.300wm - .300wsm

[Pootyng]

Glad I found this thread. I have a 300 WSM with a 22" Proof CF en route. I have H4350 and RL16 available. Will be picking up Hornady brass unless Lapua becomes available soon.

I'd like to run 190gr Accubond LRs, but I cannot find a starting point for any of these combos. Am I looking at the wrong powders?

Have you looked at nosler’s website reloading data?

300 Winchester Short Magnum (WSM) Load Data

Explore the world of Nosler, renowned for crafting the finest bullets, ammunition, rifles, and brass. Discover our extensive lineup, including Partition, AccuBond, E-Tip, Ballistic Tip, Custom Competition, and more. Experience superior quality and performance with Nosler products.

www.nosler.com

 

[Eurodriver]

Have you looked at nosler’s website reloading data?

300 Winchester Short Magnum (WSM) Load Data

Explore the world of Nosler, renowned for crafting the finest bullets, ammunition, rifles, and brass. Discover our extensive lineup, including Partition, AccuBond, E-Tip, Ballistic Tip, Custom Competition, and more. Experience superior quality and performance with Nosler products.

www.nosler.com

I did, but it doesn't have any of the powders I own listed when I know H4350 can be used.

 

[64E]

I did, but it doesn't have any of the powders I own listed when I know H4350 can be used.

I worked up to pressure at 62.0 H4350, Norma brass, CCI 250’s, with 190 LRAB in a 24” Proof Carbon prefit. Backed off from there to my final load pushing them at 2880 fps. Seems to align closely with the 2209 data listed.

 

[BJames]

62.0 seems low for H4350 when Nosler calls for max loads of Hybrid 100v at 63.5 and Hunter at 65.0. H4350 burn rate is about smack in the middle of those 2. That speed though!

 

[64E]

62.0 seems low for H4350 when Nosler calls for max loads of Hybrid 100v at 63.5 and Hunter at 65.0. H4350 burn rate is about smack in the middle of those 2. That speed though!

Look at Hodgdon data for a 190 class projectile; https://hodgdonreloading.com/rldc/

 

[OkieMike]

It was a gorgeous day today. Temps were 75 to 80 degrees. Mostly overcast. Cool breeze. So I took advantage of it.

300 Win Mag

Lapua brass
Berger 208 LRHT
Federal 215 primers (Blue box, not FGMM)
Winchester Sta Ball HD
CBTO: 2.620" (COAL 3.655ish)

Shot from 30" x 1:10 tube.

Gun seems to like this combo. Velocity started in low 2900's and the top end was mid 3000's. Wife has the chronograph info on her phone, so I can edit in the velocities later if anyone asks. No pressure signs at all.

1 inch target dots.

Mike

 

[jugi16]

Does anyone know what powder Hornady uses in their 300 Win Mag 200 ELDX Precision Hunter load? Or been able to replicate the same type of performance. This stuff shoots very well in my rifle, but would like to reload for it.

 

[45-90]

Does anyone know what powder Hornady uses in their 300 Win Mag 200 ELDX Precision Hunter load? Or been able to replicate the same type of performance. This stuff shoots very well in my rifle, but would like to reload for it.

Hornady uses their own proprietary powder on many loads.... sometimes they tell ya many times they don't.
I had excellent accuracy with imr 7828 & high velocity Retumbo.
It’s a 26" factory barrel with Alum chassis with extra long mag box, so you can run 3.7" cartridges. The Retumbo load needs to be backed off about 1 grain...for my rifle.

 

[XP1K]

Hornady uses their own proprietary powder on many loads.... sometimes they tell ya many times they don't.
I had excellent accuracy with imr 7828 & high velocity Retumbo.
It’s a 26" factory barrel with Alum chassis with extra long mag box, so you can run 3.7" cartridges. The Retumbo load needs to be backed off about 1 grain...for my rifle.

3280 with a 200gr from a factory 27"tube. I gotta switch to retumbo.

 

[45-90]

3280 with a 200gr from a factory 27"tube. I gotta switch to retumbo.

I wanted the Remington 700 magnum action. It was $540 for a complete Rem 700 ADL 300 win mag 26" barrel on sale locally.
Before separating the barrel from the action let's see how accurate a $540 new Remington is, and what can be done to improve its performance.
Bought an aluminum chassis and threaded for a muzzle brake.
The Alum chassis allows for 3.715" mags or 3.850" mags
Not the 3.340" factory limitation.
Now one can add more powder to boost the power of the 300 Win Mag.
200 gr at 3200 fps with Retumbo, or 2962 fps for 230 gr SMK Alliant RL 50 from a new factory 700 ADL $540. Plus a $400 chassis and $90 brake.
The 300 Win Mag is still a great round.
But now its a .510 Whisper...
New bolt, new barrel....2 new match barrels .338 & .510...let the fun begin.

 

[XP1K]

300winmag
26" 1:9 bartlein 5R
215 hybrid 2.960" base to ogive, my comparator, my chamber. Your mileage may vary.
75.0gr N165, Norma brass, 215m primer.
Average velocity 2898 fps for seven shots. Es 52.6, sd 15.4.

First shot was slow, 2864 fps. Delete that one and es was 20.7.

Wasn't thrilled when the first shot broke and it wasn't where it should have been. 2,3,4 all in a ragged hole. Number 5 called bad. Had two rounds left, shots 6 and 7 fell in the center of the group.

Aside from the high es I'm happy with how it shoots. Tempted to back off the load .3 to .5 grains and see if that es/sd will come down. A couple of them clicked.