problems

  1. mtm87tx

    Savage MKii problems firing

    just took the mkII to the range and it only fired 1 or 2 out of 5 rounds using Fed 510, walmart Xpert and remington standard target ammo. the unfired rounds had marks on them but not as deep as the ones that went off. any opinions on why im having issues? gun has about 2k through it and less...
  2. T

    AR trigger problems

    Interesting thing happened to me today that I've never experienced before. I changed out the stock on my AR-15 from an A2 to a Magpul UBR stock, and changed the buffer to a dpms heavy buffer and CS flatwire spring. Until this change I never had any trigger problems. Since the change, I get...
  3. Mgordon

    Gunsmithing Benelli M1 Super 90 reliablity problems

    I have Benelli M1 Super 90 12 Ga that does not seem to function with anything less than 3 1/4 Dram loads. I'm getting FTE, FTF I might be new to the Benelli Semi auto game, but this does not seem right. I think it should function with just about any 12 Ga load for the most part. I took the...
  4. jacq220

    Gunsmithing 870 problems need help

    took apart my 870... cleaned... put it back together... wouldnt feed rounds... took it apart again found nothing differant made sure all the parts were present and where they were supposed to be using a brownells schematic... put it back together... now the front trigger pin wont slide through...
  5. R

    Problems with RL25 in 338LM?

    Just started working up loads for my AI AWSM at the beginning of the year. I bought both H4831SC and RL25. Started with the H4831SC and have had great results. Consistent velocities and low SD for accuracy groups. No load tested over MOA with better groups sub 1/2 and the best load at .350"...
  6. S

    Suppressors XD45 with 200gr LSWC feed problems

    I'm having problems with using a 200 gr LSWC in my XD45. I've only shot 100 rounds of these that I loaded for my XD45, but I have had more hangups and FTF than any of the thousands of 9mm I have ever loaded. Seems that with the majority of the hangups, the little squarish egdge would have a...
  7. D

    Range Report Confusing .204 ruger problems

    I have a brand new DPMS .204 ruger and I am having some major problems at the range. after getting the scope mounted, I took it to the range to do some informal adjustments. Just enough to hit coyotes and such at 100-200 yards. I couldn't hit paper at 100 yards, so I moved closer. I still...
  8. Jimmy2Times

    Rifle Scopes Problems, problems. New scope.

    OK, so basically I'm rebuilding my Savage FP 10. I replaced my Leupold Vari X II Tactical with a MK IV. I used an EGW 25 MOA base and Leupold MK IV medium (the lowest available in the MK IV line) rings. I have a B&C stock on the way to replace my old SSS stock. Anyway, here's the problem- I like...
  9. bayou06

    Problems with .223 OAL - Driving Me Nuts.

    BLUF: I am having inconsistencies in my .223 OAL while loading some 55 FMJBT and it’s driving me nuts. First, some background, I am new to rifle and precision reloading (I’ve reloaded pistol for many years). After a lot of research and study, I started reloading for my little AR-15 carbine...
  10. A

    AICS + REM 700 PSS = Feeding problems from the mag

    Hello, I have and AICS 1.5 on a remington 700 PSS. However, testing it out I noticed that feeding from the magazine results in my bullets being scraped along the feeding ramp and i have to apply a generous amount of force to get it up the ramp. Manually loading the chamber is no problem with...
  11. F

    Maggie’s who Said U Can't Solve Problems?

    PHONE REPAIR Lawrence, Kansas, December 12, 2008 A Kansas farm wife called the local phone company to report her telephone failed to ring when her friends called - and that on the few occasions, when it did ring, her dog always moaned right before the phone rang. The telephone repairman...
  12. Captain Moroni

    Gunsmithing Savage ejection problems???

    Hey guys I have a problem with my savage not ejecting the brass it extracts just fine but then just drops it on top of the mag. the plunger seems to be working but maybe the spring my be weak? any ideas? Thanks Tucker
  13. G

    SIG Trailside problems, inconsistent trigger pull!

    Hey guys, have had this Trailside for a little more than a year now. Shoot it a fair amount, and the girlfriend loves it! It has a red-dot on it, and usually shoots lights out. My problem lately is that while shooting our local pistol league (25ft, one handed.... 4 targets 10 shot each no time...
  14. B

    Cooey Model 64B problems

    Hello, Not an avid poster but have been a lurker for awhile now. Well I finally got my first rifle, a good cheap little Winchester Cooey Model 64B .22LR semi-auto. Got it cheap and still shoots true but it jammed every shot so i took it fully apart and cleaned it and now it only jams every 3rd...
  15. J

    Advanced Marksmanship sighting problems on remington 700?

    Hey guys, im new on this forum but i am in need of advice. I recently purchased a Remington 700 sps .308, i have a bushnell scope on it, a harris bipod and am shooting 150 gr. remington core lokt ammo. Im having a problem sighting it in, it will shoot dead on cold bore then it tends to rise from...
  16. sv650_pimpin

    Rifle Scopes sighting problems....

    I just bought a nikon buckmaster 4.5-14x40 scope. Cabelas mounted it. and sighted it for 50 yards. with my tangefinder at a target at 45 yards. scope is wayy off. how do i sight it in, when its so bad i cant even hit the target? im shooting a rem 700 sps-v .308. any suggestions? tonight, im...
  17. R

    Gunsmithing Kimber 84M accuracy problems

    I bought a new Kimber 84M Classic in 7mm-08 to celebrate getting back from Iraq a month ago. Unfortunately it doesn't shoot worth a shit. I had heard that this was a periodic problem with the Kimbers and that because of their dainty actions and firing pin springs may be prone to misfires but...
  18. Black-X

    Lapua .308 brass problems?

    I'm looking through my 2 new 100rd cases of Lapua .308 brass and every primer hole has a burr in it. I'm guessing that this isn't normal? Should I bitch or just clean em' out? I've never had any Lapua brass before but so far I'm not overly impressed. Also the case mouths are a little rough...