Sidearms & Scatterguns 1911 Picture Thread
- Thread starter sprice
- Start date
Kimber Custom Target
Sig Sauer Scorpion
Sig Sauer 1911-22
and a .38 revolver
In March Sig had a deal where if you buy any new full sized 1911 .45 you get a 1911-22 for free, it was too good to pass up- especially because the Scorpion was on sale and I had just sold my Springfield XD .45
Sig Sauer Scorpion
Sig Sauer 1911-22
and a .38 revolver
In March Sig had a deal where if you buy any new full sized 1911 .45 you get a 1911-22 for free, it was too good to pass up- especially because the Scorpion was on sale and I had just sold my Springfield XD .45
Here is my Springfield MC Operator. Picked it up used a few months back in MINT condition, didn't even look fired. So far ~350 rounds of various ammo from tula to aquila, even low recoil hollow points. No issues. Very accurate, shoots better than anything I've shot before.
Colt Series 70 reissue. Totally gutted down to the frame and slide then filled with goodness. Finally, Melanized inside and out. 18,500 rounds. Outside of changing the recoil springs every 3K as preventative maintenance, no parts breakage. Third barrel with a Kart in it now.
What bolt on rail is that???
Just got back into 1911s this past year after being a Glock user for many years. Have owned a Kimber Custom .45 in the past but sold it. Got this used STI Eagle .40 last year. Was blued, which I didn't like, so I sent it off and got it painted up by Michael at Controlled Chaos Arms.
Just this past week got my second STI in. A Trojan .40 with the Dawson CRP package. Hopefully get out to shoot it if I can get some time off work LOL This winter I will send it off to CCA again for a good paint job. Grips were a little slim and smooth so I ordered some VZ Operator II grips which shipped today.
Just this past week got my second STI in. A Trojan .40 with the Dawson CRP package. Hopefully get out to shoot it if I can get some time off work LOL This winter I will send it off to CCA again for a good paint job. Grips were a little slim and smooth so I ordered some VZ Operator II grips which shipped today.
Colt Wiley Clapp
Groups looked to be fired at Red's Indoor Range. I know the place well.
My finally-finished SA Champion carry piece.
Ahrend's Dymandwood thin grips
Ed Brown Tactical Safety
Dlask short titanium and magnesium trigger
Hogue aluminum mainspring housing
Pretty anorexic for a 1911, but packs so sweet!
Ahrend's Dymandwood thin grips
Ed Brown Tactical Safety
Dlask short titanium and magnesium trigger
Hogue aluminum mainspring housing
Pretty anorexic for a 1911, but packs so sweet!
My Kimber TLE/RL II
-Wilson Combat Bulletproof enlarged ambi safety
-Wilson Combat enlarged mag release
-Wilson Combat spring kit
-Wilson Combat full length guide rod
-Wilson Combat 10 round mag
-Dawson Precision Ice mag well
-Surefire X300
-Pacmayr grips
-Wilson Combat Bulletproof enlarged ambi safety
-Wilson Combat enlarged mag release
-Wilson Combat spring kit
-Wilson Combat full length guide rod
-Wilson Combat 10 round mag
-Dawson Precision Ice mag well
-Surefire X300
-Pacmayr grips
My wife's anniversary present for me. Springfield Armory Range officer in 45 acp.
View attachment SA.bmp
View attachment SA.bmp
A well used working man's Colt.
I've had this 1991 for 8 years now. EGW customized it lightly for me(grip safety and bead blast blued finish). This used to be my primary carry until I switched to Glocks, still shoots good after 10k rounds. Only failure I've had is the plunger tube came loose, never fell off though. Replaced it with an Ed Brown along with the plunger spring that was tweaked and was back in business. It's a rattle trap but it shoots nice groups at 10 to 20 yards and has a nice trigger 5lb trigger than I did the fitting on. One of these days I'd like to send it off and have some real sights put on and have it coated in either NP3 or a hard chrome.
Ed Brown Classic Custom Centennial Edition
Stainless Steel
Ambi Safety
VZ 320 Carbon Fiber Grips
Flush cut reverse crown barrel
Jeweled barrel hood
Extended magwell
Custom rib top of slide
Serrate back of slide
Polish sides of slide
Serrate bottom of slide release
Oversized mag release
Adjustable rear sight, gold bead front sight
Custom serial number
Centennial Edition Engraving
No Engraving RH Side Of Slide
Custom Serial# W/JMB Prefix, Jeweled Barrel Hood
Serrate Bottom of Slide Stop
Novak Gold Bead Front Sight, Custom Rib-Top of Slide
Laser Engrave Bushing, Flush Barrel Crown
Serrate Back of Slide
Stainless Steel
Ambi Safety
VZ 320 Carbon Fiber Grips
Flush cut reverse crown barrel
Jeweled barrel hood
Extended magwell
Custom rib top of slide
Serrate back of slide
Polish sides of slide
Serrate bottom of slide release
Oversized mag release
Adjustable rear sight, gold bead front sight
Custom serial number
Centennial Edition Engraving
No Engraving RH Side Of Slide
Custom Serial# W/JMB Prefix, Jeweled Barrel Hood
Serrate Bottom of Slide Stop
Novak Gold Bead Front Sight, Custom Rib-Top of Slide
Laser Engrave Bushing, Flush Barrel Crown
Serrate Back of Slide
Last edited:
My CQB:
Armor-Tuff Black finish
BP internals
BP Ambi safety
Gold bead FS w/ Batttlesight rear
Speed chute mag well
Best pistol I've ever owned, and my daily carry.
Armor-Tuff Black finish
BP internals
BP Ambi safety
Gold bead FS w/ Batttlesight rear
Speed chute mag well
Best pistol I've ever owned, and my daily carry.
![IMG_1388[1].JPG](/shooting/data/attachments/16/16720-763159eb8bf1e387bc7b22daf85302c8.jpg)
![IMG_1389[1].JPG](/shooting/data/attachments/16/16721-d8f932be7ffbdfaa63591eceadaecd46.jpg)
Being that this is a picture-centered thread, how do y'all post the bigger pictures? I just use the "go advanced" and then upload the pictures from there, which shows up as thumbnails...
Similar threads
