base

  1. S

    20MOA Scope Base manufactures for .22LR

    I'm trying to track down all the scope base manufactures that make slanted bases that will fit on a .22LR. First Burris SIGNATURE™ RINGS make rings with adjustable inserts that will essentially do the same thing as a sloped base. http://www.burrisoptics.com/sigrings.html Also EGW makes sloped...
  2. mtm87tx

    Rifle Scopes Honest scope base opinions

    For the average weekend shooter.. Why does someone need a badger, Seekins, near or other high end scope based vs a egw or something in the 40-50 dollar range? Is it quality? Fitment? Big name? Just like to have "the best"? Enough money that you don't care? I'm looking for a SA 700 base for a...
  3. Dsparil

    Rifle Scopes Picture Request: badger ordnance scope base

    can anyone who hasn't mounted one, take a close up picture of the underside of the badger ordnance scope base. I have a seekins that is TECHNICALLY ambidextrous, but it has flaring only on the right side for right handed individuals.
  4. insectguy

    TRG 22 scope base question

    Last week at RiflesOnly, I found my Sako base would not allow the spent shells to reliably eject. The shells would hit on the quick release mechanism and bounce back into the chamber. (I have the base with only two rings, not the three-ring version.) I wound up turning the base backwards, so...
  5. Dsparil

    Gunsmithing Installing seekins base

    is there a proper way to do this? or just simply screw it in? (ETA: looking for best results)
  6. Msprink05

    Rifle Scopes Ordering rings and base today need help!!

    Im ordering a base and rings today for a new savage model 10 308. Ive almost decided to call midway and order the egw base and burris xtr rings. I just cant get over how big and ugly the xtr's are. Does anybody have any other suggestions for me? My cash limit is $150 Thanks in adavance Matt.
  7. S

    Base for Rem 504?

    Looking for a good one piece base for a 504. Any suggestions?
  8. R

    Remington 581 scope base

    Does anyone know of someone or somewhere a picatinny rail for a 581/541 with some moa is sold? or could anyone out there possibly make one? please pm me if you can make one. thanks any info appreciated.
  9. turbosa22c

    Rifle Scopes what ring and base combination is this?

    every ones seen this picture before so.. i know this is a m24 used by the airforce. but i want to know what scope ring and base combination this is. im assuming thats a leupold w/40mm obj. any info would be much appreciated.
  10. J

    Rifle Scopes What base should I go with?

    So here's my current projected setup... Remington 700P Sightron SIII 6-24x Seekins 30mm Medium rings Harris 6-9 swivel/notched Now... what base should I go with? I'm utterly confused as to which ones I should be looking at. Should I just go with the Seekins base? I think it's a 1 piece...
  11. He Shoot Me

    Rifle Scopes Mounting a Picatinny base

    Okay, yesterday I got the last piece of the puzzle (Scope rings) Got all fired-up and mounted my scope. After putting it all together, staring at it, and then spending 7 1/2 minutes with it alone in the Whack Shack, I decided to clean-up....check that....I was ordered to clean-up the living...
  12. J

    Rifle Scopes What base and rings to go with?

    This is for my first precision rifle so I'm very excited! What I have planned is... Remington 700P $900 shipped Sightron SIII 6-24x50mm mil-dot $810 shipped So uhh... what base/rings should I be looking at? The only other stuff I'm aware of is getting a stock pack and a cleaning rod. (I'm...
  13. M

    Rings and Base for Sako Quad Build

    What rings and Bases should I use? I know USO makes some (I think) Who else makes some good ones? I want this to come out well, but I don't want to have to spend tons on rings and base if I don't have to.
  14. M

    Gunsmithing Remington 700 scope base mounting point stripped?

    I just received a remington model 700 sa that has the front most mounting point stripped out. I installed a Leupold two piece base and the rear screw is tight. I put some locktite on and it seems to be holding fine after about 20 rounds. Would you guys leave it alone or have it repaired? What...
    • mildotdave
    • Thread
    • 700 base mounting point remington scope stripped
    • Replies: 4
    • Forum: The Armory
  15. B

    Rifle Scopes Aimpoint on an HK-93. Which base?

    Looking to mount an Aimpoint on a Vector HK-93 knock off. Cheaper than dirt has got factory claw-mount bases for around $150. But for only $70 they offer a Leapers claw-mount which already has a Picatinny rail. I've never dealt with Leaper's products. Anybody have any experience with their...
  16. L

    Sako M995 (TRG-S) .338LM: poor man's base rifle?

    Well guys I found a M995 in .338LM and was wondering if it might be a decent option to consider as an entry rig/build base. From some previous posts it looks like restocking might be an issue. Seems McMillan has figured out the lower metal, so it can be done. Also have a call into McRee's as a...
  17. P

    Gunsmithing Dimensions of scope base?

    I got my Bushnell 4200 today and need a mount and rings. I have some Weaver stock and a mill, and I thought about making a base. What I don't know is how long the bases are and how many thousandths the slope would need to be to get 15moa elevation built in. Does anyone have the specs? Is this...
  18. RobG

    Rifle Scopes Question on zeroing canted base

    Couldn't find anything by searching so, with a 20 moa base should I go down 20 moa on the scope before shooting? Going out to zero/test in the a.m. and do not want to waste too many rounds trying to zero. Thanks
  19. He Shoot Me

    Rifle Scopes Need Scope Base & Rings

    Can any of you tell me the best place/brand to buy a picatinny base and rings for my Remi 700 short action (SPS Varmint 300wsm). I really like those Burris XTR rings, but I'm not sure which base to buy??? I noticed some of them are over a $100, do I really need to spend that much on the Base? I...
  20. C

    Rifle Scopes Howa 1500 1-piece base

    I have had a rough time finding a one-piece picatinny style base for my Howa 1500 .223 Midway has the long action ones made by EGW but no short action ones. Does anyone know of anywhere else they can be ordered? thanks
Top Bottom
Back
Home
Forums
Merch
Alerts