I was wanting to know what bullets you all are using for paper for the 10mm auto? I have factory Glock. What would be the best cheapest bullet and weight for just punching paper? I know best and cheapest do not always go hand and hand. I just do not want to dump expensive hollow points down range just for practice or target shooting.
10mm target bullets.
- Thread starter Jrb572
- Start date
Re: 10mm target bullets.
Look into Berry's Bullets out of Utah , Ive had good luck with them in my 10's , but now I'm 10 less ...............
Look into Berry's Bullets out of Utah , Ive had good luck with them in my 10's , but now I'm 10 less ...............
Re: 10mm target bullets.
Precision Delta for lighter weights 165, and 180gn(.40 cal).
I use their 9mm, which I think is better quality and has thicker plating than Berry's. So I'm assuming that will also be the case for 10mm.
http://www.precisiondeltasales.com/
Precision Delta for lighter weights 165, and 180gn(.40 cal).
I use their 9mm, which I think is better quality and has thicker plating than Berry's. So I'm assuming that will also be the case for 10mm.
http://www.precisiondeltasales.com/
Re: 10mm target bullets.
I love the nosler 135's/ 11.5g Power Pistol @ 1550FPS out of a 5" Kimber Custom Target 2. $35 per 250 on midway when they have them. I bought a 40 cal Bar-Sto barrel to run the .40's in IDPA and to practice. The 10mm is not really priced for plinking. So if i'm going to shoot it might as well shoot it for what it is.
BTW check out lone wolf barels or other aftermarket glock barrels that have a fully supported chamber. DO NOT try my load in your gun w/ the factory barrel. But if you do please post pics of glock Ka-boom
I love the nosler 135's/ 11.5g Power Pistol @ 1550FPS out of a 5" Kimber Custom Target 2. $35 per 250 on midway when they have them. I bought a 40 cal Bar-Sto barrel to run the .40's in IDPA and to practice. The 10mm is not really priced for plinking. So if i'm going to shoot it might as well shoot it for what it is.
BTW check out lone wolf barels or other aftermarket glock barrels that have a fully supported chamber. DO NOT try my load in your gun w/ the factory barrel. But if you do please post pics of glock Ka-boom
Re: 10mm target bullets.
If you don't want to cast bullets then the offerings other people have given are all good. From commercial bullets I get the best results from the Hornady XTP's, but I don't shoot too many of them.
If you want to cast lead bullets, it's possible to make very hard lead that won't gum up the glock barrel. Most of what I shoot from my 10mm to practice with is lead. Works like a champ. I shoot them from my drop in Lone Wolf 40 barrel and the OEM Glock barrel without issue.
If you don't want to cast bullets then the offerings other people have given are all good. From commercial bullets I get the best results from the Hornady XTP's, but I don't shoot too many of them.
If you want to cast lead bullets, it's possible to make very hard lead that won't gum up the glock barrel. Most of what I shoot from my 10mm to practice with is lead. Works like a champ. I shoot them from my drop in Lone Wolf 40 barrel and the OEM Glock barrel without issue.
