270 wsm

[Waknstak]

Anybody got a good load?

 

[Jspeed1440]

I shoot a Browning Abolt eclipse M1000 in 270 Wsm...shooting 1/2 MOA at 500 yds with Nosler brass, 140 gr accubond, 68 gr MagPro, and WLRM primers. Shoots equally as well with 58.5 gr IMR 4350.

 

[waspocrew]

Sold my WSM a while back but I had a good load with 140 Accubond, RL-22, and a fed 215 primer. Took two black bears with it and put them down fast.

 

[velvetant]

Winchester Featherweight.
Safe in my rifle but be sure to work up.
66gr H1000 150gr Nosler Partition
66gr H4831sc 130gr Nosler Accubond
Both in Winchester brass and CCI 250 primers.

 

[Kweo53]

Safe in my two rifles, ymmv:
Winchester case
72.0 grains Retumbo
CCI 250 primer
130-grain Berger VLD
mv (in my rifles across and Oehler 35P): 3327 fps
This has been my go-to hunting load for several years. Sub-moa in my rifles (Winchester 70 and a NULA M28). This would not be my first choice for elk, as the Berger hunting bullets are a bit soft, but it's excellent for deer and pronghorn. If elk is on the itinerary, try a TSX bullet.