If anyone has any data on the 338 Lapua, I would like to know in general how far off the lands the bullet likes to sit. I realize all are a bit different but a good starting place would be great.
-
Having trouble using the site?
Contact support
338 Lapua bullet seating
- Thread starter DeadlyTedly
- Start date
Re: 338 Lapua bullet seating
i would like to know as well esp if anyone has any experience with the 300 gr bergers. my 110 BA is scoped up and ready to go just need a little reloading info
i would like to know as well esp if anyone has any experience with the 300 gr bergers. my 110 BA is scoped up and ready to go just need a little reloading info
Re: 338 Lapua bullet seating
load 5 stuffed 5 10thou out and 5 20 thou out and take hem to the range
load 5 stuffed 5 10thou out and 5 20 thou out and take hem to the range
Re: 338 Lapua bullet seating
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DeadlyTedly</div><div class="ubbcode-body">If anyone has any data on the 338 Lapua, I would like to know in general how far off the lands the bullet likes to sit. I realize all are a bit different but a good starting place would be great. </div></div>
What rifle are you shooting? Often times, it's easier o load to mag length and then see what shoots well.
This being said, I was one who got picked for the Berger 250gr hybrid test and instead of fiddling with powder, I played with seating length.
I can go right up to ~3.735" in my TRG-42 and be mag safe. The rifle has about 950 rounds down the pipe, so there's no doubt some throat errosion going on.
I did single feed most of these, which I've never really done over the six years I've shot the rifle.
Chris
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DeadlyTedly</div><div class="ubbcode-body">If anyone has any data on the 338 Lapua, I would like to know in general how far off the lands the bullet likes to sit. I realize all are a bit different but a good starting place would be great. </div></div>
What rifle are you shooting? Often times, it's easier o load to mag length and then see what shoots well.
This being said, I was one who got picked for the Berger 250gr hybrid test and instead of fiddling with powder, I played with seating length.
I can go right up to ~3.735" in my TRG-42 and be mag safe. The rifle has about 950 rounds down the pipe, so there's no doubt some throat errosion going on.
I did single feed most of these, which I've never really done over the six years I've shot the rifle.
Chris
Re: 338 Lapua bullet seating
Thanks, I appreciate the info. I am shooting a GA Precision Crusader in .338 Lapua, It shoots great with factory ammo but I know it is capable of much better.
Thanks, I appreciate the info. I am shooting a GA Precision Crusader in .338 Lapua, It shoots great with factory ammo but I know it is capable of much better.
Similar threads
