Group Buys 2020 Manners Snipers Hide Group Buy

#101
jsimonh said:
Mine was 56225 and I got it July 10th. These stocks are sweet as hell. The top is gap and the bottom is high plains.

View attachment 7383055View attachment 7383054
Click to expand...

What contour is that barrel? It looks like your weight is going to be very similar to mine in terms of scope. Trying to figure out how much weight I need to buy in the arca rail / and the back weight spacers to get it to balance right.

For my MDT ACC I ended up buying a full internal and external kit, and ended up only needing 3 weights up front for balance, and removed the rear weight. I don't need to run a 21lb rifle... so I was lightening up my MDT ACC setup down to 19lbs.
 
#103
littlepod said:
What contour is that barrel? It looks like your weight is going to be very similar to mine in terms of scope. Trying to figure out how much weight I need to buy in the arca rail / and the back weight spacers to get it to balance right.

For my MDT ACC I ended up buying a full internal and external kit, and ended up only needing 3 weights up front for balance, and removed the rear weight. I don't need to run a 21lb rifle... so I was lightening up my MDT ACC setup down to 19lbs.
Click to expand...

The GAP camo is a MTU @28". There are 2 weights in the rail and only one in the back. Balance is right where you see in the pic. The high plains is a m24 @26" with an SiCo omega. Thats a 3-18 on it. One weight up front and one in the back. Both balance almost exactly in the same spot.
 
#104
jsimonh said:
The GAP camo is a MTU @28". There are 2 weights in the rail and only one in the back. Balance is right where you see in the pic. The high plains is a m24 @26" with an SiCo omega. Thats a 3-18 on it. One weight up front and one in the back. Both balance almost exactly in the same spot.
Click to expand...

Thanks! I'm running a 26" Proof Comp Contour, so heavier than M24. Looks like I might get away with zero weights in the front. And a 41oz scope (Tract 4.5-30x56).
 
#105
18E said:
I saw on IG yesterday a couple PRS TCS Stocks were available. I got a little excited and had to re read this thread in hopes my stock would get built sooner.
Click to expand...
if you, @Dustyplyr and @disla82 can get me your stock numbers I'll be happy to see where y'all are in the process. Lots of TCS stocks moving through right now.
 
  • Like
Reactions: disla82
#106
NiteQwill said:
You're a savage... you got two?! :)

My order is 57505. Not quite there!
Click to expand...
I show yours went into inletting about 2 weeks ago and for those stocks it's inletting and then finish. After finish is the best dept.......shipping :)

Please let us know if you have any other questions.

If anyone else wants their orders checked please let me know!
 
  • Love
Reactions: NiteQwill
#108
RobertB said:
I show yours went into inletting about 2 weeks ago and for those stocks it's inletting and then finish. After finish is the best dept.......shipping :)

Please let us know if you have any other questions.

If anyone else wants their orders checked please let me know!
Click to expand...
Oohhhmmmyyygaaawd

🤣 Thanks! Now, I gotta get the 737R action in my hand!
 
#116
Tom,
I missed this special, but want to thank you for the Veterans discount you offer. Sure is different from what we experienced during the Vietnam era. I‘ve bought my 2nd EH1A from you in 1 year. Love this stock! I hope to visit and thank you in person when my barrel comes in. That’s the only piece I’m don’t have for my next build. I’m going to hand deliver to GA Precision and visit some kin in KC. Thanks for creating such a fine business.......can’t get this quality in China!
 
#134
Mine arrived yesterday. Thank you manners i am very pleased with everything so far
 

Attachments

  • 20200825_1734331.jpg
    20200825_1734331.jpg
    684.7 KB · Views: 202
  • 20200825_1735291.jpg
    20200825_1735291.jpg
    652.4 KB · Views: 185
  • 20200825_1734411.jpg
    20200825_1734411.jpg
    630.2 KB · Views: 187
  • Like
Reactions: Nics00ss and Midpack
#136
disla82 said:
Mine arrived yesterday. Thank you manners i am very pleased with everything so far
Click to expand...

How's it balance? Can you tell me your weight setup? Mine is finishing this week and need to figure out if I want to order some extra weights.

I'm planning on running it with a Vudoo and my barrel is 5.8lbs. Though in your case it looks like you're running a carbon barrel so I'm guessing you need a bit of front weights if you want it to balance in front of the mag well.
 
#142
littlepod said:
How's it balance? Can you tell me your weight setup? Mine is finishing this week and need to figure out if I want to order some extra weights.

I'm planning on running it with a Vudoo and my barrel is 5.8lbs. Though in your case it looks like you're running a carbon barrel so I'm guessing you need a bit of front weights if you want it to balance in front of the mag well.
[/QUOTE
Sorry for the late reply. I think
Click to expand...
littlepod said:
How's it balance? Can you tell me your weight setup? Mine is finishing this week and need to figure out if I want to order some extra weights.

I'm planning on running it with a Vudoo and my barrel is 5.8lbs. Though in your case it looks like you're running a carbon barrel so I'm guessing you need a bit of front weights if you want it to balance in front of the mag well.
Click to expand...
Right now its balancing right at the magwell maybe slightly forward of it. I want to say thebwhole setup might be in the 14lbs maybe. However i am uncertain. So far i am in love with it. It looks amazing
 

Attachments

  • DSC_0643.JPG
    DSC_0643.JPG
    559.5 KB · Views: 111
#143
I got my Manners today and was really hoping that it'd work for my Vudoo in an 18" Kukri, but it is just too back heavy. I removed the rear weight, added all 7 weights to the ARCA rail, and it still was too butt heavy to balance in front of the mag well :(

So... decided to just throw it on my 6GT for now, put the rear weight back on, and it balances well. Sitting at 20.2 lbs though!

1600135153743.png
 
  • Like
Reactions: duramaxed, NiteQwill and BigPrince
#144
My MCS-TCS will be delivered Thursday. So will the new barrel I just snagged out of the PX, a M24 26" Rock Creek cut riffled 7.5 twist 🌈🐯
Have a new DLC Mousingfield M7 and just got 400 rounds of Prime 6GT delivered Monday. Still need a break and scope. This place is costing me $$$, but looking forward to this build.

@littlepod - How do you like that Leica? That is exactly the scope I've been eying with the PRB reticle.
 
  • Like
Reactions: NiteQwill
#145
357Max said:
My MCS-TCS will be delivered Thursday. So will the new barrel I just snagged out of the PX, a M24 26" Rock Creek cut riffled 7.5 twist 🌈🐯
Have a new DLC Mousingfield M7 and just got 400 rounds of Prime 6GT delivered Monday. Still need a break and scope. This place is costing me $$$, but looking forward to this build.

@littlepod - How do you like that Leica? That is exactly the scope I've been eying with the PRB reticle.
Click to expand...
I like it a lot. I wish the reticle was a little thicker to use in lower mags but it's beautiful at 15+. Glass is slightly better than atacr/kahles.

No locking turrets though. But the turrets are very tactile.
 
#146
littlepod said:
I like it a lot. I wish the reticle was a little thicker to use in lower mags but it's beautiful at 15+. Glass is slightly better than atacr/kahles.

No locking turrets though. But the turrets are very tactile.
Click to expand...
How would you say it compares to a Razor G2 4.5-27? It's between those 2 for me & I suspect the glass is a little better on the Leica. I already have a G2 and like it. Heavy bastard though!
 
You must log in or register to reply here.

Similar threads

awatson411
SOLD Manners TCS
Replies
2
Views
546
Mark_Dorman
Mark_Dorman
E. Bryant
Accessories Manners PRS-TCS Rem 700 SA RH stocks
Replies
10
Views
1K
bmoul2
B
Snoprokf
SOLD Manners Tcs midnight
Replies
2
Views
360
Snoprokf
Snoprokf
Mozak
SOLD Manners PRS-TCS stock REMINGTON 700 SA Right Hand GAP MOLDED
Replies
0
Views
309
Mozak
Mozak
2Twenty3
SOLD Manners PRS-TCS
Replies
3
Views
617
ryanowarrior
ryanowarrior
Top Bottom
Back
Home
Forums
Merch
Alerts