123/H4350 Load Development

JFComfort

OG
Full Member
Minuteman
Mar 19, 2009
1,952
686
Las Vegas, Nevada
Load development with H4350 and 123 Lapua Scenar with my 26" match rifle. I didn't run them through a chronograph but reverse engineering dope at 715 yards. I'm estimating 2950-3000 fps with 45 grains. No pressure signs so I want to explore beyond 45 grains then dial in the the COL to get them shooting bug holes. 4.1 mils to 715 yards. I am loving the US Optics ER-25! The MIL MPR reticle is excellent, I want to get out and practice some range estimation with it soon.

The lower left group was my sight in using the team 139 load.

541550_10201118060498212_911303050_n.jpg


941877_10201118060578214_141588015_n.jpg
 
Thats a sweet setup and good shooting especially when you havent dialed it in yet. I have always shot the 139 lapuas and 142 smks through my 700 or savage. I just bought a bunch of 123 sierras and lapuas to try for the 3000 fps range. Good luck
 
With that 26" barrel, 3K+ shouldn't be an issue (assuming that's a 260). I'm getting 2900+ from 44.5gr of H4350 pushing 123 Amax's from my 20" 260 and it's ridiculously consistent.


Nice stick by the way!
 
45 grains H4350

417959_10201126454028045_1975886613_n.jpg


45.5 gains H4350

942203_10201126454068046_705035493_n.jpg


46 grains H4350

263247_10201126453948043_1649944039_n.jpg


I will play with the COL to see if I can dial in 45.5 grains. This load should be going 3,000 fps + I will run them through a chronograph when I get the chance to confirm velocity.
 
Stuff like this makes me want a shorter barrel on my 260 even more...

I was mistaken on my numbers there. 44.5 is giving me 2872fps average in Rem 7-08 brass, 2.805" COL. 45gr of H4350 is where it gets above 2900fps, but the accuracy is better from 44.2-44.7gr. One of these days I'm going to see what I can squeeze from some 130gr Bergers.