .74945-.74960 which is well within the Colt TDP spec and both of my BCM gas blocks are able to slide on very smoothly with no resestince (not sloppy) and I can spin them freely, I’m not bashing BCM I’ll keep both blocks as a spare...
    • URGILOVERR
    • Thread
    • ar15 bcm daniel defense gas block spec tdp
    • Replies: 6
    • Forum: The Armory
  7. K

    Firearms LMT 14.5 complete rifle

    I have an LMT 14.5 complete rifle. Factory Mars L lower, LMT 13.25 MLOK upper, LMT BCG, Radian Charging handle and LMT 14.5 DI barrel with pinned/welded surefire flash hider done by retro arms (best in the game, cant even tell its pinned.) This rifle has only seen about 200 flawless rounds but I...
  8. K

    SOLD COLT LE/CR6920 LOWER

    I have an excellent colt lower that came from a Colt LE6920-FBP2. It has an LMT grip, KAC trigger gaurd and B5 stock. $400 shipped to your FFL.
  9. K

    Firearms Colt LE6920-FBP2 UPPER

    Colt LE6920-FBP2 UPPER. About 200 rounds through it. Its cage code marked. For the complete upper with light setup, irons and Aimpoint H2 for $1000 or $600 for the upper without accessories.
  10. K

    SOLD Colt LE6920-FBP2 Rifle

    I have an excellent condition Colt LE6920-FBP2 rifle. This rifle is the one Colt build for the FBI program. All factory Colt built and cage code marked. Very few rounds through it (200). Will sell just the bare rifle for $1250 shipped to your ffl or the rifle with the aimpoint h2, iron sights...
  11. U

    Upper receiver question

    What is this cut out for above the gas tube hole ?
  12. HandymanHans

    SOLD FCD EPC ODG single dimple

    Brand new FCD EPC ODG single dimple. 70.00 shipped
  13. dcogan@360Precision

    Firearms 360 Precision RECON 16” AR-15 / M4 .223 Wylde ETC Denali

    360 Precision RECON 16” AR-15 / M4 .223 Wylde ETC Denali 360precision.com/recon/ 360 Precision was established in 2019 and is an NFA production manufacturer and custom shop. Every step of our design and manufacturing process is completed in-house in our Warminster, Pennsylvania workshop. The 360...
  14. dcogan@360Precision

    Firearms 360 Precision RECON 16” AR-15 / M4 .223 Wylde Carbon Gray

    360 Precision RECON 16” AR-15 / M4 .223 Wylde Carbon Gray 360precision.com/recon/ 360 Precision was established in 2019 and is an NFA production manufacturer and custom shop. Every step of our design and manufacturing process is completed in-house in our Warminster, Pennsylvania workshop. The...
  15. dcogan@360Precision

    Firearms 360 Precision RECON 16” AR-15 / M4 .223 Wylde ETC Aztec

    360 Precision RECON 16” AR-15 / M4 .223 Wylde ETC Aztec 360precision.com/recon/ 360 Precision was established in 2019 and is an NFA production manufacturer and custom shop. Every step of our design and manufacturing process is completed in-house in our Warminster, Pennsylvania workshop. The 360...
  16. dcogan@360Precision

    Firearms 360 Precision RECON 16” AR-15 / M4 .223 Wylde FDE

    360 Precision RECON 16” AR-15 / M4 .223 Wylde FDE 360precision.com/recon/ 360 Precision was established in 2019 and is an NFA production manufacturer and custom shop. Every step of our design and manufacturing process is completed in-house in our Warminster, Pennsylvania workshop. The 360...
  17. dcogan@360Precision

    Firearms 360 Precision RECON 16” AR-15 / M4 .223 Wylde Anodized

    360 Precision RECON 16” AR-15 / M4 .223 Wylde Anodized 360precision.com/recon/ 360 Precision was established in 2019 and is an NFA production manufacturer and custom shop. Every step of our design and manufacturing process is completed in-house in our Warminster, Pennsylvania workshop. The 360...
  18. L

    SOLD Magpul MBUS Pro Offset Front and Rear Flip-Up Backup Sights, 526-525, Black

    Magpul MBUS Pro Offset Front and Rear Flip-Up Backup Sights, 526-525, Black. What you see picture is what you get, two sights. $100 shipped obo
  19. Crypt_keeper

    SOLD Shepherd Phantom (Japan) 1-6x24 LPVO, 30mm tube, Illum, FFP, T1 BDC ret.

    Selling my practically new Japan-made Shepherd Phantom 1-6x24 LPVO. Mounted, sighted, then put in the safe. Sold the AR it was on so I no longer need it. Extremely rugged with super clear HD glass...especially at this price point. The glass-etched, illuminated, first focal plane T1 BDC...
  20. U

    Good solvents and cleaning procedure for ar15’s?

    Hey all 👋🏽 I was wondering if someone could list the steps of properly cleaning and decreasing an AR 15 in the correct order?(I have a chrome lined barrel and phosphate chrome lined bcg) (Don’t have the money for an ultrasonic cleaner at the moment , but can budget for one in the future so feel...
Top Bottom
Back
Home
Forums
Merch
Alerts