Group Buys 2020 Manners Snipers Hide Group Buy

tmanners

Sergeant
Full Member
Minuteman
Feb 3, 2006
535
468
1232 swift, NKC, MO.
2020 Manners Snipers Hide Group Buy

We at Manners Composite Stocks have been fond of and fortunate enough to be supported by the great community
of Snipers Hide. Because of this, Just like ever year on our new products, we are offering a group buy to all Sniper Hide
members, to say thank you for all your great support . Without you guys we wouldn’t be growing like we are. Below is
the new items that will be available for the group, along with the 2020 order form and rules. Thank you

PRS-TCS ( Tunable Competition Stock )
Retail base price $1495.00 Group Buy price $1345.50

The new PRS-TCS was developed exclusively for precision rifle competitions. It was designed from the ground
up with the ultimate goal of creating a fully weight-tunable stock to achieve the perfect balanced competition
rifle while using a wide range of barreled action combinations. The PRS-TCS is loaded with standard out-of-the
box-options not found on other stocks. Standard configuration of the PRS-TCS with the supplied weights is 5 lb 9oz.
A weight of 8 lb 11 oz can be achieved with the optional steel rail and by adding additional weights. The action
area of this stock is lowered so there is no need for a port or side release cut to fit most actions. It is designed for
all Remington-based right or left hand short actions only.

Standard Base Model Specs
• Full carbon fiber shell
• MCS-DBM mini chassis plus mag
• Weight-tunable 2 way butt 13" to 14.5" lop
• Weight Tunable Area 419/MCS Arca rail .
• Adjustable Cheek
• True molded-in barrel channel, up to a 1.25" straight barrel
• Ambidextrous thumb shelves
• Low profile fore end and action area, no loading port or bolt release cuts need on most actions
• 3 rear flush cups
prs-tcs-jpg.7226171

True molded-in barrel channel, upto a 1.25" straight
thumbnail_mcs-tcs-detail-1-jpg.7226187

Forend designed for very low profile. Keeps center of bore as low as possible.
thumbnail_mcs-tcs-detail-5-jpg.7226188


Weight tunable 2-way adjustable butt system. Comes standard with 1 10-oz balance weight. The base system without
the balance weight adds about 18 oz to the base stock. Depending on LOP, optional additional weights can be added for a
max rear weight of about 2 lbs 12 ounces. To accommodate the extra stress put on the stock by the tunable weight
system, the butt section of the stock is over engineered with a full wrap around shell.
thumbnail_mcs-tcs-detail-4-jpg.7226173

thumbnail_mcs-tcs-back-system-jpg.7226191

Weight-tunable Area 419/MCS Arca rail system. Comes standard in aluminum with one 2.9 ounce weight.
Rail is designed for weight to be moved front to back to achieve perfect balance. This rail wll hold a total of 7 each
weights, with the rail fully loaded with optional additional weights, it will give you a total of 1 lb 9 ounces.
A optional steel version is also available which allows up to a total of 2lbs 2ounces to be added to the fore end
of the stock depending on options. ( steel version show below )
thumbnail_mcs-tcs-rail-1-jpg.7226174


Sikes Clutch Option
Clutch - Retail with out rail $49.95 Group Buy Price$42.46 ( will work in any std cup )
Clutch plus in rail installed - Retail $99.95 Group Buy Price $84.96
One new option developed for the PRS-TCS and any of our other stocks, is the Sikes Clutch, designed by team
shooter and RET US Army SF sniper Bryan Sikes. The Clutch aids in the rifle control by having a
front post to help manage recoil & have a consistent hold for your rifle. The Clutch will work in any standard flush
cup. When paired up with the clutch rail, it gives you 5 available positions that
you can quickly and easily place the Clutch in your desired location and remove it when not
needed. The holes also double as convenient flush cups to maximize the available real estate
on your stock.
clutch2-jpg.7226181



MCS-CS 10/22

Retail $759.00 Group Buy Price $645.15
The MCS-CS 10-22 was designed with the same built-in features as the standard MCS-CS. A compact
platform and a quickly deployable butt system make it the perfect stowable truck gun. An added
feature of the CS 10-22 is a smaller than standard grip. This grip, along with an lop of 10.25" to 13.5",
makes it ideal for the youth shooter. Designed for the factory 10-22 and most after-market custom
actions.
mcs-cs1022-jpg.7226179


MCS-CP ( competition pistol )
Retail $559.59Group Buy Price $475.65

The MCS-CP was designed in a joint venture with Vapor Trail Bullets to be a long range
hunting/competition pistol platform. This stock will accept any Remington-based 700 short
or XP-100/Seven based action and barrels up to 1.25" straight. Can be ordered with any finish
or shell option as or stocks.
mcs-cp-jpg.7226180

Two new finishes for 2020
First, the Elite High Plains, show below on the new MCS-TCS
Cost, no additional charge on Elite Carbon fiber stocks,

If ordered on a standard shell, the Elite finish which includes a 100% carbon fiber shell and fill is - Retail $159 Group buy $135.15
prs-tcs-jpg.7226171

Second new finish, the Elite Tommy Bahama, show below on the MCS-PRS1
Cost, no additional charge on Elite Carbon fiber stocks,
If ordered on a standard shell, the Elite finish which includes a 100% carbon fiber shell and fill is - Retail $159 Group buy $135.15
thumbnail_2020-PRS1T-[Tommy-Bahama].jpg

Group Buy Details
*This group buy is available on all new 2020 products or stocks and options ordered along with stock.
*Pricing this year is a little different than years past. To make it easy, we are still offering 15% off on the complete stock
order, including all other options with the exception of the MCS-TCS stock. The discount on this stocks along with the options
included on it are 10%. The reason for this is that we have a tremendous amount of outside manufactured accessories included
in the base price of this stock.
*One stock maximum per hide member
*Group buy starts on Monday 3-23-2020 and ends on Friday 3-27-2020.
*Only available on Remington 700 or clone actions ( defiance, surgeon, bighorn, stiller, gap, ect. )
*Hide group buy discount cannot be used with any other offers, discounts or certificates.
To Place order for group buy
*Fill out the attached order form in the bottom of this post and email to [email protected]
*Please do not use the online stock builder on our web page. ( these orders will go into the system as a block of orders )
*Make sure that you give your hide name at time of order
*All the 2020 group buy orders will go in the system at one time. This means confirmation emails along with build numbers and specs will be emailed by the end of the day Tuesday 3-31-2020. If you do not receive a confirmation email by 4-1-2020, please contact the office or shoot me a PM here on the hide.
Thank you very much for your support,

Note**** Order form link Below
 

Attachments

  • 2020 Group Buy Order Form - 2.pdf
    417.1 KB · Views: 914
Last edited:
Whats the weight of the MCS-TCS without any of weights? It's a tossup between the TCS and a T4A Team cut for a full bull barrel and an Impact action.

Unrelated question, do you make a mini-chassis for the Defiance XM length actions?
 
Last edited:
  • Like
Reactions: wally247
Whats the weight of the MCS-TCS without any of weights? It's a tossup between the TCS and a T4A Team cut for a full bull barrel and an Impact action.

Unrelated question, do you make a mini-chassis for the Defiance XM length actions?
I think you'll be in the 4.5-5 lb range for the stock. We don't make a chassis for that action at this time.
 
Stupid question: is full payment due up front, or do we make a deposit with the remainder due when the stock is ready to ship?
Hi basher, no deposit, payment due the day it ships, once you order, the office will send out a confirmation email along with a build number. Once the stock hits final finish the will send out a email. It usually about 2 to 3 weeks to go thru the finish room. Let me know if you have any other questions. Thank you
 
  • Like
Reactions: Wulf and Basher
Can a rear flush cup be added to the pistol stock? If so, where is the best location to attach a sling? Thanks!

On my xp100s and custom Wichita single shot hunting pistols I’ve done over the years, I run the flush cup on the bottom of the grip. I got GAP spinning up a new barreled action in 6gt for one of the new stocks, I Think I’m going to try and run the cup on flat at the rear of the stock, behind the tang and see how it feels. Thank you
 
....alright, I just couldn’t resist any longer..email sent with order form. @tmanners any idea on an ETA when these might ship ?
You might have jumped the gun a bit
*Group buy starts on Monday 3-23-2020 and ends on Friday 3-27-2020.

In last year's, most orders were filled within about 8-9 months.
 
  • Like
Reactions: el-wood
It is called the CS-light weight cheek. It is has a very basic adjustment for elevation, only adds about 2 ounces to the stock. Can be added to the CS, CS2, EH1, EH5, t5, t2 and T4 stocks. Thank you
Hi Tom, What is the price for that option? In looking at the online configurator, is it the "Adjustable Cheek Spacer" for the $129.00?
 
Hi Tom, What is the price for that option? In looking at the online configurator, is it the "Adjustable Cheek Spacer" for the $129.00?
Yes that is correct, I should have made it more clear. On the stock builder the office has it as the adjustable stock spacer.

The group buy orders will all go throug the system on the attached form, if guys have trouble down loading just call or email office, they will send you one.
Thank you guys,
 
  • Like
Reactions: RobertB
Is there a confirmation email sent once the order form is sent? Just wanting to make sure it was received before the deadline.
no confirmation sent until orders are entered. At that time, if you don't get anything, you can contact them. I bet if you can show proof you initially mailed it during the timeframe that they'll work with you. Manners Customer Service is top notch!
 
  • Like
Reactions: Vapor159
I believe they will enter the orders after the 31st and send out confirmations then. The wait begins...took about 9 months last year and will probably be longer this year with the Chinese Flu involved...
 
After years of saying I wanted to join in on an SH/Manners group buy, I finally did! Shot an email over with my order form a little bit ago. Now to wait 9-12mos for this corona crap to blow over and my stock to get built! :)
 
From the original post.

A little disappointed in this in a couple ways. One I didn’t see this until tonight and I ordered a stock last week. Second it says for Remington actions or clones only so I would be out anyway since mine is for a Tikka build. So I guess if you prefer tikka you are not eligible for the group buy and discount.
 
A little disappointed in this in a couple ways. One I didn’t see this until tonight and I ordered a stock last week. Second it says for Remington actions or clones only so I would be out anyway since mine is for a Tikka build. So I guess if you prefer tikka you are not eligible for the group buy and discount.

Sorry, that sucks you missed it. From some above comments though, apparently the group buy also applied if you bought a stock in one of the new finishes. So, you would not have been excluded if you prefer Tikka. But if you didn't like the High Plains or Tommy Bahama finish then yes, you would have not been eligible with a Tikka stock.