Suppressors 5.56 with 7.62 can?
- Thread starter bburke1989
- Start date
Re: 5.56 with 7.62 can?
Sound reduction is very good, what you loose in dia. difference you make up for in baffles. But you have to watch you rate of fire. Heat can become a issue if your not careful.
Sound reduction is very good, what you loose in dia. difference you make up for in baffles. But you have to watch you rate of fire. Heat can become a issue if your not careful.
Re: 5.56 with 7.62 can?
I was running my AAC Cyclone on a 5.56 AR just yesterday and was impressed with the level of suppression. I'm not a fan of shooting suppressed AR/M16 because of the gas and crap that gets projected back toward your face. However, I didn't notice it that much yesterday. Although, this was on a 16" barreled gun, I've ran the same suppressor on my 14.5" M4 barrel and I remember it getting a lot more gas.
Anyway, to answer your question I'm content with 7.62 suppressor on 5.56 platform.
I was running my AAC Cyclone on a 5.56 AR just yesterday and was impressed with the level of suppression. I'm not a fan of shooting suppressed AR/M16 because of the gas and crap that gets projected back toward your face. However, I didn't notice it that much yesterday. Although, this was on a 16" barreled gun, I've ran the same suppressor on my 14.5" M4 barrel and I remember it getting a lot more gas.
Anyway, to answer your question I'm content with 7.62 suppressor on 5.56 platform.
Re: 5.56 with 7.62 can?
I have run a .30 cal can on multiple host weapons. Literally, from .22LR up to 300 Weatherby magnum rifles. There has not been a problem at all.... Still hearing safe.... Normally on .22 calibers you need a thread conversion if you are running a 5/8. Good shooting.... I have both an Ops Inc and Gemtech in .30 cal.
I have run a .30 cal can on multiple host weapons. Literally, from .22LR up to 300 Weatherby magnum rifles. There has not been a problem at all.... Still hearing safe.... Normally on .22 calibers you need a thread conversion if you are running a 5/8. Good shooting.... I have both an Ops Inc and Gemtech in .30 cal.
Re: 5.56 with 7.62 can?
I've used a .30 cal suppressor on a 16" 5.56mm with favorable results. As it was explained to me, the extra baffles and volume of the .30 cal help offset the additional gas that escapes from the increased endcap and baffles diameter.
I've used a .30 cal suppressor on a 16" 5.56mm with favorable results. As it was explained to me, the extra baffles and volume of the .30 cal help offset the additional gas that escapes from the increased endcap and baffles diameter.
Re: 5.56 with 7.62 can?
thanks guys! sent in the paperwork for a osprey 45 and tbac 30ba. figured i can shoot them on a glock 23 and a couple diffrent rifles till i can save up for some more. next will have to be a 22 can and paperwork for a sbr.
thanks guys! sent in the paperwork for a osprey 45 and tbac 30ba. figured i can shoot them on a glock 23 and a couple diffrent rifles till i can save up for some more. next will have to be a 22 can and paperwork for a sbr.
Re: 5.56 with 7.62 can?
I run an AAC 7.62SD on my KAC S..its sweet...quiet, smooth functioning and reliable...poi shift was greater than on 308 bolt gun, but predictable and consistent
I run an AAC 7.62SD on my KAC S..its sweet...quiet, smooth functioning and reliable...poi shift was greater than on 308 bolt gun, but predictable and consistent
Re: 5.56 with 7.62 can?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bburke1989</div><div class="ubbcode-body">thanks guys! sent in the paperwork for a osprey 45 and tbac 30ba. figured i can shoot them on a glock 23 and a couple diffrent rifles till i can save up for some more. next will have to be a 22 can and paperwork for a sbr. </div></div>
I'm waiting on a stamp for an osprey 45 and a 30p-1 is in the works. I figured these 2 will cover most of my guns for now. Next for me will be a .556 can
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bburke1989</div><div class="ubbcode-body">thanks guys! sent in the paperwork for a osprey 45 and tbac 30ba. figured i can shoot them on a glock 23 and a couple diffrent rifles till i can save up for some more. next will have to be a 22 can and paperwork for a sbr. </div></div>
I'm waiting on a stamp for an osprey 45 and a 30p-1 is in the works. I figured these 2 will cover most of my guns for now. Next for me will be a .556 can
Re: 5.56 with 7.62 can?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bburke1989</div><div class="ubbcode-body">thanks guys! sent in the paperwork for a osprey 45 and tbac 30ba. figured i can shoot them on a glock 23 and a couple diffrent rifles till i can save up for some more. next will have to be a 22 can and paperwork for a sbr. </div></div>
that was my thinking, I still only have 1
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bburke1989</div><div class="ubbcode-body">thanks guys! sent in the paperwork for a osprey 45 and tbac 30ba. figured i can shoot them on a glock 23 and a couple diffrent rifles till i can save up for some more. next will have to be a 22 can and paperwork for a sbr. </div></div>
that was my thinking, I still only have 1
