• Win a RIX Storm S3 Thermal Imaging Scope!

    To enter, all you need to do is add an image of yourself at the range below!

    Join the contest

gap

  1. rc2125

    Gunsmithing Gap bedded FN SPR or SPR A3G

    For those folks that might have an FN SPR, and that have maybe sent it to GAP to have it bedded or it's an A3G model....... is there any bedding material foward of the recoil lug ("pad" under first part of barrel)? From what I gather'd, they do the bed jobs on the A3G models. I've read about...
  2. P

    Fieldcraft First and second attempt at GAP camo.

    Look alright to you guys? I know I don't really need to post twice on the board, but it may help out some guys that paint their own rigs who don't normally look in the rimfire section. http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1164010#Post1164010
  3. KYS

    Suppressors New toy. GAP rifle suppressed!

    Well I sent in my GAP Crusader for a little alteration. I was inspired by the Gladius Rifle that Lowlight has given so many demonstrations with. I sent in my Crusader to have the barrel shortened and muzzle device installed so that I could put my AAC 762SD on the end of it. At the time I did not...
    • KYS
    • Thread
    • gap rifle suppressed toy
    • Replies: 27
    • Forum: The Armory
  4. tpe187

    Rifle Scopes $2500 - Which scope for .308 GAP Crusader?

    Hello all, I've lurked for a while and finally decided to get into the game. I just got a used GAP crusader in .308 and I'm looking to get some quality glass for it. I'm just looking to have a good quality precision rifle setup. A range with anything over 600yds is a long drive for me, so...
  5. mtm87tx

    Anything a GAP AR10 cant do my SPR can?

    heres my problem, i have a FN SPR that is very accurate and a wonderful rifle. problem: 4 round mags. i need a 10 round mag and i don't want to spend 500 to accomplish this. im not a big competitive shooter but i do run some matches, however most of my time is spent hog hunting or target...
  6. trpr154

    Gap (Mcmillan stock painting)

    I talked with GAP today about painting a Mcmillan stock for me. They were glad to do it, and the price seemed reasonalble. I forgot to ask them about their painting process. I know a lot of folks here on the Hide have GAP painted stocks/rifles. 1. How well are they holding up? 2. What...
  7. mr_hurricane

    GAP M40A3 DROP TEST RESULTS

    Hello All, Thought I'd share this story. 2 Weeks ago I recieved my first real precision rifle. I had thought about having one made by a real gunsmith for sometime, and eventually decided on an M40A3 as I am an former Marine... why not right. After about a month of research I decide that this...
  8. C

    Need Loads for GAP 338 Lapua Mag

    Does anyone have any Loads that will shoot consistant 1/2" MOA groups. I am currently using 250gr and 300gr sierra mks while i am waiting on berger to get their 300gr vlds kicked out. I would appriciate all the help i can get. thanks
  9. KNIGHT11B4

    Question About GAP Templar Action???

    Gents- Have a new GAP coming my way very shortly with a Templar action. Wondering if that Templar action will accept a rail extension. The rail extension simply goes over the standard moa base on an M24 and extends the rail over the sides and down the barrel allowing the use of items such as a...
  10. fastford

    what twist for my 338 lapua GAP build?

    what has everone been using? I plan to run either the sierra or lapua 300gr bullets, with a AAC titan suppressor, your thoughts?
  11. SingleShot85

    Gunsmithing BIG thanks to the guys at GAP

    Tracy, Kerry, and George all over delivered I Called: (4-23-09)I have PSS stock and Surgeon DBM can you fix me up They Answered: Yes 4-6 weeks They Called: (4-29-09)Your stock is ready to ROCK and is shipping out. I Answered: SWEET!!!! Thanks GA Precision *** I know, I'm preaching to the choir
  12. J

    GAP Color combos

    Does anyone have a picture of an AICS with OD skins with a GAP Olive painted barrel and action Or any color combo sitting in an AICS OD. If you could post them or e-mail them to me I would appreciate it. Jack
  13. NorCal Vu

    GAP 243win Loads

    Hey guys, For those of you with GAP built 243s..can you give me your ogive to lands measurements with a 115 DTAC? + What loads are you guys running? Thanks for the help, Vu
  14. psinclair

    Range Report GAP Non-typical .308 report

    Just got back from the range...weather sucked but I just coudnt wait. Wind was 20mph coming in from 2 oclock. Got it on paper then shot 5 at 100M. That looked good so I put one up at 200M and fired 10. That looked even better. Thanks goes to "Seuss" for selling this rifle to me. (Off the Hide)...
  15. KYS

    GAP built Badger rifles - triplets :)

    Well I thought I would post my pics of my 3 most current builds. I was lucky and got in on the Valkyrie build in 260 Remington. And then near the delivery date George posted one for sale in 6.5x47 and I scooped it up as well. He did the 260 in Desert Flectarn camo and I spec'd the AAC suppressor...
  16. C

    Finally ordered my GAP!

    Got my motorcycle sold and called the next day to order a rifle built. Should be done right around the time I return from Afghanistan. So it worked out perfect. Im gonna pay off the rifle a save for a U.S. Optics SN3 and everything shoulkd be done in time for me to start putting rounds down as...
  17. J

    GAP 7000 Action

    I've got a Crusader clone built on a GAP 7000 action. Does the 7000 have the same footprint as a Rem 700 ? My rifle is in a M40A1 stock and I'm looking to trade for or purchase an A5 , thus my question. Thanks guys, Ken
  18. A

    Fair price for GAP?

    Is it ok to ask a question about how much my rifle maybe worth that i am thinking of selling? I won't post any details or pics without confirmation. Thanks.
  19. A10XRIFLE

    GAP Templar action, Gen 2

    OK the Gen 2 Templar action is finally out and in stock. Glen (Phoenix Machine) got me the first one at the first of the year but I hate to talk about stuff until I have it ready to offer. There are two changes: First, The primary extraction is increased by 35% this means that upon...
  20. Blaster4

    the saga continues with my GAP built 6.5 Creedmoor

    It's a week out from the Hide Cup and I figure I should finally clean that new 6.5 Creedmoor barrel that Moon twisted up right before the last Bash. This barrel had under 300 rounds through it and it was a hammer...no break in no cleaning for any of those shots. Cleaning began and ended rather...
Top Bottom
Back
Home
Forums
Merch
Alerts