problem

  1. 81sfo

    Gunsmithing Anyone ever seen had problem Rem700?

    I bought a New 308 rem700 action,some months ago here on the hide,dont even remeber from who,but i just recieved my barreld action from RWS and the lip, that is on the bolt way that keeps the follower from coming thru into the top of the action,is missing.Im no way blaming RWS on this ,i truly...
  2. Surgeon_Shooter

    Loading problem! BORE TECH solids

    Fellas ive tried all that i know to do as far as loads with this bullet maybe yall can help. I have the bore tech 245grn v3 match in .338. My rifle is a surgeon remedy with a 28.5 krieger and it has a 1:9.5 twist rate. How far am i supposed to seat off the lands?????? I heard it was .070 but i...
  3. S

    Problem with Stiller Tac 300 action

    Hi I have a problem with my Stiller Tac 300 action The problem is with crated primers. The caliber is 300 WinMag Have changed the original firing pin spring with a harder Tubbs speed> lock firing pin spring and measured the dia of the firing pin hole in the bolt and as well measured the dia of...
  4. M

    Gunsmithing Ithaca 37 pump problem

    I have an Ithaca 37 DSPS that won't cycle. I can put one in the tube and 6 in the mag. when I fire the first round and cycle the slide the next round falls out the bottom of the gun. WTF's happening. Will a part fix this.
  5. J

    Rifle Scopes turret problem with scope

    I have an older SS 10 X 42 that was purchased from a large online retailer. Unfortunately, neither they nor the manufacturer will warranty the scope given the transition period when Tasco was going belly up. The turret index rings turn and have turned from day one. Does anyone have an idea...
  6. HOOFER

    Suppressors kimber 1911s whats the problem

    i wanna know what peoples beef with kimber is. ive seen it a lot lately and wanna know why a lot of people think they are garbage. cheap pistols. everyone says they are crappy and i dont understand where they get this, lapd swat, marine force recon both use kimber 1911s and im sure other...
  7. Known

    Gunsmithing Feeding problem with Badger M5 trigger guard

    Hi, I'm having an occasional feeding problem with the Badger M5 setup. I installed it using the pillars supplied with the kit. The rifle is a .308 chambered with a Palma reamer. Receiver is a factory Remington 700 Left Handed short action. Brass is brand new Lapua. Bullets are 155 scenars...
    • Known
    • Thread
    • badger feeding guard problem trigger
    • Replies: 2
    • Forum: The Armory
  8. P

    Gunsmithing Bolt Sticking Problem

    Just finished my Remmy 700 build the other day and Took it out shooting. After Fireing a round the bolt will stick at the very top when opening. At first I thought it could be the Sako extractor but i did some work on that and it didnt seem to help. Ive used several diffrent loads with it ( By...
  9. AZgotAmmo

    Light Primer Strike Problem

    I don't know if i should've posted this in the reload forum or here but here it is. Was wondering if you guys could help me diagnose an issue... I was out at the range today shooting lake city through my .308. 2 out of the twenty rounds of lake city i shot.. i pull the trigger and just hear...
  10. offroadr1

    Gunsmithing do i have a firing pin problem?

    today was the 4th time i have had a misfire from my rifle in less that 80 rounds. the rifle is a FN SPR A2. i bought it used with roughly 600 through it. all the loads have been my handloads. all cci br2 primers. the first 3 were in win brass and the one today was in virgin lapua. also with the...
  11. P

    Suppressors Ultradot Matchdot problem

    I have a couple of UltraDot Matchdots on my Ruger MkII and a Springfield .45 that I use for Bullseye matches. I have an annoying problem. The polarizing filter will move during the rapid fire and timed fire stages. Is there a cure other than tape or a rubber band? Is there a step I missed on...
  12. Maggot

    Maggie’s The Chinese problem

    Don't know if this is just a sick coincidence but.... 2007 - Chinese year of the Chicken - bird flu pandemic devastates parts of Asia 2008 - Chinese year of the Horse - equine influenza decimates Australian racing 2009 - Chinese year of the Pig - swine flu pandemic kills hundreds of people...
  13. Jrb572

    Gunsmithing Do I have a bedding problem?

    OK I should have saved targets. My rifle is on a B&C stock. Unbedded it held under .5 and better. I bedded the rifle and now I can not get it to hold that to save my life. I know its not the barrel it was installed by G.A. precision. There is nothing touching front or sides of recoil lug. Rear...
  14. alien319

    Gunsmithing New McM A4 with SPS-V, trigger housing problem?

    Hey guys, I just received my new McM A4 stock and my new SPS Varmint in .308 win. I am having trouble with the trigger housing fitting into the stock. Is this due to the new X-Mark Pro Trigger? Do I need to file or sand down the trigger housing channel to get it to fit? Please help with this...
    • alien319
    • Thread
    • housing mcm problem spsv trigger
    • Replies: 5
    • Forum: The Armory
  15. jroberts

    Suppressors thread on supressor problem

    whenever i put my thread on supressor on my rifle and shoot a match or just get it hot it tends to want to get locked on the barrel..i keep the threads greased upbut it dosent seem to matter,,,i hate having to crack it in between events because im worried about changing my p.o.i...anybody out...
  16. A

    Gunsmithing AR-10 Krieger Problem

    I had an upper built for my AR-10 awhile ago with a SS Krieger barrel. Just got it to the range and have some issues. The bolt does not go to battery on some ammo. It seems to like Federal Match and M118 LR more than most. The others get stuck in the chamber. Occasionally the Fed and M118 stick...
  17. 87Burban

    AR-10 didn't ship with two mags - PROBLEM SOLVED

    Kids, Got my AR-10 from Whittakers today. Came with a 10 rd mag, but no 20? Armalite ships with one of each per their web page. I will call Whittakers tomorrow and inquire about this. Has this happened to anyone else? <span style="color: #CC0000"> </span> <span style="color...
  18. D

    Problem with dented necks

    A lot of the 6.8 spc silver slate brass I bought has some severe dents on the neck. Even some of the Lapua brass I have for other calibers has the same problem. The problem is I have no way to fix them with the equipment I have. I use Redding competition die sets. If you are not familiary with...
  19. jamesZ71

    Rifle Scopes problem with new base and rings

    just got my new egw 20moa base and burris extreme rings,mounted them on my savage 10 and the are not lining up right,bore sighted my rifle and the rings are twisting the scope off to the right.so what im wanting to know is there some thing wrong with the rings or base,or am i doing something wrong
  20. Mr.Kirk

    Gunsmithing 6.5x47 Firing pin problem

    I recently wrapped up a new 6.5x47 Lapua using a surgeon action. I purchased the s/a repeater ideal for a basic 308 build and already having the correct bolt face. I constantly had hot loads while developing a round for this rifle, even when using known light loads from another rifle. I was...
Top Bottom
Back
Home
Forums
Merch
Alerts