dpms

  1. THE SENTINEL

    DPMS SASS RIFLE I need a review

    I am thinking of buying this rifle.all I have found on review search is how pretty it looks.I need a review about this rifle.
  2. C

    Gunsmithing Armalite vs DPMS

    I am begining to put together an AR-10 and I need some advice! I have an Armalite lower and bolt! I like the DPMS 18" barrel and need to know if it will match up if I try to configure it that way???
  3. C

    Armalite or DPMS SASS?

    I'm planning on buying a SASS, but can't decide which one to purchase. Does anybody have either the Armalite or DPMS version, and if so, how do they perform? Quality? I noticed that the DPMS version has an 18" barrel as compared to the Armalite's 20" barrel. Does the shorter barrel give a...
  4. S

    Gunsmithing Muzzle Brake for DPMS SASS

    Could anyone suggest a good muzzle brake for a DPMS SASS 308 with a TPI count of 5/8 x 24. Mine jumps around like a long tail cat in a room full of rocking chairs when it discharges.....even off the bipod. Frankly I'm tired of it. You can't load the bipod enough to keep it down on the deck and...
  5. H

    DPMS Sweet 16 Accuracy?

    Looking for feedback on a Sweet 16. I have a 24" Shaw barreled AR that is a tack driver. I am interested in something just as accurate, but with a shorter barrel. Is 16" too short? Does anyone have experience with one? What kind of accuracy do you get? Looking for something to shoot...
  6. 7mmRM

    New toy. DPMS SASS

    Scooped up this beast from a member here. First venture into a precision gas 308. Added a Magpul PRS, different grip, NF Unimount, and topped it off with a NXS 3.5-15x50 R1.
  7. V

    Armalite AR-10 or DPMS LR-308?

    I am looking to build an accurized AR-10 type rifle in .260 Remington. Should I build it on the Armalite AR-10 platform or the DPMS platform. I know that the two will not interchange mags but is one really better than the other? I noticed that GAP builds their precision AR-10 on both platforms...
  8. RidgeRebel

    Gunsmithing DPMS 308 gas issues?

    Somebody posted a similar post on the rifle forum but I have the same issue. I was out shooting my DPMS 308 LR today it is an 18in barrel. I've shot less than 100 rounds through it and I bought it new. It has shot great until today. I shot about 10 rounds and then it started short stroking and...
  9. smith934

    DPMS LR308 - Initial Sight In & Break In ?

    I bought a new DPMS LR308 and I'm going to the range this weekend. I have a large quantity of 7.62 surplus ammo (Port, Hirtenberger and Radway Green) and am wondering if it would be ok to use it for the initial sight in and for barrel break in. Any recomendations would be appreciated.
  10. C

    Gunsmithing dpms lr-308 triggers

    can anyone tell me what triggers will fit an lr-308 lower and possibly recommend one. thx steve
  11. Suasponte

    308 Sub-sonic loads out of a 308 DPMS semi-auto

    Finally got together with my buddy to try the loads I made up for him for his 308 DMPS, with a Gem tech, 11.25:12 twist, Barrel length was 16". First 3 rounds was fired from a clean bore without the can to check for tumblers. They all stabilized and was within the velocity range we wanted...
  12. RidgeRebel

    DPMS LR 308 build up suggestions?

    Hey guys I just got an 18" bull DPMS 308 and I want to bulid it up for the best accuracy possible. I had a RRA LAR 308 on order but I couldn't pass this deal up so I canceled the RR. Hopefuly that was not a bad decision. The DPMS seems pretty solid, it just needs some upgrades which brings my...
  13. P

    Gunsmithing DD 12.0 on DPMS SASS?

    Got a possible good deal on this rail, but need to know if it will fit a DPMS SASS 308?
  14. beenjammin

    Rifle Scopes Best 1 piece scope mount for a GAP DPMS LR308

    I have a badger riser rail with some m40A30 rings on it at the moment and there is not enough clearence for lens covers left on a 50mm obj. I would like a 1 piece set up like the larue, but doe the larue have any MOA built in to the mount? also would an AI picatinny mount work? or armalite 1...
  15. Suasponte

    Subsonic Load for DPMS 308

    I have looked at all the info I have time to look at! I see Trail boss is good for case capacity and is not position sensitive. I have every powder at my disposal and primers too. Rifle is DPMS AR10 16" barrel 1-9 twist with a Gemtech can. Would like to use 150gr 30-30's, 180gr PSP's and...
  16. mattsnuked

    Gunsmithing DPMS LR308 feeding problems

    Well I have had my DPMS LR308 for a week now and have taken it out to the range twice. I like the rifle BUT I have an issue with it. On only the 3rd and 2nd to last round in the mags when the bolt goes to cycle it skips over the head of the round, starts feeding the round by grabbing the body...
  17. K

    Gunsmithing Smith to assemble DPMS LR308 bbls

    I have parts to build up several DPMS LR308s and am in need of a smith to turn the bbls, chamber, drill the gas port, install the bbl extension, and all related headspacing. I know GAP is not taking work like this until August and imagine there are other smiths out there that are used to doing...
    • krecon1
    • Thread
    • assemble bbls dpms lr308 smith
    • Replies: 1
    • Forum: The Armory
  18. Am180man

    Will a DPMS 308 carrier assembly work in an AR-10?

    I was told that the bolt carrier assembly for DPMS' 308 will work in an Armalite AR-10. Is this correct? What about Knights SR-25 carrier assembly....will that work int he Armalite as well? Steve
  19. trigger time

    Who makes a good trigger for AR-10 DPMS

    Before I get slammed, yes I searched and no I didn't find anything. Looking for a good single stage trigger for an DPMS AR-10. Thanks in advance, Tony
  20. S

    Gunsmithing dpms chambering issue

    my dpms lr 308 rifle does not go into full battery on occasion. when i pull the charging handle to eject the round to inspect it, there is a scratch mark on the side of the case. this happens with the reloads and commercial rounds. i have been told to use a finish reamer and it will clear my...
Top Bottom
Back
Home
Forums
Merch
Alerts