Re: 1903a4 WW2 Sniper Range Report
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 81Z4ME</div><div class="ubbcode-body">Are you familiar with cleaning for corrosive ammo vs. non-corrosive ammo? Many folks say the regular powder solvents won't get the material (salt residues left over from the type of primer used) out/off of the metal.
All I can tell you is that I use black powder cleaning solvent most of the time, then wipe it down/lube it like a would if I had not been firing corrosive ammo. If you don't get those primer residues out/off they'll absorb moisture (hygroscopic is the fancy word) out of the air and create some nasty rust spots.
They also recommend you tear it down and inspect it again the next day and then a couple days later to make sure you didn't miss anything. </div></div>
Yeah cleaning after firing the corrosive stuff is a pain in the ass, I have a three step procedure that I usually use.
Day1: Hot soapy water followed by black powder cleaning solvent. Then a good wipedown and coating of break free. leave it out of the stock to dry.
Day 2: Repeat day 1
Day 3: A good breakfree scrubbing, leave a light coat of breakfree and back to the safe.
I give it a good look over a few days later to make sure all is well.
This is the reason I very rarely shoot corrosive ammo. I fired it this time because some jackass said the a4 was not capable of shooting consistant groups, wanted to make it a fair test so I used the old stuff. Obviously not a sub moa rifle but "It will hold 5 moa groups all day long if I do my part though!!!"
LOL that's a joke please don't start the flame posts...........
I have been doing this for 20+ years and have never had any corrosion issues. This one actually has a really nice bore on it, no pitting or darkness, it was well taken care of while in the field, probably a big part of why he survived!! Thanks