neck

  1. N

    neck sizing in an ar15

    im looking at buying a match grade ar barrel and most come with a matched bolt. im being told by some vetern shooters i can neck size with that setup.is there any more opinions on this logic.
  2. T

    Lee neck die for .308

    I've had good results from the Lee Collet neck sizer die with my .22-250 I'd like to try one for the .308 (Rem700PSS) but it seems everyone is out of stock Your experience with this die in a .308 and a source for the die (rather not buy the deluxe 2 and 3 die sets) would be much appreciated TBC
  3. D

    .223 optimal neck sizer bushing and powder?

    I got myself a Rock River varmint A4 and am going to start loading for it. Wondering what the best neck sizer bushing size is for lapua brass. Loading sierra blitzking bullets. Also wondering what everyone uses for powder. I was accidentely sent 8lbs of benchmark (no returns on powder) so I was...
  4. Superjet06

    For you that neck size only

    Do you change your load with new brass from your load you've fire formed your brass with? With my new remington 5R, I accidently found my dream load first time out with new brass, .250-.400moa cofirmed with 30 rounds. Is it safe to assume I should just neck size and load up as the exact same as...
  5. V

    7WSM neck Dia.

    I need to know what the neck diameter is for the 7WSM I need to order a bushing or two and I dont have any rounds to measure. Please help I need to order soon to get in time for a match.
  6. sniper7mm

    How much of the neck to size??

    When using bushing style neck size dies how much of the neck are you all sizing, all of it just to the shoulder? Or just a portion of the neck?
  7. K

    Full-length resizing or neck only?

    Sorry, but I'm full of questions on reloading...but you guys have really given me some great insight! For match chamber bolt guns (and keeping the brass separate for each). Do you like to full length resize or just neck size your brass? I'm FL sizing for my autos. This is primarily for .308...
  8. S

    408 CT: neck tension / crimping.

    What neck tension are you using on bullets W/O a crimp band I.E. RMB jacketed. Do you crimp bullets with a band? The TTI ammo I'm using has a slight crimp, I have just about exhausted it and ready to reload, have bullets with and W/O band, rifle EDM WR.
  9. C

    Using a FL Die to Neck Size

    I have heard and read several opinions on this topic, I would like to get some input from members who have done this, would also like to know if it is a recommended procedure, or should I just buy a Neck Sizer die for the rifle. I will only be firing the brass in 1 rifle. Remington 700P 300WM...
  10. cypriss32

    Neck up 243 or Neck down 7mm-08 for 260win brass

    Looking to stick with win brass dunno why..... Would you recomend necking up 243 or necking down 7mm-08? Never had to form brass before.
  11. L

    Lapua 243 neck thickness

    Can someone tell me the neck thickness of the Lapua 243 brass? Thank you
  12. selfbowhunter

    308 Neck thickness questions

    i need some brass for a couple of projects with .015 or more neck thickness. the federal brass i have measured is .015 but i hear it is too soft to get many loads from. is there any other brass with .015 or thicker necks that is more durable? chuck
  13. B

    lee collet neck sizer

    Anybody use the collet neck sizer die? I tried one out last night and I had to fiddle with it a lot to get the neck tension tight enough to hold a bullet without being able to pull it out by hand, even though they measured the same as my FL sized brass which I believe is .305 ID.
  14. S

    6.5CM neck sizing die??

    IS there a neck sizing die for the 6.5 creedmoor? I cant find one. I have the hornady die set but it doesnt list or show just a neck die. My rifle is shooting really well with full length sizing, but i just wonder how much better it would shoot with just sizing the necks. Anyone know anything i...
  15. Jrb572

    Question about Case neck and Concentricity Gauges

    I have just watched the redding advanced hand loading video. They had a Redding case neck gauge and it looked like a Sinclair concentricity gauge. MY question are booth necessary? I could be wrong because i don't know but it looks like the concentricity gauge will do the same thing the case neck...
  16. S

    Redding Type S neck bushing die...lube needed?

    When using the Redding Type S Neck Bushing Die, is it recommended practice to lube the cases? In the Redding instructions they state that if you have the Titanium Nitride bushings, lube is not required. It doesn't state anything about the heat treated steel bushings that I use, which leads me...
  17. E

    Oil on the Neck

    I have been told that you have to be careful getting oil on the neck of a round that you are resizing, that this could cause the die to deform the neck. But I have also seen here where others have suggested oilling the whole round before resizing? I know that using a spray would be much faster...
  18. U

    Any experience with CEDLoad force neck tension

    Has anyone used a CED Load Force 250 or similar load cell systems to determine bullet seating force and neck condition. Did sorting ammunition with identical seating values enhance performance and ES or POI, if so to what extent? I anneal rounds after each five firings but would like to control...
  19. K

    neck sizer die....important?

    I'm going to try my hand at rifle handloads soon (done pistol), and have a ton of .243 once fired through my Win.70 The dies came in for the 243 the other day, and happen to be a redding set with only two dies....no neck sizer. I called the vendor, and he explained I do not need the neck sizer...
  20. S

    7 RUM Neck Bushings

    Setting up for 7RUM loads, rifle not yet finished. Anyone loading 7 RUM, Rem Cases, Redding Comp Dies. I need the correct bushing sizes . Berger 180's. No luck in search Thanks Guys
Top Bottom
Back
Home
Forums
Merch
Alerts