Barnes recently released a 6.5 mm bullet with a G7 BC of .350 and a G1 BC of .703. They sure look pretty. Load development to come. Picture next to a 140 eld for reference.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
A little update on this new bullet. This baby is long. I mean I guess that is to expected but OAL to touch the lands in 2.95". I will be jumping them .050" to keep them magazine friendly. This rifle has a little longer than average chamber and to touch the lands with a 140 ELD i am at 2.86". I decided to do initial load development with imr4831. I have lots of it and it is slower burning than H4350. I hope that means less pressure overall. If I get 2800 fps from my 27 inch barrel without pressure I will be happy. I will update this thread with my results.
Man that’s screaming fast. Wow! These peaked my interest for sure!I was able to get some load testing done today. I loaded 17 rounds up. I am using IMR4831. Starting at 42 and ended a ways above max at 46.5 grains. I am doing 2 things. Checking where the pressure ceiling is in my rifle and looking for flat spots in velocity. My results are as follows.
42.0 2710 fps
42.3. 2747
42.6. 2763
42.9. 2788
43.2. 2807
43.5. 2831
43.8. 2860
44.1. 2887
44.4. 2898
44.7. 2902
45.0 2928
45.3. 2935
45.6. 2972
45.9. 2955
46.2. 2981
46.5. 3011
I have a 15 fps spread from 44.1-44.7 and I think I will look into this a bit more. This barrel is a bit faster than others I have had but I did not expect this much speed.
Book max is 44.3 gr according to the hodgon load manual. I did not see pressure till 45.9gr and have no intention of loading that high.
I always have slow rifles 41.7 is 2710 in mine41gr of H4350 was 2810 fps with a 147eld
I always have slow rifles 41.7 is 2710 in mine
24” but all my rifles seem slow compared to other folks, my bra does 105h at 2890 it seems everyone else runs about 2920-2940. My 6creed is the olny one that does well 3150 with 108’s and it’s not smoking fastWhat barrel length?
You got over 3k fps out of a creedmoor with a 145 grain bullet???
Any word on these yet? Was hoping something would be released prior to the start of SHOT.
Barnes Precision Match 6.5 PRC Ammo 145 Gr Match Burner OTM BT - Ammo Deals
Barnes Precision Match 6.5 PRC Ammo 145 Grain Match Burner OTM BT for sale at Target Sports USA with free shipping available. Enjoy deals on 6.5www.targetsportsusa.com
Only $20 a box... When these come out they should pickup a lot of steam..
Just got my bulk box of 500 in. My barreled action should also be in today. Will be loading these for 6.5 PRC. It'll be a week or so before I can test any loads.Tagged, anyone else get their hands on these yet?
Where did you get them?Just got my bulk box of 500 in. My barreled action should also be in today. Will be loading these for 6.5 PRC. It'll be a week or so before I can test any loads.
That shouldn't be too hard, with rl16 and norma brass I got a great node at 43.3 grn and a great group sd of 5.4 moving at 2834 with the 144 gr bergers. mine was out of a 26 inch barrel. If i was you I would try some loads between 43.0-44 grn.Just ordered a few hundred straight from Barnes. Hopefully I have them before the weekend to see how they do in my creedmoor. I would like to see 2800fps with RL16 and a 24” barrel.
Just got my bulk box of 500 in. My barreled action should also be in today. Will be loading these for 6.5 PRC. It'll be a week or so before I can test any loads.
I think you have to go over $49, which is their standard shipping deal. Still pretty good though.Optics planet has free shipping on them.
Forgot about that, just said this item ships free and it was good enough to get my money!I think you have to go over $49, which is their standard shipping deal. Still pretty good though.
Not with all this COVID business going on. I work in EMS. No days off.Any luck testing yet?