Range Report 155's 8.2 mils 1000

#5
Re: 155's 8.2 mils 1000

AI AW ( rebarreled)
1/11.25 P5 Schnider 25.5 in barrel
Min chamber
28.8 min 8.4 mil real world ( at 102F) 8.6 at 85F
2970 Fps
Sea level
155 Lapua Bullet and Lapua Case F/L
2.8 OAL .010 to lands
46 RL 15 Wolf Primer

Accurate will hold less than 1 1/2 at 300 yds have shot 15x out of 20. 1000 yds never any problem have shot for years

AT 102 F had a small black speck primer leak, first time that has happened maybe because I try not to be out there in direct sun at 102F.



 
#7
Re: 155's 8.2 mils 1000

Rifle: Surgeon
Barrel: Krieger MTU 1-11" 26"
Case: Lapua
Powder: Varget (45.5-47.0)
Primer: F210M
Bullet: 155 Scenar
MV: 2980fps
.005 off the lands
2600 el 50F
zero range is 160 meters. 7.5 mils for 910 meters(994 yards)
 
#8
Re: 155's 8.2 mils 1000

Action: 700
Barrel: Shillen 1-10" 25.5"
Case: Lapau
Varget 46.1
Primer: CCI
MV: 2936 ave
COL: 2.828
Zero @ 100yd. 7.6 - 8.2 mils @ 1000yd depending. you know it and seen it.

need anything else let me know.

King Pin
 
#11
Re: 155's 8.2 mils 1000

Mike Rock 11.27 twist
Length:26
altitiude:370 ASL
speed: 2900
Varget:46 gn
temp:90-95 degrees
MOA: 30.25 to 1K

Can push it faster but this is a more accurate load.
 
#12
Re: 155's 8.2 mils 1000

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pvfd304</div><div class="ubbcode-body">I just ordered a box of the new 2156 Palma's from Sierra. Hope to glean some info from here. Anyone using them yet?

</div></div>

Just barely started playing with them myself. With my RL15 load they shoot great at 100. Thats all I've tested so far. Need to work on a Varget load.

My 155 Scenar load is 44.0 gr RL15, 210M, RA60 brass, 23" bartlein, palma chamber, 4000ft ASL, 2850 fps. 8.7 mils to 1k.
 
#14
Re: 155's 8.2 mils 1000

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: reynolds</div><div class="ubbcode-body">Action: 700
Barrel: Shillen 1-10" 25.5"
Case: Lapau
Varget 46.1
Primer: CCI
MV: 2936 ave
COL: 2.828
Zero @ 100yd. 7.6 - 8.2 mils @ 1000yd depending. you know it and seen it.

need anything else let me know.

King Pin </div></div>

yeah i saw it but still can't believe your getting 7.6 mils one day and 8.2 another with nearly the same heat.
 
#15
Re: 155's 8.2 mils 1000

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: matchking</div><div class="ubbcode-body">
32 IPHY (leupold MOA)</div></div>

both my loopies have been checked are true MOA. interesting?

BTW Kingpin it was about 5500ft Density Altitude on Saturday, we'll cover that chapter when you get back.
 
#17
Re: 155's 8.2 mils 1000

Stock TRG 22 W/ SAS Can
155 Lapuas
47g Varget
Fed Match primer
Mag Length
2930
8 -8.3mil to 1000 actual Depending on elev & Temp

Patriot Arms 700 w/SAS can
24"Bartline
155 Lapua
46g Varget
Fed Match primer
Mag Length (AICS stock Mag)
2910
8 -8.3mil to 1000 actual Depending on elev & Temp

Both are set up as close as possible in Vel to run the same dope. They group tighter than I can Shoot.
 
#19
Re: 155's 8.2 mils 1000

Douglas aka Kingpin was running 7.4 mils to 1000 and only missed the clay target by a inch or two of wind.

Me thinks his USO (i sold him)is fucked up or <span style="font-weight: bold"><span style="color: #FF0000">his .308 is magic</span></span> considering he's flatter than my 142 SMK 260 load.

Although the USO shot same elevation as does my Leupold when it was on my 260.

can any body figure this out
first day it shot perfect 8.2 mil @ 1000(as i predicted)
next day 7.6 mils
last night 7.4 mils

no cleaning in between... velocity remains the same at 2940+- 15fps
Zero remains the same.
We also dialed and used the reticle to hold over to confirm correlation.
BTW coldbore shots (data) were at 1000 so barrel is not heating.
 
#21
Re: 155's 8.2 mils 1000

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Onemoretime</div><div class="ubbcode-body">I plan to try some out of my 30-06. Anyone guess what I might see for velocity? </div></div>

I'm getting 3050 fps via 57gr RL15, moly, Win brass, 22" 1/10 twist Douglas barrel. .5 moa accurate. 24.5 moa to 1000 yds at 4500' elevation.
 
#23
Re: 155's 8.2 mils 1000

Rich, When you were shooting at 1000 with 7.4 mils did you run it back to zero and shoot it at 100? Or did you shoot it at 100 first? Or both?.......strange.
 
#25
Re: 155's 8.2 mils 1000

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: PGS</div><div class="ubbcode-body">Rich, When you were shooting at 1000 with 7.4 mils did you run it back to zero and shoot it at 100? Or did you shoot it at 100 first? Or both?.......strange.</div></div> done it both ways
 
#26
Re: 155's 8.2 mils 1000


<span style="font-size: 11pt"><span style="font-style: italic"><span style="font-weight: bold">30-06</span></span></span>
Model 700
Broughton 7.4 LV 5C 1/12 @ 28"

<div class="ubbcode-block"><div class="ubbcode-header">Code:</div><div class="ubbcode-body ubbcode-pre" ><pre>155 grain Lapua Scenar
3.255” coal
Winchester Brass
Federal primer
51.6 grains of RL-15
Hi-3147 fps Lo-3103 fps Avg-3123 fps
ES-44 fps SD-18 fps </pre></div></div>
 
#27
Re: 155's 8.2 mils 1000

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Insert Name Here</div><div class="ubbcode-body">

Do all GAP Crusaders have such a long throat????? </div></div>

Both my GAP rifles are. I have to seat out long to get at the lands.

How does the 155's run in the precision gassers?
 
#28
Re: 155's 8.2 mils 1000

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: LOBO</div><div class="ubbcode-body">
<span style="font-size: 11pt"><span style="font-style: italic"><span style="font-weight: bold">30-06</span></span></span>
Model 700
Broughton 7.4 LV 5C 1/12 @ 28"

<div class="ubbcode-block"><div class="ubbcode-header">Code:</div><div class="ubbcode-body ubbcode-pre" ><pre>155 grain Lapua Scenar
3.255” coal
Winchester Brass
Federal primer
51.6 grains of RL-15
Hi-3147 fps Lo-3103 fps Avg-3123 fps
ES-44 fps SD-18 fps </pre></div></div>
</div></div>

Nice!
 
#29
Re: 155's 8.2 mils 1000

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pvfd304</div><div class="ubbcode-body">I just ordered a box of the new 2156 Palma's from Sierra. Hope to glean some info from here. Anyone using them yet?
</div></div>

I just started playing with the 2156 this week and preliminary looks very good. TRG 22, Lapua brass, Fed GM primer, 47 grains Varget, 3.250 to ogive, 108F, dens alt 8247, 9.6% hum. 2 5 shot 5/8" MOA @ 600, needed 12.25 MOA. The load is very close to my pet load of VV 150, 155 Berger match accuracy wise and that was first outing for the 2156, come up was same for both. No pressure signs but 47 Varget is listed MAX in my manual. My rifle did not like the old 155 Palma, I think they may have hit a home run with the 2156.
 
#30
Re: 155's 8.2 mils 1000

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Mark S</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pvfd304</div><div class="ubbcode-body">I just ordered a box of the new 2156 Palma's from Sierra. Hope to glean some info from here. Anyone using them yet?
</div></div>

I just started playing with the 2156 this week and preliminary looks very good. TRG 22, Lapua brass, Fed GM primer, 47 grains Varget, 3.250 to ogive, 108F, dens alt 8247, 9.6% hum. 2 5 shot 5/8" MOA @ 600, needed 12.25 MOA. The load is very close to my pet load of VV 150, 155 Berger match accuracy wise and that was first outing for the 2156, come up was same for both. No pressure signs but 47 Varget is listed MAX in my manual. My rifle did not like the old 155 Palma, I think they may have hit a home run with the 2156. </div></div>

How do the bullet ogive measurements compare with the Laupua 15 scenar?

I'm curious...

My loaded rounds are 3.25 from the ogive as well... I'm curious how the two bullets compare side by side from an ogive measurement perspective.


Sorry to hijack the thread...
 
#31
Re: 155's 8.2 mils 1000

I was out shooting this morning. I just switched from 175 gr Sierra's to 155 Scenars.
Here's the data from this mornings session:

AI AWP 20" factory barrel with can
155 Gr Scenar seated to 2.850 OAL, 46.5 Varget, virgin Lapua brass, BR2 primer
MV 2790 @ 350ft alt, 95 F, 40% Humidity
9.6 mils to 1K with 100 yd zero

 
You must log in or register to reply here.

Similar threads

S
155's in a 308 gas gun
Replies
20
Views
488
MikeMiller
M
FourT6and2
Help Interpreting DOPE
Replies
9
Views
505
Makinchips208
Makinchips208
neeltburn
155 ELD-Ms 308 Gas Gun Powders / Loads
Replies
6
Views
289
JR1200W3
JR1200W3
bbyars
PRS Talk PRS Tac Class 308 Win
Replies
38
Views
2K
Midpack
Midpack
A
  • Poll
Scope upgrade for 300-1000 yards target benchrest / prone comp?
Replies
2
Views
103
angelspire
A
Top Bottom
Back
Home
Forums
Merch
Alerts