weight

  1. Vivacious Stallion

    SOLD Accuracy International AT-X Keyslot Brass Internal Weight

    Hello Hide, Up for sale is a pair of AI/Wintac factory AT-X Keyslot Brass Internal weights. These were briefly mounted inside of my AT-X 6gt build, however I overestimated the amount of front weight I needed to balance this rig. They were used during load development, but never saw match...
  2. S

    Savage Axis II XP + Magpul hunter lite upgrade

    Good afternoon, First post on here, couldn’t find any info on someone doing this! I own a Ruger American Hunter in 308 win and it’s an absolute tax driver, but it’s quite heavy for longer walks in the prairies of Alberta. I’m looking at grabbing a short action savage axis II XP in...
  3. T

    KRG Bravo Tikka T1x Balance

    I have a T1x in a Bravo and it is way too back heavy. I added a heavy arca rail from KRG, a t-slot forend weight from KRG, MDT M-lok weights at the end of the rifle and it is still way too back heavy. The balance point is somewhere around the magwell right now. I don't wanna rest my rifle on the...
  4. T

    SOLD Gray Ops Matrix Pro Secondary Weight Kit

    Gray Ops Matrix Pro secondary weight kit. This must be used in conjunction with the internal weight kit to work. I switched to a Foundation stock so I'm parting out my stock. This kit adds a ton of weight to the chassis and is a great addition. $150 shipped.
  5. Wild Eyes Woodworks

    SOLD XLR mercury recoil reduction rod

    140 new. Used for a season until I needed to shave weight for NRL hunters. 110 TYD
  6. Bolt Thrower

    SOLD MDT Weights

    SOLD Two MDT ACC Interior Forend Weights - $55 I have two extra interior forend weights. Each weight is 0.5 lbs and comes with four 10-24 screws for fastening to the chassis.
  7. Z06pilot

    SOLD Rimx Barreled Action

    For sale Rimx barreled action. $1850 shipped. Or open to trades 1 year old. Less than 500 rounds on the barrel and action. Barreled action weight 5lb 1 mag included 20” carbon fiber sendero proof barrel Not included: Stock, scope, rings, trigger, bipod, bottom metal, suppressor, tuner...
  8. W

    Weight of Zermatt Origin scope rail

    I’ve searched high and low but can’t seem to find an answer anywhere, does anyone know what the weight of the factory scope rail on an origin short action is? I’m trying to decide if there is much weight to lose by switching to direct mounts such as Talley Lightweights. I know that rails don’t...
  9. Bolt Thrower

    SOLD KRG Arca Forend (Aluminum)

    SOLD Used KRG Arca Forend (Aluminum) - $140 shipped Fits Rem 700 SA Bravo, X-ray and Whiskey-3 Chassis. I used this briefly on a Bravo that was a placeholder chassis and shot a couple 22LR matches. Everything is in good condition, there are just cosmetic blemishes on the finish from use (see...
  10. CBeck

    SOLD MDT ACC Mirage Shield White $110 Shipped

    I have the following MDT accessories to offer up. Mirage Shield White $110 MDT Vertical Grip Elite $75 3 pairs of MDT external weights $150 MDT buttstock weight $50 MDT Steel Bag Rider $40 MDT Interior weight kit $140 All prices include shipping. Payment PP f&f or Venmo. Any...
  11. Bolt Thrower

    SOLD MDT Buttstock Weight

    MDT Buttstock Weight (part #: 103789-BLK). Mounts in the lower pocket of the MDT ACC, ESS and SRS V5 buttstocks. Adds 0.65 lbs. Used once. $55 shipped. Would also trade for forend weights.
  12. syoakem711

    SOLD MPA Matrix R700SA RH w/full weight kit

    MPA Matrix in burnt bronze. Comes with full internal and external weight kits. It has been used for 2 seasons and shows some wear. Also includes Heckler grip, large vertical grip, large and small lop buttpads, pro and standard cheek risers, thumb rest, and trigger finger spacers. Asking $950 +...
  13. KeithStone

    SOLD KRG Arca and weight

    Gonna put my 223 on a diet so I have a krg heavy arca rail (1lb 3oz) and a forend t slot weight (.75lb). The t slot weight has some krylon on it but should come off with acetone if it bothers you. Also I lost some of the set screws but I never had any problems with it coming loose. $140 shipped...
  14. J

    SOLD MDT ACC Internal Weight Set / MDT Spare Round Holder

    MDT ACC Internal Weight Set w/ hardware $125 shipped to lower 48 MDT M-LOK MULTI-CALIBER SPARE ROUND HOLDER $40 shipped to lower 48 Magpul AICS Pmags (2x used 2x brand new) $90 shipped to lower 48 for all 4
  15. SniperCook

    SOLD BERGARA B-14 HMR stock and area 419 weighted arca rail.

    Bergara stock Remington 700 SA with weighted arca lock rail from area 419. Asking for 350
    • SniperCook
    • Thread
    • 419 area 419 bergara hmr hmr mini chassis rem700 shortaction stock weight
    • Replies: 1
    • Forum: Buy - Sell - Trade
  16. Safety_3rd

    SOLD MDT ACC, folder, mirage shield, internal weights, black

    Got a cert and built this up. Hate to see it go. Only use has been the bipod for the pictures. Don’t want to part out until the chassis sells. And that buyer gets first dibs. 1550 shipped. 1900 is what it costs to build out out after tax. No trades unless it’s high end optics and I will add...
  17. Safety_3rd

    Accessories Mdt acc, mirage, butt weight, mdt grip

    Like ned mdt acc Butt weight Action screws Tungsten Grey Webad pad Might have some of the boxes it came with $1000 shipped insured priority *** price drop 950 Prefer venmo and PayPal will ship within two days. I'll send pictures of it packaged and tracking number. Patrick Also posting the full...
  18. G

    Lighter Tikka TAC A1

    I'm new to long-range shooting (2-3 years) but got into it with a factory Tikka TAC A1 6.5 CM with a Viper PST Scope. I'm loving the added range and accuracy the Tikka adds to my rifle collection. The rig is great fun plinking at the range but a beast when toting to the blind for hunting. What...
  19. Benballer334

    Firearms WTS SOLD Sig Sauer P320 X Five Legion

    Here is my Sig Sauer P320 X-Five Legion. It's basically ready for competition. I am only asking $1500. I am not looking to trade nor am I looking to separate the package. It will come with everything from the factory (meaning all the original parts will be included), plus a few extra magazines...
  20. ammolytics

    Rifle Brass Sorting Experiment - Part One

    Hey everyone! I published the first part of an ongoing experiment which explores the relationship between the weight and volume of rifle brass. https://blog.ammolytics.com/2020-01-08/brass-sorting-part-one.html The results were pretty interesting, and I was surprised by a few of the findings...
Top Bottom
Back
Home
Forums
Merch
Alerts