I've got a r700 in 300 prc. The barrel is a 24" remage with 1 in 9 twist. I have a few pounds of h1000 to use. I can use up to CIP mag length. Which bullet would be better to 1500 yards max? The 215 because it's a little faster or the 230 because of its higher be? Would there be a better brand? A-max or smk or? Thanks!
-
Having trouble using the site?
Contact support
300 prc berger 215otm vs 230otm
- Thread starter Jscb1b
- Start date
I prefer heavier bullets. In my last barrel for my 300 PRC, I shot the 230 hybrids and loved them. Then they became unobtainiam and I bought a couple thousand of the 220 hybrids. I like them both, but seemed to have better results with the 230s.
I shoot my 300 at 1-1.25 miles - I'd expect similar at 1500 yards.
I shoot my 300 at 1-1.25 miles - I'd expect similar at 1500 yards.
Between the 215 and the 230, if we are not given speeds from your specific gun/load, then we have to assume typical values.
That looks like a 215 doing 2850 fps, and a 230 doing 2755 fps.
If those speeds are assumed, then you will find the 215 does slightly better in the 300 PRC due to the TOF difference to 1500 yards and less arc in the trajectory. So, on paper, a 215 is slightly better to 1500 yards. Change the energy level of the 230, you get a different answer.
You really cannot assume that the better trajectory and time of flight will translate to precision and accuracy in every gun. Sometimes, the gun forgets to read the book and decides to reverse the outcome.
In so many words, both good candidates and worthy of testing.
That looks like a 215 doing 2850 fps, and a 230 doing 2755 fps.
If those speeds are assumed, then you will find the 215 does slightly better in the 300 PRC due to the TOF difference to 1500 yards and less arc in the trajectory. So, on paper, a 215 is slightly better to 1500 yards. Change the energy level of the 230, you get a different answer.
You really cannot assume that the better trajectory and time of flight will translate to precision and accuracy in every gun. Sometimes, the gun forgets to read the book and decides to reverse the outcome.
In so many words, both good candidates and worthy of testing.
I use the Berger 220 Hybrid Targets in my 300-PRC ... with solid results using both Retumbo and H1000. Here's my favorite recipe:
Huh... a .333 bushing followed by a .308 mandrel 
What kind of final neck ID do you end up with that combination?
What kind of final neck ID do you end up with that combination?
