I will hopefully be needing asset of 34mm rings. Who makes them at a reasonable price? Is leupold the best price point?
Thanks,
Todd Conley
Thanks,
Todd Conley
-
Having trouble using the site?
Contact support
Rifle Scopes 34 mm rings where to get what kind?
- Thread starter toddconley
- Start date
Re: 34 mm rings where to get what kind?
i have a brand new set of aluminum TPS Medium(1.185") 34mm rings im not using ill let go if ur interested
i have a brand new set of aluminum TPS Medium(1.185") 34mm rings im not using ill let go if ur interested
Re: 34 mm rings where to get what kind?
Seekins
Badger Ordnance
TPS
I just picked up a set of Seekins 35mm rings. They are excellent. I don't think you would be disappointed with them.
Although my next set ( 34mm )of rings I'm seriouly considering American Rifle Company rings. Their concept sounds good and there have been very good reports of their use.
All of these rings are not inexpensive but that's the way it goes.
Seekins
Badger Ordnance
TPS
I just picked up a set of Seekins 35mm rings. They are excellent. I don't think you would be disappointed with them.
Although my next set ( 34mm )of rings I'm seriouly considering American Rifle Company rings. Their concept sounds good and there have been very good reports of their use.
All of these rings are not inexpensive but that's the way it goes.
Re: 34 mm rings where to get what kind?
I know there are lots of good ones but I am going to try not to spend so much. They are very pricey.
I know there are lots of good ones but I am going to try not to spend so much. They are very pricey.
Re: 34 mm rings where to get what kind?
Check out the "options & accessories" section here. Good deals to be had. I have a set of badger meds listed there as well.
Check out the "options & accessories" section here. Good deals to be had. I have a set of badger meds listed there as well.
Re: 34 mm rings where to get what kind?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: toddconley</div><div class="ubbcode-body">I know there are lots of good ones but I am going to try not to spend so much. They are very pricey.
</div></div>
I've had good luck with the Warne rings.
Warne 34mm Rings
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: toddconley</div><div class="ubbcode-body">I know there are lots of good ones but I am going to try not to spend so much. They are very pricey.
</div></div>
I've had good luck with the Warne rings.
Warne 34mm Rings
Re: 34 mm rings where to get what kind?
Yes thank you that is what I am looking for. They hold well for you? Will the ones with the levers hold up? Should you get the one without?
Thanks for the info,
T
Yes thank you that is what I am looking for. They hold well for you? Will the ones with the levers hold up? Should you get the one without?
Thanks for the info,
T
Re: 34 mm rings where to get what kind?
Cheap is false economy IMHO. If the rings aren't up to spec then you may need to lap them. If you don't have a lapping bar then with shipping etc you might well be in the $100 neighborhood already. Plus, think what you might lose in re-sale value on your scope if it's got ring marks as opposed to what you might save and you're already at the level of expenditure of a decent set of rings that will hold your scope, hold zero when you take them off and mount them again and protect your scope's finish and internals.
Just something to consider.
For my money and equipment, I don't think you'll do better than a set of these...
http://www.eurooptic.com/american-rifle-company-m3-scope-rings.aspx
Cheap is false economy IMHO. If the rings aren't up to spec then you may need to lap them. If you don't have a lapping bar then with shipping etc you might well be in the $100 neighborhood already. Plus, think what you might lose in re-sale value on your scope if it's got ring marks as opposed to what you might save and you're already at the level of expenditure of a decent set of rings that will hold your scope, hold zero when you take them off and mount them again and protect your scope's finish and internals.
Just something to consider.
For my money and equipment, I don't think you'll do better than a set of these...
http://www.eurooptic.com/american-rifle-company-m3-scope-rings.aspx
Re: 34 mm rings where to get what kind?
Another vote for Seekins rings. I have a set of 34mm and 30mm and they are the best rings for the money. And I've owned Badger, NF and Leupy rings as well. They are all fine, but I like the fact that seekins uses the same base screws as they do the ring tops, so you only need one torx driver for the whole thing. They are well made and great C/S as well.
Another vote for Seekins rings. I have a set of 34mm and 30mm and they are the best rings for the money. And I've owned Badger, NF and Leupy rings as well. They are all fine, but I like the fact that seekins uses the same base screws as they do the ring tops, so you only need one torx driver for the whole thing. They are well made and great C/S as well.
Re: 34 mm rings where to get what kind?
I have a set of 34mm Seekins on my PH, and am very happy with them. I know the temptation may be there, but don't skimp on bases/rings...it'll only piss you off in the long run.
I have a set of 34mm Seekins on my PH, and am very happy with them. I know the temptation may be there, but don't skimp on bases/rings...it'll only piss you off in the long run.
Re: 34 mm rings where to get what kind?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SHIFT_Sniper</div><div class="ubbcode-body">i have a brand new set of aluminum TPS Medium(1.185") 34mm rings im not using ill let go if ur interested </div></div>
I'd rather use Duct tape.
34mm scopes tend to cost $2k and up. Sport the $130 for a set of Seekins.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SHIFT_Sniper</div><div class="ubbcode-body">i have a brand new set of aluminum TPS Medium(1.185") 34mm rings im not using ill let go if ur interested </div></div>
I'd rather use Duct tape.
34mm scopes tend to cost $2k and up. Sport the $130 for a set of Seekins.
Re: 34 mm rings where to get what kind?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 19Scout77</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SHIFT_Sniper</div><div class="ubbcode-body">i have a brand new set of aluminum TPS Medium(1.185") 34mm rings im not using ill let go if ur interested </div></div>
I'd rather use Duct tape.
34mm scopes tend to cost $2k and up. Sport the $130 for a set of Seekins. </div></div>
How much do you think TPS rings cost? My 35mm set was $110. Right up there with Seekins and great quality. I wouldn't hesitate to mount any scope on the market in em.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 19Scout77</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SHIFT_Sniper</div><div class="ubbcode-body">i have a brand new set of aluminum TPS Medium(1.185") 34mm rings im not using ill let go if ur interested </div></div>
I'd rather use Duct tape.
34mm scopes tend to cost $2k and up. Sport the $130 for a set of Seekins. </div></div>
How much do you think TPS rings cost? My 35mm set was $110. Right up there with Seekins and great quality. I wouldn't hesitate to mount any scope on the market in em.
Re: 34 mm rings where to get what kind?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: THEBEARRRRRRJEW</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 19Scout77</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SHIFT_Sniper</div><div class="ubbcode-body">i have a brand new set of aluminum TPS Medium(1.185") 34mm rings im not using ill let go if ur interested </div></div>
I'd rather use Duct tape.
34mm scopes tend to cost $2k and up. Sport the $130 for a set of Seekins. </div></div>
How much do you think TPS rings cost? My 35mm set was $110. Right up there with Seekins and great quality. I wouldn't hesitate to mount any scope on the market in em. </div></div>
thats what I paid for mine the only reason I dont have em on cause I got a set of Badgers in the same time. Ive got 3 sets of TPS rings on various rifles and havent had any problems what so ever.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: THEBEARRRRRRJEW</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 19Scout77</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SHIFT_Sniper</div><div class="ubbcode-body">i have a brand new set of aluminum TPS Medium(1.185") 34mm rings im not using ill let go if ur interested </div></div>
I'd rather use Duct tape.
34mm scopes tend to cost $2k and up. Sport the $130 for a set of Seekins. </div></div>
How much do you think TPS rings cost? My 35mm set was $110. Right up there with Seekins and great quality. I wouldn't hesitate to mount any scope on the market in em. </div></div>
thats what I paid for mine the only reason I dont have em on cause I got a set of Badgers in the same time. Ive got 3 sets of TPS rings on various rifles and havent had any problems what so ever.
Re: 34 mm rings where to get what kind?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TrapperSGD</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: toddconley</div><div class="ubbcode-body">I know there are lots of good ones but I am going to try not to spend so much. They are very pricey. </div></div>I've had good luck with the Warne rings.</div></div>How much is your scope worth?
There's no sense stepping over dollars to pick up dimes.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TrapperSGD</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: toddconley</div><div class="ubbcode-body">I know there are lots of good ones but I am going to try not to spend so much. They are very pricey. </div></div>I've had good luck with the Warne rings.</div></div>How much is your scope worth?
There's no sense stepping over dollars to pick up dimes.
Re: 34 mm rings where to get what kind?
I know I know. I will get some good ones. Those warnes look great though. They are all steel aren't they?
I know I know. I will get some good ones. Those warnes look great though. They are all steel aren't they?
Similar threads
