lapua

  1. O

    Semi Auto .338 Lapua -RND 2000 v.s. Vigilance VR1

    I am hoping that some one here has experience with these rifles, or knows of some first hand accounts in regards to their perfomance. I found this website from a search online, but cannot find my way back to the thread in which a "jimmy" something posted pictures of an RND 2000, but no actual...
  2. R

    Gunsmithing AI 338 Lapua Magazine modification

    Can the AI 338 Lapua Magnum magazine be modified to feed a 338 RUM? If so how and who does such work?
    • ratton
    • Thread
    • 338 lapua magazine modification
    • Replies: 0
    • Forum: The Armory
  3. Tip em over

    6 X 47 Lapua Load info

    Anybody running 115gr DTac's in their rifle? Looking for any input on powder/charge weights that's working. Thanks
  4. Ariel

    Need info on 6.5 x 47 lapua!

    Folks, I’m just about ready to move up a nudge and purchase my first custom precision rifle. Most of my experience has been with the 223 caliber rifles, but it’s time to move up in caliber. At first my first choice was some type of 308 configurations, but recently I've grown an interest in the...
  5. T

    GAP M2008 Lapua Mag

    Well, I decided that I would share some of my findings regarding my GAP M2008 Lapua Mag. First off, specs and a picture. Specs: M2008 Lapua Action w/20 MOA base 28" Bartlein 1-9.7" twist barrel, MTU contour Badger FTE Badger Rings NF 5.5-22x50 w/NP-R1 Remington 40X trigger AICS 2.0 LA w/AIAW...
  6. P

    Range Report 338 lapua velocity

    I have been loading 97 gr of h1000 shooting 300gr sierra in lapua brass. My velocity is around 2950fps. Accuracy is ok but I have slight ejector marks. should i back down the load? Is anyone else using h1000 in thier 338 lapua
  7. X

    338 Lapua Velocities

    How hard do u guys run yours, reason is can the rem700 run just as hard as some of the larger actions. I am doing around 3100 to 3150 from my 250 grns and i am running 225s at around 3300 from 26 inch bbls with 10 twist.
  8. X

    Lapua capacity

    Anyone have the water capacity for lapua brand brass as compared to norma,hornandy, and jamison brass. Thanks.
  9. esromvre

    7MM Mag / Lapua brass

    any interest in this stough.. looking at $255.00 a 100 Note this is NEW IN UNOPENED Box only 2 boxes
  10. Hasgun Willtravel

    6.5x47Lapua reloading help/SAMMI Specs

    Does anyone have one of those nifty illustrations of the SAAMI specs for the 6.5x47 Lapua. I think I have a shoulder issue, I am getting a stiff bolt close, and the bolt is "pop" when I lift the bolt, just past the begining of the cam. I am using Forster Dies, and have it screwed all the way...
  11. T

    New 338 Lapua

    Remington 700 Long Action HS PSS Stock HS bottom metal and mag Rock 1-9.4 barrel Ops Brake Tub Bolt
  12. 500grains

    1500 yd 338 Lapua OEM rifle

    Is there any OEM 338 Lapua rifle that would be worth a crap at 1500 yds? Or are we talking full custom rig for the kind of consistency necessary?
  13. T

    338 Lapua Reloading Components

    Shooters, this is a non-aligned professional bump for CheyTac's new 338 Lapua brass, made by Jamison International. I've tested this brass and saw some of the high pressure testing done on these cases. They are superior to anything out there. Including Lapua's brass. Jamison has a solid handle...
  14. T

    CheyTac 338 Lapua Brass

    Shooters, this is a non-aligned professional bump for CheyTac's new 338 Lapua brass, made by Jamison International. I've tested this brass and saw some of the high pressure testing done on these cases. They are superior to anything out there. Including Lapua's brass. Jamison has a solid...
  15. G

    Which hand prime tool for .338 Lapua?

    Hi, Just looking for some ideas on what works for a hand priming tool to handle .338LM. If I need a special bushing for the tool, lemme know. I've used my neighbors RCBS hand primer on 308's when my dillon's primer assembly broke, but I'm not sure if that will work on .338LM's. Thanks...
    • Guest
    • Thread
    • 338 hand lapua prime tool
    • Replies: 8
    • Forum: Reloading Depot
  16. R

    Range Report Lapua Scenar 155gr BC transposed with 167gr Scenar

    The thread Lapua Scenar 155gr, wrong BC? almost figured that out. My measurements indicate the 167gr doesn't have a lower BC than the 155gr - Lop-wah just transposed the numbers. The 470 BC claimed for the 167 gr is right on for the 155. The 155 Scenar is a great bullet, but it's not magic...
  17. smith934

    Lapua Brass Question

    Does Lapua still make 300 WM Brass? Googled for it and can't find any. Sugestions? How does Norma brass compare with Lapua if Lapua no longer available? Thanks
  18. G

    .338 lapua horizontal impact movement

    Have run into a problem with my m-96 windrunner,.338 lapua barrel. 91.4 R-25, 250 Gn SMK, seated .060 off rifling. Vertical impact is dead on horizintal will wander up to 3" left and right. Wondering if it is a muzzle brake problem. Brake has a id. of .504, 3 large ports on L & R sides. Is it...
  19. 3

    Trying to find the thread on Lapua 155 Scenars

    I am trying to find the thread that questioned if the 155 Scenar really has a B.C. of .508. I tried to search for it without any luck. Any help would be appreciated.
  20. mattmcg

    Any issues reloading 338 Lapua on a Forster Co-Ax?

    Thinking about adding a 338 Lapua rifle to the mix and am wondering if there are any issues with reloading 338 Lapua on a Forster Co-Ax press. I'd probably go with the Redding Type S full length resizer die and the competition bullet seating die and was wondering if I'd have any issues with it...
Top Bottom
Back
Home
Forums
Merch
Alerts