win

  1. M

    208 A-Max in 300 Win mag

    How well will a 208 A-Max work out of a 1 in 11 barrel? Or how about 185 Scenars?
  2. E

    Reloader 17 and .308 win

    I'm not sure if I made a mistake when ordering my poweder or what I did, but I ended up with 8 pounds of Reloader 17, that my intention is to load .308 win 150gn Sp. I can only find one recipe and niether of them are from a book. The one I found was from alliant powders own wen site...
  3. Powder_Burns

    210gr SMK + .300 Win Mag starting suggestions

    Hello, 1st post, new to the site and forums. I am going to start playing with Sierra's 210gr BTHP and I wanted to know what would be a good seating depth to start working from. Should I be on the lands with this bullet, or just off of them? The rifle is a browning a-bolt medallion in .300 win...
  4. C

    Savage 110 300 Win Mag barrel twist??

    Hey all, I picked up a Pre-accutrigger savage 110 tactical in 300 win mag over the weekend. Rifle was in rough shape but is cleaning up well. I just wanted to know if anybody knew the twist in these. From what I can find they are 1-10" but not positive. I also need to get rid of this...
  5. kombayotch

    RL-17 beats N550 in 308 Win. w/ 208 AMAX

    Revisited 208/210 grain bullets for the first time since getting Pressure Trace. RL-17 is "THE" powder for the heavies (in my short chamber, at least). 26" Schneider 1-11", GAP chamber 208 AMAX Hornady Cases 210M 2.930" COAL 2.200" OG (0.020" from the lands) Worked up to: N550: 45.5 gr...
  6. Gilly

    300 win mag load with 4350

    Hey guys looking for a load for my 300 win mag. I am using what I have been able to get my hands on the last few months. Here is what I have Once fired winchester brass will be FL resizing Hodgdon H4350 powder CCI LR Mag primers or Rem 9 1/2 LR Mag Primers Sierra 180 Gr. Gameking bullets I...
  7. mavrick10_2000

    Win 257 +P Brass in Stock, Midway and Natchez

    If anyone has a .257 Roberts or AI Chambering both Midway and Natchez SS has the Win +P Brass in stock - it's been a while.
  8. wnroscoe

    Newest .243 Win Build

    Krieger 1-8" HV 27" .243 Win Match Trued Rem 700 Surface Ground Tubb Lug Pillar Bedded in a ADJ. HTG Woodland Remington Trigger Badger M5 20MOA Rail Tac Ops Bolt Knob Flat Black Gun Kote
  9. N

    243 win

    im getting ready to load 243 for the first time.im going to use 105 amax and was told to try h1000.has anyone else used this mix and have an opinion on magnum primers
  10. B

    300 Win Mag or 338 Lapua

    Looking for opinions on which caliber for first long range rifle. Looking at Sako TRG's.
  11. Jrb572

    Best .308 Win Dies.

    I am looking for opinions on what you like or don't like about any brand dies for a .308. If this has been covered before I'm sorry. I have been reading the how to speed up your 308 reloading so I know about that set up. But what dies do you think are the best or the worst you have ever used and...
  12. D

    Reloader 17 with 105 grains bullet in 243 win

    Has anyone tried this powder in the 105 grains bullets (Scenars and AMAX)? Got the article from 6 mmBR, but they only go up to 100 grains bullets. Any help is appreciated.
  13. N

    Unknown headstamp - .308 Win & .30-06

    Picked up some spent brass at the range recently. The .308 Win was headstamped "CAVIM 83". The .30-06 was headstamped "HXP 63". Military stuff I presume, but not from L.C. Some other NATO country of origin?
  14. barrysuperhawk

    300 Win Mag, new reloader, advice?

    A good friend of mine just had a Winchester 300 win mag rifle given to him by his dad. When he went to look at ammo, the sticker shock bout killed him and his first call to me was "teach me to reload". So, we have him set up with a single stage press, dies and goodies are on the way, as is a...
  15. ranger1183

    Long-Gun Bargains at CDNN — Rimfire and .308 Win

    FWIW - Long-Gun Bargains at CDNN — Rimfire and .308 Win http://accurateshooter.wordpress.com/2009/04/22/long-gun-bargains-at-cdnn-rimfire-and-308-win/ http://www.cdnninvestments.com/dowournewcat.html
  16. BgBmBoo

    WIN. LARGE RIFLE PRIMERS still in stock....

    Still showing 1000 packs in stock at: http://www.recobstargetshop.com/browse.cfm/2,152.html These are Winchester WLR's. Take care,Stan
  17. D

    Pre-64 Win 70 Action In McMillan HTG Stock

    Does anyone know if the pre-64 Win Model 70 action will fit and could be ordered in the McMillan HTG stock? I'm curious if anyone has done it. I'm looking to build a rifle based on an action that I have. I would use a barrel contour similar to the Rem varmint contour. Any other suggestions...
  18. L

    .308 Win Brass

    I recently purchased a Armalite AR-30 in .308 and really have had a lot of fun learning about long distance shooting. I do not reload and have ran nothing but Hornady 168 AMAX and BTHP Match through it. If anyone is interested in this once fired brass shoot me a PM
  19. E

    Gunsmithing Win 70 pre '64 firing pin . .

    Looking for a good reputable source for <span style="font-weight: bold">Win 70 pre '64 short</span>, parts. Are there a number of OEMs out there ? If so, which manufacture the finest products ? I haven't dealt with Numrich in years, are they still a thumbs up outfit ? I only want to buy it...
  20. ChadTRG42

    New Hornady Published Data- 308 Win w/ 208 A-max

    I just got an email from Hornady with some new published data for the 308 Win with the 208 A-max. Here is what Hornady listed: 308 Win- 208 Amax, WLR primer, Hornady brass, Win M70 22", 2.80", 1:12" twist Varget- Start load: 34.9 @ 2100 fps Max load: 40.0 @ 2300 fps IMR 4064 Start load: 36.2...
Top Bottom
Back
Home
Forums
Merch
Alerts