Hello all, I'm looking for a Bottom Metal system that will fit in the B&C A5 tactical stock with the absolute least amount of fitting required.
Thanks for any and all help!
Thanks for any and all help!
10rd Mag system for B&C A5 Tactical stock?
- Thread starter Adician
- Start date
Re: 10rd Mag system for B&C A5 Tactical stock?
Take a look here. The one made by Wyatts is supposed to be a drop in for B&C stocks
http://www.stockysstocks.com/servlet/the-110/Bell-Carlson-tactical-700/Detail
Take a look here. The one made by Wyatts is supposed to be a drop in for B&C stocks
http://www.stockysstocks.com/servlet/the-110/Bell-Carlson-tactical-700/Detail
Re: 10rd Mag system for B&C A5 Tactical stock?
As far as I know, Wyatts mag system is only 5 rounders.
Thanks though!
As far as I know, Wyatts mag system is only 5 rounders.
Thanks though!
Re: 10rd Mag system for B&C A5 Tactical stock?
They have 10 round mags in stock at stocky's for the wyatts dbm. 69.95 each
They have 10 round mags in stock at stocky's for the wyatts dbm. 69.95 each
Re: 10rd Mag system for B&C A5 Tactical stock?
Well I'll be darned. Thanks a lot!
Are there any pictures of the 10 rounders? Wyatts system isn't staggered, and I'm wondering what the length of the mag is because of that.
Thanks again Roper, it's much appreciated.
Well I'll be darned. Thanks a lot!
Are there any pictures of the 10 rounders? Wyatts system isn't staggered, and I'm wondering what the length of the mag is because of that.
Thanks again Roper, it's much appreciated.
Re: 10rd Mag system for B&C A5 Tactical stock?
Adician,
You may want to find someone that has the Wyatts mag system and see how it works. The last thing you'll want is to be tied into a proprietary magazine system if the mags are unreliable, unavailable or too much money. Even if you didn't have to inlet your stock for your DBM
Adician,
You may want to find someone that has the Wyatts mag system and see how it works. The last thing you'll want is to be tied into a proprietary magazine system if the mags are unreliable, unavailable or too much money. Even if you didn't have to inlet your stock for your DBM
Re: 10rd Mag system for B&C A5 Tactical stock?
I have a wyatt's system sitting on my bench downstairs but I haven't recieved my B&C A5 yet (it should be here within a week or so). As such, I can't comment on the reliability; however, I can tell you that the bottom metal and magazines feel very stout. I haven't picked up any extra mags yet, but I plan on getting at least 1 10 rounder in the future. I too am worried about the length, I probably would ask for some dimensions of the 10 rounder before I would purchase one (the 5 rounder is already pretty long.
I have a wyatt's system sitting on my bench downstairs but I haven't recieved my B&C A5 yet (it should be here within a week or so). As such, I can't comment on the reliability; however, I can tell you that the bottom metal and magazines feel very stout. I haven't picked up any extra mags yet, but I plan on getting at least 1 10 rounder in the future. I too am worried about the length, I probably would ask for some dimensions of the 10 rounder before I would purchase one (the 5 rounder is already pretty long.
Re: 10rd Mag system for B&C A5 Tactical stock?
There seem to be 5 round assemblies(singlestack) and 10 round assemblies(what I can only assume to be staggered), if anyone has any information on these, it'd be great.
Thanks!
There seem to be 5 round assemblies(singlestack) and 10 round assemblies(what I can only assume to be staggered), if anyone has any information on these, it'd be great.
Thanks!
Re: 10rd Mag system for B&C A5 Tactical stock?
I just sent the Wyatt DBM back to midway. It sucks. Hard to feed. After I would go through the 5 rounds, the mag would be stuck and I would have to force it forward so I could push the tab in to release the mag. Hard to get mag to even lock into place. This was in a B&C A2. It was drop in fit but unreliable as hell.
Save your pennies and get a CDI.
I just sent the Wyatt DBM back to midway. It sucks. Hard to feed. After I would go through the 5 rounds, the mag would be stuck and I would have to force it forward so I could push the tab in to release the mag. Hard to get mag to even lock into place. This was in a B&C A2. It was drop in fit but unreliable as hell.
Save your pennies and get a CDI.
Re: 10rd Mag system for B&C A5 Tactical stock?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Savage_Jake</div><div class="ubbcode-body">Save your pennies and get a CDI. </div></div>
+1
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Savage_Jake</div><div class="ubbcode-body">Save your pennies and get a CDI. </div></div>
+1
Re: 10rd Mag system for B&C A5 Tactical stock?
I had a B&C A5 stock and wanted the same thing. I ended up sending my stock to GA Precision to do an inlet for the Badger M5. It was awesome work, but will cost around 75 bucks plus shipping
Heres a pic of mine
I had a B&C A5 stock and wanted the same thing. I ended up sending my stock to GA Precision to do an inlet for the Badger M5. It was awesome work, but will cost around 75 bucks plus shipping
Heres a pic of mine
Re: 10rd Mag system for B&C A5 Tactical stock?
not sure if you were trying to go that route, but thought I'd throw it out there.
not sure if you were trying to go that route, but thought I'd throw it out there.
