45acp SMALL primer

I'm sure there is. I've got a buddy that loads on a single stage so he doesn't care either way. I load on a 550 so if the machine is set for large then that's what I'm doing. I just set them aside then trade one for one with him. I don't have the quantity that you have though. Since you have that many and with things the way they are now you may think about sorting and keeping them. What machine are you loading on?
 
I will use them for USPSA matches if it's a dead brass match. I will re-size/de-prime them, primer them with a Lee hand primer,and then run them back through my progressive die minus decapper and primers. They are a pain-in-the-ass in a progressive press if one gets mixed with large pistol brass...
 
What is a dead brass match

Probably one where either you aren't allowed to, or it wouldn't be practical to, pick up your brass after shooting a stage.

sawgunner nailed it. A lot of times there just isn't time to stop and pick up your brass between stages, or you're moving so much during stages that the brass is scattered all over the range.
 
[MENTION=41186]Jackalope33B[/MENTION] I got your PM- have tried responding to it a few times, however I'm not sure if any of them went thru. I hit submit message but then afterwards none of them are in my Sent Items folder (even though I checked the box to do so). If you didn't receive them send me another PM (since you're apparently able to send them) with a phone #.
 
Last edited: